https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=290773
--- Comment #4 from [email protected] ---
Created attachment 265143
--> https://bugs.freebsd.org/bugzilla/attachment.cgi?id=265143&action=edit
vtnet0 pcap during SCP test
Hello
Please find bellow the requested information
* For reproducing the issue you copy a file from the VM to some other host?
For the test you can copy a file from the VM to your PC.
* Is the other host another VM running in parallel to the FreeBSD VM?
Yes but their is plenty of resources available on the host.
* Is the other host a physical host?
Physical this one does not matter, I have the issue with a VM on the same host
or using my PC as a client.
* Are you running any sort of NAT/Firewall on the FreeBSD VM?
Not in the FreeBSD VM and not on the path between the FreeBSD VM and the
"client"
* Could you provide the output of ifconfig vtnet0?
# ifconfig vtnet0
vtnet0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
options=ec07b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS>
ether 92:93:c8:6e:95:77
inet 12.0.251.19 netmask 0xffff0000 broadcast 12.0.255.255
inet6 fe80::9093:c8ff:fe6e:9577%vtnet0 prefixlen 64 scopeid 0x2
media: Ethernet autoselect (10Gbase-T <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
* Could you provide the output of sysctl hw.vtnet
# sysctl hw.vtnet
hw.vtnet.lro_mbufq_depth: 0
hw.vtnet.lro_entry_count: 128
hw.vtnet.rx_process_limit: 1024
hw.vtnet.tso_maxlen: 65535
hw.vtnet.mq_max_pairs: 32
hw.vtnet.mq_disable: 0
hw.vtnet.lro_disable: 1
hw.vtnet.tso_disable: 0
hw.vtnet.fixup_needs_csum: 0
hw.vtnet.csum_disable: 0
* Could you provide the output of sysctl dev.vtnet.0
dev.vtnet.0.txq0.rescheduled: 0
dev.vtnet.0.txq0.tso: 0
dev.vtnet.0.txq0.csum: 0
dev.vtnet.0.txq0.omcasts: 2
dev.vtnet.0.txq0.obytes: 258
dev.vtnet.0.txq0.opackets: 3
dev.vtnet.0.rxq0.rescheduled: 0
dev.vtnet.0.rxq0.host_lro: 0
dev.vtnet.0.rxq0.csum_failed: 0
dev.vtnet.0.rxq0.csum: 0
dev.vtnet.0.rxq0.ierrors: 0
dev.vtnet.0.rxq0.iqdrops: 0
dev.vtnet.0.rxq0.ibytes: 82768
dev.vtnet.0.rxq0.ipackets: 948
dev.vtnet.0.tx_task_rescheduled: 0
dev.vtnet.0.tx_tso_offloaded: 0
dev.vtnet.0.tx_csum_offloaded: 0
dev.vtnet.0.tx_defrag_failed: 0
dev.vtnet.0.tx_defragged: 0
dev.vtnet.0.tx_tso_without_csum: 0
dev.vtnet.0.tx_tso_not_tcp: 0
dev.vtnet.0.tx_csum_proto_mismatch: 0
dev.vtnet.0.tx_csum_unknown_ethtype: 0
dev.vtnet.0.rx_task_rescheduled: 0
dev.vtnet.0.rx_csum_offloaded: 0
dev.vtnet.0.rx_csum_failed: 0
dev.vtnet.0.rx_csum_inaccessible_ipproto: 0
dev.vtnet.0.rx_csum_bad_offset: 0
dev.vtnet.0.rx_csum_bad_ipproto: 0
dev.vtnet.0.rx_csum_bad_ethtype: 0
dev.vtnet.0.rx_mergeable_failed: 0
dev.vtnet.0.rx_enq_replacement_failed: 0
dev.vtnet.0.rx_frame_too_large: 0
dev.vtnet.0.mbuf_alloc_failed: 0
dev.vtnet.0.act_vq_pairs: 1
dev.vtnet.0.req_vq_pairs: 1
dev.vtnet.0.max_vq_pairs: 1
dev.vtnet.0.%iommu:
dev.vtnet.0.%parent: virtio_pci2
dev.vtnet.0.%pnpinfo: vendor=0x00001af4 device=0x1000 subvendor=0x1af4
device_type=0x00000001
dev.vtnet.0.%location:
dev.vtnet.0.%driver: vtnet
dev.vtnet.0.%desc: VirtIO Networking Adapter
* Details of the step to generate the pcap :
- I have create a 1G file "truncate -s 1G /tmp/1G.data"
- start the pcap filtering on the IP of the vtnet0
- From my other "scp [email protected]:/tmp/1G.data /dev/null"
- Few seconds later I stopped the scp and the pcap.
In wireshark I can see "[Reassembly error, protocol TCP: New fragment overlaps
old data (retransmission?)]"
And the "dev.vtnet.0.tx_tso_without_csum" is increasing during the test.
--
You are receiving this mail because:
You are on the CC list for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.