https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=271474
Stephen Fox <[email protected]> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |[email protected]
--- Comment #5 from Stephen Fox <[email protected]> ---
I ran into this issue as well under in a similar scenario (trying to run
a bhyve VM from a jail). While trying to understand this issue, I have been
doing a lot of "ls /dev" and "ls /dev/tapN"... and I realized that
"ls -l /dev/tapN" creates an entry in "/dev"...
```
root@x:/etc/jail.conf.d # ifconfig tap4141
ifconfig: interface tap4141 does not exist
root@x:/etc/jail.conf.d # ls -l /dev | grep tap4141
root@x:/etc/jail.conf.d # ls -l /dev/tap4141
crw------- 1 uucp dialer 0x70 Apr 20 12:53 /dev/tap4141
root@x:/etc/jail.conf.d # ifconfig tap4141
tap4141: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
ether 58:9c:fc:10:97:4a
groups: tap
media: Ethernet 1000baseT <full-duplex>
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
```
Needless to say - this is not the behavior I expected.
The steps to reproduce the issue described by Joshua appear to be:
```
service jail start lose-tap-example
jexec lose-tap-example ls -l /dev/tap41
service jail stop lose-tap-example
```
Here is the jail configuration file ("/etc/jail.conf.d/lose-tap-example.conf"):
```
lose-tap-example {
path = "/zroot/jails/${name}";
mount.devfs;
vnet;
exec.start += "/bin/sh /etc/rc";
exec.stop += "/bin/sh /etc/rc.shutdown";
}
```
The host system and jail versions:
```
# freebsd-version -uk
14.0-RELEASE-p5
14.0-RELEASE-p5
# jexec lose-tap-example freebsd-version -u
14.0-RELEASE-p6
```
And here is what it looks like from a shell for more context:
```
root@x:~ # ls -l /dev | grep tap
root@x:~ # service jail start lose-tap-example
Starting jails: lose-tap-example.
root@x:~ # jexec lose-tap-example ifconfig
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@x:~ # jexec lose-tap-example ls -l /dev/tap41
ls: /dev/tap41: No such file or directory
root@x:~ # jexec lose-tap-example ifconfig
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
tap41: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
ether 52:72:e6:7e:7c:ab
groups: tap
media: Ethernet 1000baseT <full-duplex>
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
root@x:~ # service jail stop lose-tap-example
Stopping jails: lose-tap-example.
root@x:~ # ifconfig
vtnet0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
options=80028<VLAN_MTU,JUMBO_MTU,LINKSTATE>
ether (...)
inet (...) netmask 0xffffff00 broadcast (...)
media: Ethernet autoselect (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384
options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
groups: lo
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
root@x:~ # ifconfig tap41 create
ifconfig: interface tap41 already exists
root@x:~ # rm /dev/tap41
root@x:~ # ifconfig tap41 create
ifconfig: interface tap41 already exists
```
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.