[Bug 282805] Support for Aquantia AQC113 and AQC113C Ethernet Controllers

[email protected]
Newsgroups gmane.os.freebsd.devel.net
Message-ID <[email protected]/bugzilla/>
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=282805

--- Comment #36 from David Burgess <[email protected]> ---
Simlar results with RSS disabled. MTU = 9198 for the results in this and
previous post. CPU usage also looks the same with or without RSS and
tx_abdicate. Idle % is slightly higher when receiving, and appears to correlate
with throughput in all cases, as you would expect.

tx_abdicate=1

root@bgfw:~ # iperf3 -c 192.168.4.5
Connecting to host 192.168.4.5, port 5201
[  5] local 192.168.4.1 port 59639 connected to 192.168.4.5 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   827 MBytes  6.92 Gbits/sec  117    230 KBytes       
[  5]   1.00-2.01   sec   889 MBytes  7.40 Gbits/sec   94    554 KBytes       
[  5]   2.01-3.00   sec   892 MBytes  7.55 Gbits/sec  135    781 KBytes       
[  5]   3.00-4.00   sec   792 MBytes  6.65 Gbits/sec  138    329 KBytes       
[  5]   4.00-5.00   sec   795 MBytes  6.67 Gbits/sec  146    604 KBytes       
[  5]   5.00-6.00   sec   866 MBytes  7.26 Gbits/sec  144    144 KBytes       
[  5]   6.00-7.02   sec   802 MBytes  6.60 Gbits/sec  152    711 KBytes       
[  5]   7.02-8.00   sec   904 MBytes  7.72 Gbits/sec  133    408 KBytes       
[  5]   8.00-9.00   sec   866 MBytes  7.27 Gbits/sec  108    390 KBytes       
[  5]   9.00-10.00  sec   811 MBytes  6.80 Gbits/sec  101    437 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  8.25 GBytes  7.08 Gbits/sec  1268            sender
[  5]   0.00-10.00  sec  8.24 GBytes  7.08 Gbits/sec                  receiver

iperf Done.

root@bgfw:~ # iperf3 -c 192.168.4.5 -R
Connecting to host 192.168.4.5, port 5201
Reverse mode, remote host 192.168.4.5 is sending
[  5] local 192.168.4.1 port 64749 connected to 192.168.4.5 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.15 GBytes  9.88 Gbits/sec                  
[  5]   1.00-2.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   2.00-3.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   3.00-4.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   4.00-5.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   5.00-6.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   6.00-7.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   7.00-8.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   8.00-9.00   sec  1.15 GBytes  9.90 Gbits/sec                  
[  5]   9.00-10.00  sec  1.15 GBytes  9.90 Gbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  11.5 GBytes  9.90 Gbits/sec    2            sender
[  5]   0.00-10.00  sec  11.5 GBytes  9.90 Gbits/sec                  receiver

iperf Done.

tx_abdicate=0

root@bgfw:~ # iperf3 -c 192.168.4.5
Connecting to host 192.168.4.5, port 5201
[  5] local 192.168.4.1 port 38232 connected to 192.168.4.5 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec  1022 MBytes  8.57 Gbits/sec  132    196 KBytes       
[  5]   1.00-2.00   sec   993 MBytes  8.32 Gbits/sec  161    331 KBytes       
[  5]   2.00-3.02   sec  1.01 GBytes  8.52 Gbits/sec  167    239 KBytes       
[  5]   3.02-4.00   sec   972 MBytes  8.35 Gbits/sec  167    521 KBytes       
[  5]   4.00-5.02   sec   918 MBytes  7.56 Gbits/sec  156   53.6 KBytes       
[  5]   5.02-6.00   sec   974 MBytes  8.32 Gbits/sec  176    274 KBytes       
[  5]   6.00-7.02   sec  1004 MBytes  8.27 Gbits/sec  169    350 KBytes       
[  5]   7.02-8.03   sec  1.02 GBytes  8.68 Gbits/sec  165    814 KBytes       
[  5]   8.03-9.00   sec  1009 MBytes  8.67 Gbits/sec  118   1.00 MBytes       
[  5]   9.00-10.00  sec  1.01 GBytes  8.67 Gbits/sec  128    346 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  9.77 GBytes  8.39 Gbits/sec  1539            sender
[  5]   0.00-10.00  sec  9.77 GBytes  8.39 Gbits/sec                  receiver

iperf Done.

root@bgfw:~ # iperf3 -c 192.168.4.5 -R
Connecting to host 192.168.4.5, port 5201
Reverse mode, remote host 192.168.4.5 is sending
[  5] local 192.168.4.1 port 36016 connected to 192.168.4.5 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.06 GBytes  9.07 Gbits/sec                  
[  5]   1.00-2.02   sec  1.11 GBytes  9.32 Gbits/sec                  
[  5]   2.02-3.00   sec  1.06 GBytes  9.32 Gbits/sec                  
[  5]   3.00-4.00   sec  1.03 GBytes  8.87 Gbits/sec                  
[  5]   4.00-5.00   sec  1.05 GBytes  9.00 Gbits/sec                  
[  5]   5.00-6.00   sec  1.05 GBytes  8.98 Gbits/sec                  
[  5]   6.00-7.00   sec  1.06 GBytes  9.08 Gbits/sec                  
[  5]   7.00-8.00   sec  1.03 GBytes  8.88 Gbits/sec                  
[  5]   8.00-9.00   sec  1.04 GBytes  8.93 Gbits/sec                  
[  5]   9.00-10.00  sec  1.03 GBytes  8.87 Gbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec  10.5 GBytes  9.04 Gbits/sec    0            sender
[  5]   0.00-10.00  sec  10.5 GBytes  9.03 Gbits/sec                  receiver

-- 
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.