https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=282744
--- Comment #4 from Vladyslav V. Prodan <[email protected]> ---
(In reply to Marek Zarychta from comment #2)
Thank you, it helped.
root@vb-14-1:~ # ifconfig em2 inet 192.168.77.104/24 fib 1 up
root@vb-14-1:~ # ifconfig em2
em2: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 15 00
options=48505bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM
,TSO4,LRO,VLAN_HWFILTER,VLAN_HWTSO,HWSTATS,MEXTPG>
ether 08:00:27:33:a3:63
inet 192.168.77.104 netmask 0xffffff00 broadcast 192.168.77.255
inet6 fe80::a00:27ff:fe33:a363%em2 prefixlen 64 scopeid 0x3
fib: 1
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
root@vb-14-1:~ # route add default 192.168.77.2 -fib 1
add net default: gateway 192.168.77.2 fib 1
root@vb-14-1:~ # netstat -rnF 1
Routing tables (fib: 1)
Internet:
Destination Gateway Flags Netif Expire
default 192.168.77.2 UGS em2
127.0.0.1 link#5 UHS lo0
192.168.77.0/24 link#3 U em2
192.168.77.104 link#5 UHS lo0
Internet6:
Destination Gateway Flags Netif
Exp ire
::/96 link#5 URS lo0
::1 link#5 UHS lo0
::ffff:0.0.0.0/96 link#5 URS lo0
fe80::%lo0/10 link#5 URS lo0
ff02::/16 link#5 URS lo0
But! for ipv6 addresses to appear in fib 1, you need to reboot the system...
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.