Re: VirtIO Net Tuning
Mark Saad <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.net |
|---|---|
| Message-ID | <CAMXt9Nb7bp4BSPrZbd=QR6WTirPKt4wNTS3nziQcxyXmRiO2_Q@mail.gmail.com> |
On Wed, Mar 25, 2026 at 10:54 AM Michael Tuexen <[email protected]> wrote: > > On 25. Mar 2026, at 15:06, Mark Saad <[email protected]> wrote: > > > > Hello All > > I have been playing with FreeBSD 14.3-RELEASE and 15.0-REELASE amd64 > qemu powered vms on a Linux cloud hosting setup. I have noticed that with > VirtIO net ( vtnet ) interfaces there is some sort of tuning required , or > there is some sort of limitation on the packets per second and overall > throughput the nics can push. I am not able to get any one interface to > push more then 6Gb/s bursts and 5.5Gb/s sustained. Before I go off the deep > end with details has anyone run into this , is this a known issue ? > Hi Mark, > > as indicated by Mike, there has been a lot of improvements to vtnet in > 14.4 and 15.0 > such that no special tuning is required. > If you find that some tuning is necessary to improve things, I would like > to know, > since this is not intended. > I am not saying that the vtnet driver can't be improved, only that the > default > settings should not need tweaking. > > Best regards > Michael > > > > -- > > mark saad | [email protected] > > Mike / Michael I just tried FreeBSD 14.4 and saw the same results . The simple test is this. Two VMS in the same network . Each VM has 14.4-RELEASE from using the IMAGE . Each VM has 8 cores 16G ram , one vtnet nic and some disk. fish 10.240.65.6 sending to bird 10.240.65.7. root@fish:~ # iperf3 -c 10.240.65.7 -p 8080 Connecting to host 10.240.65.7, port 8080 [ 5] local 10.240.65.8 port 10106 connected to 10.240.65.7 port 8080 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.06 sec 386 MBytes 3.04 Gbits/sec 0 1.20 MBytes [ 5] 1.06-2.04 sec 368 MBytes 3.17 Gbits/sec 0 2.29 MBytes [ 5] 2.04-3.05 sec 394 MBytes 3.26 Gbits/sec 0 3.44 MBytes [ 5] 3.05-4.01 sec 359 MBytes 3.14 Gbits/sec 0 3.92 MBytes [ 5] 4.01-5.04 sec 395 MBytes 3.22 Gbits/sec 0 3.92 MBytes [ 5] 5.04-6.04 sec 342 MBytes 2.86 Gbits/sec 0 3.92 MBytes [ 5] 6.04-7.06 sec 426 MBytes 3.48 Gbits/sec 0 3.92 MBytes [ 5] 7.06-8.02 sec 369 MBytes 3.25 Gbits/sec 0 3.92 MBytes [ 5] 8.02-9.04 sec 422 MBytes 3.46 Gbits/sec 0 3.92 MBytes [ 5] 9.04-10.02 sec 244 MBytes 2.08 Gbits/sec 0 3.92 MBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.02 sec 3.62 GBytes 3.10 Gbits/sec 0 sender [ 5] 0.00-10.02 sec 3.61 GBytes 3.10 Gbits/sec receiver iperf Done. root@fish:~ # Running 15.0-RELEASE was not much of a difference. -- mark saad | [email protected]