Re: FBSD 15 :: if_bridge help needed

Paul Procacci <[email protected]>
Newsgroups gmane.os.freebsd.devel.net
Message-ID <CAFbbPuhiLsWcjbVD9F_RH+Q+5b2BZcAnLK2h3AqiJjkcOkxaMQ@mail.gmail.com>
On Wed, Oct 8, 2025 at 3:40 AM Lexi Winter <[email protected]> wrote:
>
> Paul Procacci wrote in <CAFbbPuiX=uzsrH8u=2+0=dEmPU1cg7SX5AwYz=hXM=4KPCrE_A@mail.gmail.com>:
> > I have some debugging information that I just acquired if it helps.
> > I have determined that the bridge isn't receiving arp requests that
> > are being sent by Jail 1; the machine with the trunk
> >
> > I have also determined that the bridge *is* receiving arp requests
> > from Jail 2; the machine that is labeled as 'access' or untagged.
> >
> > The only difference between the two here is that in my scenario, Jail
> > 1 does it's own tagging while Jail 2 doesn't and leans on the bridge
> > for its `access'.
>
> could you please run tcpdump -ev on the epair interface attached to the
> bridge and see if the arp requests from jail 1 are received there?
>
> i.e., i would like to know if the packets are seen correctly on the
> epair interface but are being dropped by the bridge somehow.
>
> (please show the actual tcpdump output; what i expect is that the epair
> interface shows ARP packets with a .1q tag for VLAN 60.)
>
> > Thanks Gents!
>
> ahem

Sorry.  Bad habit.  Forgive me.

Absolutely nothing is being received on the bridge nor on the A side
of the epair:

From hosts' perspective:
-----------------------------------------------------------
root@host:~ # tcpdump -ni epair0a
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on epair0a, link-type EN10MB (Ethernet), snapshot length 262144 bytes
^C
root@host:~ # tcpdump -ni bridge0
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on epair0a, link-type EN10MB (Ethernet), snapshot length 262144 bytes
^C


From Jail 1's perspective:
-----------------------------------------------------------
root@Jail1:/ # tcpdump -ni epair0b.60
tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
listening on epair0b.60, link-type EN10MB (Ethernet), snapshot length
262144 bytes
07:52:03.722196 ARP, Request who-has 192.168.60.2 tell 192.168.60.1, length 28
07:52:04.785635 ARP, Request who-has 192.168.60.2 tell 192.168.60.1, length 28
^C

So jail 1 is trying, the host just isn't having any of it.

Thanks Again Lexi,
Paul Procacci

-- 
__________________

:(){ :|:& };:
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.