Re: Getting Maestro-3i to work in FreeBSD 4.5

I tried Kload but it gave me lots of errors about it already being loaded
thats why I had to put it in the loader.conf

On Wed, 27 Mar 2002, Martin Stiemerling wrote:

> Hi
> 
> I'm running a Dell Inspirion 8000 with a Maestro 3 as well (hope that's
> exactly the same..). I'm using the maestro3 module, instead of compiling 
> the pcm support into the kernel, because I had same problems with this 
> (but can't remember them :-( ) Try kldload snd_maestro3 .
> 
> My output of /dev/sndstat:
> FreeFreeBSD Audio Driver (newpcm) Jan 31 2002 19:25:31
> Installed devices:
> pcm0: <ESS Technology Maestro3> at io 0xdc00 irq 5 (1p/1r/0v channels 
> duplex)
> 
> 
> Martin
> 
> > device pcm0 at isa? irq 10 drq 1 flags 0x0 # for non-PnP sound cards
> > device pcm # for PnP/PCI sound cards
> > 
> > Then after doing that I believe during the boot sequence I got a message
> > stating to the fact that the driver cannot be loaded through the kernel
> > due to licensing restrictions and to add a line to my loader.conf which
> > was the following
> > 
> > snd_maestro3_load="YES"
> > 
> > Now when I do a cat /dev/sndstat instead of device not configured I get
> > the following.
> > 
> > # cat /dev/sndstat
> > FreeBSD Audio Driver (newpcm) Mar 25 2002 14:26:45
> > Installed devices:
> > pcm0: <ESS Technology Maestro3> at io 0xd800 irq 5 (1p/1r/0v channels
> > duplex)
> > 
> > But when I do startx with KDE I get the following message
> > 
> > Sound Server Informational Message
> > 
> > Error while initializing the sound driver
> > device /dev/desp can't be opened (Device not configured)
> > 
> > The sound server will continue, using the null output device
> > 
> > Ok well that sucks. So I popped up a shell and did cat /dev/dsp and cat
> > /dev/audio and both say Device not configured?
> > 
> > Can anyone tell me what exactly I did wrong if anything and possibly a
> > fix.
> > 
> > Would be most Appreciated
> > 
> > Thanks
> > 
> > Thomas B
> > 
> > 
> > To Unsubscribe: send mail to [email protected]
> > with "unsubscribe freebsd-mobile" in the body of the message
> > 
> 
> 
> 
> -- 
> Martin Stiemerling
> 
> NEC Europe Ltd. -- Network Laboratories  [email protected]
> IPv4: http://www.ccrle.nec.de  IPv6: http://www.ipv6.ccrle.nec.de
> 
> 
> To Unsubscribe: send mail to [email protected]
> with "unsubscribe freebsd-mobile" in the body of the message
> 


To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message