VPP on FreeBSD Stable 14.3

Folks,
I was wondering folks who run vpp on FreeBSD,
1) when I run vpp  ssh on the management nic becomes un responsive...
2) is there a recommended freeBSD /etc/vpp/startup.conf file   that
works well for FreeBSD ?

i have a virtio NIC for management

Im trying out FreeBSD with VPP inside a PRoxmox Hosted VM with  Intel
IOMMU (not virtio-iommu)    8GB RAM 2 sockets 1 core,  assigned to the
VM,


my /boot/loader.conf
cat /boot/loader.conf
boot_multicons=YES
boot_serial=YES
comconsole_speed=115200
console="comconsole,vidconsole"
contigmem_load="YES"
nic_uio_load="YES"
hw.contigmem.num_buffers=4
hw.contigmem.buffer_size=1073741824
hw.nic_uio.bdfs="1:0:0,2:0:0"



dmesg output
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git
llvmorg-19.1.7-0-gcd708029e0b2)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.81-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x283<FSGSBASE,TSCADJ,SMEP,ERMS>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended
Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  IA32_ARCH_CAPS=0xc000048<SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 8589934592 (8192 MB)
avail memory = 8251035648 (7868 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
nic_uio: hw.nic_uio.bdfs = '1:0:0,2:0:0'
 0: virt=0xfffffe008ec00000 phys=0x140000000
 1: virt=0xfffffe00cec00000 phys=0x180000000
 2: virt=0xfffffe010ec00000 phys=0x1c0000000
 3: virt=0xfffffe014ec00000 phys=0x200000000
vtvga0: <VT VGA driver>
kvmclock0: <KVM paravirtual clock>
Timecounter "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered as a time-of-day clock, resolution 0.000001s
smbios0: <System Management BIOS> at iomem 0xf5200-0xf521e
smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BOCHS BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem
0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 16
at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 17
at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 18
at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16
at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at
device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nic_uio_probe: probed dev=0xfffff80003a11700
nic_uio0: <DPDK PCI Device> mem
0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device
0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at
device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
nic_uio_probe: probed dev=0xfffff800038ad800
nic_uio1: <DPDK PCI Device> mem
0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device
0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at
device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at
device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 16
at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 17
at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x50e0-0x50ff irq 18
at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at
device 1.0 on pci5
pci6: <ACPI PCI bus> on pcib6
virtio_pci0: <VirtIO PCI (legacy) Network adapter> port 0x4000-0x401f
mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at
device 18.0 on pci6
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: bc:24:11:2a:4f:f2
vtnet0: netmap queues/slots: TX 1/256, RX 1/512
000.000121 [ 452] vtnet_netmap_attach       vtnet attached txq=1,
txd=256 rxq=1, rxd=512
pcib7: <ACPI PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at
device 2.0 on pci5
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at
device 3.0 on pci5
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at
device 4.0 on pci5
pci9: <ACPI PCI bus> on pcib9
virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0x1000-0x103f mem
0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device
1.0 on pci9
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x5100-0x511f mem
0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
vmgenc0: <VM Generation Counter> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
Timecounters tick every 10.000 msec
Trying to mount root from ufs:/dev/da0s1a [rw]...
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen7.1: <Intel EHCI root HUB> at usbus7
uhub0 on usbus6
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub1 on usbus7
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub2 on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub4 on usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub5 on usbus1
uhub6 on usbus2
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub7 on usbus0
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
da0 at vtscsi0 bus 0 scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub1: 6 ports with 6 removable, self powered
uhub2: 6 ports with 6 removable, self powered
WARNING: / was not properly dismounted
Dual Console: Serial Primary, Video Secondary
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq
16 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
vtnet0: link state changed to UP
nic_uio0: Bar 0 @ 383800000000, size 10000
nic_uio0: Bar 3 @ 383800010000, size 4000
nic_uio1: Bar 0 @ 383000000000, size 10000
nic_uio1: Bar 3 @ 383000010000, size 4000
nic_uio0: Bar 0 @ 383800000000, size 10000
nic_uio0: Bar 3 @ 383800010000, size 4000
nic_uio1: Bar 0 @ 383000000000, size 10000
nic_uio1: Bar 3 @ 383000010000, size 4000
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 0 0 done
All buffers synced.
Uptime: 28m16s
uhub1: detached
uhub0: detached
uhub3: detached
uhub4: detached
uhub2: detached
uhub6: detached
uhub5: detached
uhub7: detached
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git
llvmorg-19.1.7-0-gcd708029e0b2)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.22-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x306e4  Family=0x6  Model=0x3e  Stepping=4
  Features=0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  Structured Extended Features=0x283<FSGSBASE,TSCADJ,SMEP,ERMS>
  Structured Extended Features2=0x4<UMIP>
  Structured Extended
Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  IA32_ARCH_CAPS=0xc000048<SKIP_L1DFL_VME>
  AMD Extended Feature Extensions ID EBX=0x100d000<IBPB,IBRS,STIBP,SSBD>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
Hypervisor: Origin = "KVMKVMKVM"
real memory  = 8589934592 (8192 MB)
avail memory = 8251035648 (7868 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <BOCHS  BXPC    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
Launching APs: 1
random: entropy device external interface
kbd1 at kbdmux0
nic_uio: hw.nic_uio.bdfs = '1:0:0,2:0:0'
 0: virt=0xfffffe008ec00000 phys=0x140000000
 1: virt=0xfffffe00cec00000 phys=0x180000000
 2: virt=0xfffffe010ec00000 phys=0x1c0000000
 3: virt=0xfffffe014ec00000 phys=0x200000000
vtvga0: <VT VGA driver>
kvmclock0: <KVM paravirtual clock>
Timecounter "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered as a time-of-day clock, resolution 0.000001s
smbios0: <System Management BIOS> at iomem 0xf5200-0xf521e
smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BOCHS BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 100000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem
0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB controller> port 0x5040-0x505f irq 16
at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq 17
at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0x5080-0x509f irq 18
at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I HDA Controller> mem 0xfea10000-0xfea13fff irq 16
at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq 16 at
device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nic_uio_probe: probed dev=0xfffff80003a0f700
nic_uio0: <DPDK PCI Device> mem
0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device
0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> mem 0xfea17000-0xfea17fff irq 16 at
device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
nic_uio_probe: probed dev=0xfffff800037b0800
nic_uio1: <DPDK PCI Device> mem
0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device
0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> mem 0xfea18000-0xfea18fff irq 16 at
device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem 0xfea19000-0xfea19fff irq 16 at
device 28.3 on pci0
pci4: <ACPI PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB controller> port 0x50a0-0x50bf irq 16
at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq 17
at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0x50e0-0x50ff irq 18
at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem
0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff irq 21 at
device 1.0 on pci5
pci6: <ACPI PCI bus> on pcib6
virtio_pci0: <VirtIO PCI (legacy) Network adapter> port 0x4000-0x401f
mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at
device 18.0 on pci6
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
vtnet0: Ethernet address: bc:24:11:2a:4f:f2
vtnet0: netmap queues/slots: TX 1/256, RX 1/512
000.000121 [ 452] vtnet_netmap_attach       vtnet attached txq=1,
txd=256 rxq=1, rxd=512
pcib7: <ACPI PCI-PCI bridge> mem 0xfe001000-0xfe0010ff irq 22 at
device 2.0 on pci5
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> mem 0xfe002000-0xfe0020ff irq 23 at
device 3.0 on pci5
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> mem 0xfe003000-0xfe0030ff irq 20 at
device 4.0 on pci5
pci9: <ACPI PCI bus> on pcib9
virtio_pci1: <VirtIO PCI (legacy) SCSI adapter> port 0x1000-0x103f mem
0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device
1.0 on pci9
vtscsi0: <VirtIO SCSI Adapter> on virtio_pci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0x5100-0x511f mem
0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_syscontainer0: <System Container> on acpi0
vmgenc0: <VM Generation Counter> on acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 on acpi0
acpi_syscontainer2: <System Container> port 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
pnpid PNP0900 on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
Timecounters tick every 10.000 msec
Trying to mount root from ufs:/dev/da0s1a [rw]...
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
uhub0 on usbus7
uhub1 on usbus6
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub2 on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub4 on usbus2
uhub5 on usbus3
uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub6 on usbus0
uhub7 on usbus1
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
da0 at vtscsi0 bus 0 scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub6: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub0: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Dual Console: Serial Primary, Video Secondary
ichsmb0: <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq
16 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link state changed to UP
vtnet0: link state changed to UP