[Bug 282805] Support for Aquantia AQC113 and AQC113C Ethernet Controllers

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=282805

--- Comment #15 from Thomas Kupper <[email protected]> ---
I have simply added the device ID's and setting the speed capabilities. I
wonder if anyone would test the patch on 14.3-RELEASE (15+ doesn't compile).

There is no obvious place where there is model specific code, so it may work :)

The ID's and speed capabilities are taken from OpenBSD.

Repo/branch: https://git.sr.ht/~patient0/FreeBSD-ports/refs/AQC113 and the
patch below:

Add device IDs and set hardware capabilities for
AQC113/113C/113CA/113CS, values taken from OpenBSD

---
 net/aquantia-atlantic-kmod/Makefile           |  2 +-
 .../files/patch-aq__main.c                    | 42 +++++++++++++++++++
 2 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/net/aquantia-atlantic-kmod/Makefile
b/net/aquantia-atlantic-kmod/Makefile
index
79f736182dbd9eb3385cbed43afa1ffbc8e52973..1807203ddc5fca3e5fa384fbc0a4da58ff25c24b
100644
--- a/net/aquantia-atlantic-kmod/Makefile
+++ b/net/aquantia-atlantic-kmod/Makefile
@@ -1,6 +1,6 @@
 PORTNAME=      aquantia-atlantic-kmod
 PORTVERSION=   0.0.5
-PORTREVISION=  3
+PORTREVISION=  4
 CATEGORIES=    net

 MAINTAINER=    [email protected]
diff --git a/net/aquantia-atlantic-kmod/files/patch-aq__main.c
b/net/aquantia-atlantic-kmod/files/patch-aq__main.c
index
dea156a428fa3c5edc2e9ed5278072eabb42ef15..091899f3ddab8befc927b78ead0f35b3710e5115
100644
--- a/net/aquantia-atlantic-kmod/files/patch-aq__main.c
+++ b/net/aquantia-atlantic-kmod/files/patch-aq__main.c
@@ -13,3 +13,45 @@

  MODULE_DEPEND(atlantic, pci, 1, 1, 1);
  MODULE_DEPEND(atlantic, ether, 1, 1, 1);
+--- aq_main.orig       2025-10-04 07:50:15.419816000 +0200
++++ aq_main.c  2025-10-04 08:37:40.357656000 +0200
+@@ -101,7 +101,12 @@
+ #define AQ_DEVICE_ID_AQC109   0x09B1
+ #define AQ_DEVICE_ID_AQC111   0x11B1
+ #define AQ_DEVICE_ID_AQC112   0x12B1
++#define AQ_DEVICE_ID_AQC113   0x04c0
+ 
++#define AQ_DEVICE_ID_AQC113C  0x14c0
++#define AQ_DEVICE_ID_AQC113CA 0x34c0
++#define AQ_DEVICE_ID_AQC113CS 0x94c0
++
+ #define AQ_DEVICE_ID_AQC100S  0x80B1
+ #define AQ_DEVICE_ID_AQC107S  0x87B1
+ #define AQ_DEVICE_ID_AQC108S  0x88B1
+@@ -130,6 +135,11 @@
+       PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC111S, "Aquantia AQtion 5Gbit
Network Adapter"),
+       PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC112S, "Aquantia AQtion 2.5Gbit
Network Adapter"),
+ 
++      PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC113, "Aquantia AQtion 10Gbit
Network Adapter"),
++      PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC113C, "Aquantia AQtion 10Gbit
Network Adapter"),
++      PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC113CA, "Aquantia AQtion 10Gbit
Network Adapter"),
++      PVID(AQUANTIA_VENDOR_ID, AQ_DEVICE_ID_AQC113CS, "Aquantia AQtion 10Gbit
Network Adapter"),
++
+       PVID_END
+ };
+ 
+@@ -1097,6 +1107,14 @@
+       case AQ_DEVICE_ID_AQC112S:
+               softc->media_type = AQ_MEDIA_TYPE_TP;
+               softc->link_speeds = AQ_LINK_ALL & ~(AQ_LINK_10G | AQ_LINK_5G);
++              break;
++
++      case AQ_DEVICE_ID_AQC113:
++      case AQ_DEVICE_ID_AQC113C:
++      case AQ_DEVICE_ID_AQC113CA:
++      case AQ_DEVICE_ID_AQC113CS:
++              softc->media_type = AQ_MEDIA_TYPE_TP;
++              softc->link_speeds = AQ_LINK_ALL;
+               break;
+ 
+       default:

-- 
You are receiving this mail because:
You are the assignee for the bug.