https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=292759
--- Comment #4 from [email protected] ---
(In reply to Zhenlei Huang from comment #3)
Yes, igb0 itself + vlan works as expected:
# ifconfig igb1 vlanhwfilter up
# ifconfig igb1.20 create 192.168.20.88/24 up
# ping -c1 192.168.20.88
PING 192.168.20.88 (192.168.20.88): 56 data bytes
64 bytes from 192.168.20.88: icmp_seq=0 ttl=64 time=0.296 ms
--- 192.168.20.88 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.296/0.296/0.296/0.000 ms
#
# ifconfig -v igb1
igb1: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
options=4e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
ether 00:e0:67:1f:29:91
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
drivername: igb1
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.