https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=292993
--- Comment #2 from Martin Lesser <[email protected]> ---
Hi,
following the steps to reproduce. Both host and jail are running
15.0-RELEASE-p4.
If you need further information please let me know. So here we go:
# netgraph related modules loaded - kldstat:
3 1 0xffffffff82157000 47f0 ng_eiface.ko
4 4 0xffffffff8215c000 16ca8 netgraph.ko
5 1 0xffffffff82173000 5b90 ng_ether.ko
6 1 0xffffffff8217a000 6620 ng_bridge.ko
# net related lines in /etc/rc.conf of host:
ifconfig_em0="inet 192.168.168.3 netmask 255.255.255.0 up"
ifconfig_em0_ipv6="inet6 2a00:6020:50d7:5300::3/64 accept_rtadv"
# ifconfig (on host):
em0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric 0
mtu 1500
options=4e524bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,HWSTATS,MEXTPG>
ether 68:05:ca:0d:6a:fd
inet 192.168.168.3 netmask 0xffffff00 broadcast 192.168.168.255
inet6 fe80::6a05:caff:fe0d:6afd%em0 prefixlen 64 scopeid 0x2
inet6 2a00:6020:50d7:5300::3 prefixlen 64
inet6 2a00:6020:50d7:5300:6a05:caff:fe0d:6afd prefixlen 64 autoconf
pltime 14400 vltime 86400
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
# /usr/local/etc/jail.conf.d/web.conf:
web {
### STARTUP / LOGGING
exec.start = "/bin/sh /etc/rc";
exec.stop = "/bin/sh /etc/rc.shutdown";
exec.consolelog = "/var/log/jail_console_${name}.log";
### PERMISSIONS
allow.raw_sockets;
allow.sysvipc;
exec.clean;
mount.devfs;
### HOSTNAME / PATH
host.hostname = "${name}";
path = "/mnt/jails/nullfs/${name}";
$rpath = "/mnt/jails/realjails/${name}";
### NETWORKS / INTERFACES
$id = "210";
$ip4 = "192.168.168.${id}/24";
$ip6 = "2a00:6020:50d7:5300::${id}:3";
$gw6 = "2a00:6020:50d7:5300::1";
$gw4 = "192.168.168.1";
$jif = "em0";
$if_uplink="${jif}";
$if_name="ng0_${name}";
vnet;
vnet.interface = "${if_name}";
exec.prestart += "jng bridge $name $if_uplink";
exec.start += "ifconfig ${if_name} ${ip4} up";
exec.start += "ifconfig ${if_name} inet6 ${ip6}";
exec.start += "route add default ${gw4}";
exec.start += "route add -inet6 default ${gw6}";
exec.poststart += "ngctl msg ${if_uplink}: setpromisc 1";
exec.poststart += "ngctl msg ${if_uplink}: setautosrc 0";
exec.poststop = "ngctl shutdown $if_name:";
mount += "${rpath} ${path} nullfs rw 0 0";
mount += "/mnt/jails/templates/base15 ${path}/base nullfs ro 0 0";
# Starting the jail, jexec into it and ifconfig:
service jail start web
jexec web
ifconfig:
ng0_web: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP> metric
0 mtu 1500
options=28<VLAN_MTU,JUMBO_MTU>
ether 02:40:b2:0d:6a:fd
hwaddr 58:9c:fc:10:a0:6e
inet 192.168.168.210 netmask 0xffffff00 broadcast 192.168.168.255
inet6 2a00:6020:50d7:5300::210:3 prefixlen 64
inet6 fe80::40:b2ff:fe0d:6afd%ng0_web prefixlen 64 scopeid 0x6
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
# Leaving jail and stopping it => panic
service jail web stop
--
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.