Re: Static vxlan configuration fails - probably because of wrong order in rc

"Patrick M. Hausen" <[email protected]>
Newsgroups gmane.os.freebsd.devel.net
Message-ID <[email protected]> 
Hi!

> Am 26.08.2025 um 20:02 schrieb John Baldwin <[email protected]>:
> 
> On 8/22/25 17:30, Patrick M. Hausen wrote:
>> Hi,
>>> Am 22.08.2025 um 21:02 schrieb John Baldwin <[email protected]>:
>>> 
>>> A verbose dmesg of the two cases would probably be helpful.
>> I set verbose_loading="YES", then booted two times, once without, once
>> with if_smsc_load="YES".
>> --------
>> $ diff dmesg-not-loaded.txt dmesg-loaded.txt
>> 10a11
>>> module smsc already present!
>> 12c13
>> < avail memory = 945016832 (901 MB)
>> ---
>>> avail memory = 944844800 (901 MB)
>> 178a180
>>> vxlan0: Ethernet address: 58:9c:fc:00:82:82
>> 182d183
>> < vxlan0: Ethernet address: 58:9c:fc:00:82:82
>> --------
> 
> That's not the full dmesg, just a diff.

I was reluctant to spam the list with two full dmesg outputs if just a small part
is probably relevant. Thought a diff would catch it.

Anyway I'll add both as an attachment - hope that passes the list server.

> A more general fix would be to add support for a 'vxlans_<IF>'
> variable similar to `vlans_<IF>' which would be a list of child vxlan
> interfaces.   You would then just need `vxlans_ue0="vxlan0"` instead of
> cloned_interfaces="vxlan0" in rc.conf.

That's actually the most interesting suggestion because shell scripting is what
I can do and I am familiar with that mechanism having used e.g. vlans_igb0...
for years. I'll try to implement and submit that possibly in the coming week.
OTOH there are still two EuroBSCCon presentations to be done, atm. :-)

Thanks!
Patrick
-- 
punkt.de GmbH
Patrick M. Hausen
.infrastructure

Sophienstr. 187
76185 Karlsruhe

Tel. +49 721 9109500

https://infrastructure.punkt.de
[email protected]

AG Mannheim 108285
Geschäftsführer: Daniel Lienert, Fabian Stein
dmesg-loaded.txt (text/plain, 9.5 KB) 
---<<BOOT>>---
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC arm64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 656x416
module scmi already present!
module smsc already present!
real memory  = 994041856 (947 MB)
avail memory = 944844800 (901 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 17 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 20 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
usbus1 on bcm283x_dwcotg0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0
gpioc1: <GPIO controller> on gpio1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 15.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <ACT> failed to map pin
armv8crypto0: CPU lacks AES instructions
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN 2BD2FA7A MFG 11/2020 by 21 0x0000> at mmc0 41.6MHz/4bit/65535-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 4MB partition 3 at mmcsd0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
 Instruction Set Attributes 1 = <>
 Instruction Set Attributes 2 = <>
         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
         Processor Features 2 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
      Memory Model Features 3 = <>
      Memory Model Features 4 = <>
             Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
lintc0: using for IPIs
Release APs...done
TCP_ratelimit: Is now initialized
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
uhub0: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
vxlan0: Ethernet address: 58:9c:fc:00:82:82
ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
smsc0: MAC address found in bootargs b8:27:eb:a4:3f:b1.
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:a4:3f:b1
ue0: link state changed to DOWN
lo0: link state changed to UP
ue0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
dmesg-not-loaded.txt (text/plain, 9.5 KB) 
---<<BOOT>>---
WARNING: Cannot find freebsd,dts-version property, cannot check DTB compliance
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC arm64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 656x416
module scmi already present!
real memory  = 994041856 (947 MB)
avail memory = 945016832 (901 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
bcm2835_firmware0: <BCM2835 Firmware> on simplebus0
ofw_clkbus1: <OFW clocks bus> on bcm2835_firmware0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
lintc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 39 on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 7,8 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Raspberry Pi Firmware GPIO controller> on bcm2835_firmware0
gpiobus1: <GPIO bus> on gpio1
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 6 on simplebus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
generic_timer0: <ARMv7 Generic Timer> irq 1,2,3,4 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38 on simplebus0
usb_nop_xceiv0: <USB NOP PHY> on ofwbus0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
bcm2835_clkman0: <BCM283x Clock Manager> mem 0x7e101000-0x7e102fff on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 9 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e2041ff irq 11 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 17 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 20 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 21,22 on simplebus0
usbus1 on bcm283x_dwcotg0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023 on simplebus0
bcmrng0: <Broadcom BCM2835/BCM2838 RNG> mem 0x7e104000-0x7e10400f irq 40 on simplebus0
gpioc1: <GPIO controller> on gpio1
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fb0: keeping existing fb bpp of 32
fbd0 on fb0
WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD 15.0.
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 32bpp
fb0: fbswap: 1, pitch 2624, base 0x3eaf0000, screen_size 1091584
pmu0: <Performance Monitoring Unit> irq 0 on ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
clk_fixed2: clock-fixed has no clock-frequency
clk_fixed2: clock-fixed has no clock-frequency
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <ACT> failed to map pin
armv8crypto0: CPU lacks AES instructions
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <DWCOTG OTG Root HUB> at usbus1
uhub0 on usbus1
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmcsd0: 31GB <MMCHC BJTD4R 0.3 SN 2BD2FA7A MFG 11/2020 by 21 0x0000> at mmc0 41.6MHz/4bit/65535-block
mmcsd0boot0: 4MB partition 1 at mmcsd0
mmcsd0boot1: 4MB partition 2 at mmcsd0
mmcsd0rpmb: 4MB partition 3 at mmcsd0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
                   Cache Type = <64 byte D-cacheline,64 byte I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
 Instruction Set Attributes 0 = <CRC32>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
 Instruction Set Attributes 1 = <>
 Instruction Set Attributes 2 = <>
         Processor Features 0 = <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <>
         Processor Features 2 = <>
      Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit ASID,1TB PA>
      Memory Model Features 1 = <8bit VMID>
      Memory Model Features 2 = <32bit CCIDX,48bit VA>
      Memory Model Features 3 = <>
      Memory Model Features 4 = <>
             Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3,Debugv8>
             Debug Features 1 = <>
         Auxiliary Features 0 = <>
         Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <CRC32,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP DP Conv,SIMDHP SP Conv,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
lintc0: using for IPIs
Release APs...done
TCP_ratelimit: Is now initialized
Warning: no time-of-day clock registered, system time will not be set accurately
Dual Console: Serial Primary, Video Secondary
uhub0: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x0424 product 0x9514> at usbus1
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus1
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen1.3: <vendor 0x0424 product 0xec00> at usbus1
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus1
vxlan0: Ethernet address: 58:9c:fc:00:82:82
smsc0: MAC address found in bootargs b8:27:eb:a4:3f:b1.
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: b8:27:eb:a4:3f:b1
ue0: link state changed to DOWN
lo0: link state changed to UP
ue0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.