[Bug 282095] enic breaks when changing MTU on interfaces with fib other than 0
| Newsgroups | gmane.os.freebsd.devel.net |
|---|---|
| Message-ID | <[email protected]/bugzilla/> |
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=282095 Zhenlei Huang <[email protected]> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |[email protected] --- Comment #1 from Zhenlei Huang <[email protected]> --- I have a two ports Chelsio T520-CR card. With the default MTU 1500, either TCP or UDP mode iperf3 can easily reach ~9.6Gbps. For UDP the loss rate is also negligible. I think only ~3.7Gb/s for a 10G nic with default MTU 1500 is not reasonable. Well the enic(4) driver was introduced on Feb 6 2023. That is quite new. I moved cxl1 to a separated vnet while doing the benchmark. For multiple fibs setup, the result is similar. ``` # jail -ic vnet persist 1 # ifconfig cxl1 vnet 1 # jexec 1 ifconfig cxl1 inet 192.168.99.1/31 # jexec 1 iperf3 -sD # ifconfig cxl0 inet 192.168.99.0/31 # iperf3 -ub0 -c 192.168.99.1 Connecting to host 192.168.99.1, port 5201 [ 5] local 192.168.99.0 port 19631 connected to 192.168.99.1 port 5201 [ ID] Interval Transfer Bitrate Total Datagrams [ 5] 0.00-1.00 sec 1.11 GBytes 9.56 Gbits/sec 819173 [ 5] 1.00-2.00 sec 1.11 GBytes 9.57 Gbits/sec 819938 [ 5] 2.00-3.00 sec 1.11 GBytes 9.57 Gbits/sec 819165 [ 5] 3.00-4.00 sec 1.11 GBytes 9.57 Gbits/sec 819298 [ 5] 4.00-5.00 sec 1.11 GBytes 9.57 Gbits/sec 819118 [ 5] 5.00-6.00 sec 1.11 GBytes 9.57 Gbits/sec 818958 [ 5] 6.00-7.00 sec 1.11 GBytes 9.56 Gbits/sec 818553 [ 5] 7.00-8.00 sec 1.11 GBytes 9.57 Gbits/sec 819750 [ 5] 8.00-9.00 sec 1.11 GBytes 9.56 Gbits/sec 818532 [ 5] 9.00-10.00 sec 1.11 GBytes 9.58 Gbits/sec 819819 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams [ 5] 0.00-10.00 sec 11.1 GBytes 9.57 Gbits/sec 0.000 ms 0/8192304 (0%) sender [ 5] 0.00-10.00 sec 11.1 GBytes 9.56 Gbits/sec 0.000 ms 743/8189808 (0.0091%) receiver ``` -- You are receiving this mail because: You are the assignee for the bug.