Re: rge(4) RTL8126 simple testing

sounds like maybe ASPM isn't setup completely correctly on RC/EP?


-a

On Wed, 25 Mar 2026 at 13:37, Sean C. Farley <[email protected]> wrote:
>
> On Tue, 24 Mar 2026, Sean C. Farley wrote:
>
> > On Fri, 6 Mar 2026, Adrian Chadd wrote:
> >
> >> me and when i poke the foundation about it :)
> >
> > Another point of interest with these NICs.  The one that is connected
> > to the Nokia ONT XS-010X-Q stops functioning at random times, usually
> > days apart.  The interface shows it as up and the ONT looks like it is
> > happy and even blinks showing data is flowing (in at least one
> > direction), but the only packets I see on the NIC are ARP requests for
> > the upstream router.
> >
> > The other two NICs have not shown this issue.
> >
> > The resolution is to either bring the NIC down then up or merely
> > changing the options on the NIC.  This makes me suspect it is the NIC
> > at fault but unsure if it is the driver or this particular NIC.  I
> > guess I can swap the NICs around to see if the problem resolves itself
> > or follows the NIC.
> >
> > One other thing to point out is that this ONT is new, so it could
> > still be the faulty bit.
>
> I have not tested this very long, but there is a possibility that hangs
> were caused by an issue with the bus the one NIC was on.  The comment I
> just added to the issue to update the port
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=294029:
>
>      If anyone becomes curious about the "ClockPM disabled" symptom I
>      had, it was due to something going wrong with the PCIe bus
>      associated with the CPU.  Removing other cards from slots associated
>      with the CPU did not help.  Moving the NIC to a PCH-associated slot
>      did.  This should stop the hangs.  It already removed all retries
>      seen using iperf against a public server.
>
>      I discovered it after bouncing things off of AI and discovering
>      about the "-e" option to pciconf.  "Hmm.  What shows when I provide
>      this -e option, to report errors, from the manpage?  Oh!"
>
>      ...
>      ecap 0001[100] = AER 2 0 fatal 0 non-fatal 2 corrected
>      ecap 0002[148] = VC 1 max VC0
>      ecap 0003[170] = Serial 1 01000000684ce000
>      ecap 0019[180] = PCIe Sec 1 lane errors 0
>      ecap 0017[190] = TPH Requester 1
>      ecap 0018[21c] = LTR 1
>      ecap 001e[224] = L1 PM Substates 1
>      ecap 000b[234] = Vendor [1] ID 0002 Rev 4 Length 256
>        PCI-e errors = Correctable Error Detected
>                       Unsupported Request Detected
>           Corrected = Replay Timer Timeout
>                       Advisory Non-Fatal Error
>
> Sean
> --
> [email protected]
>
>
> >> On Thu, 5 Mar 2026 at 09:05, Sean C. Farley <[email protected]> wrote:
> >>>
> >>> On Wed, 4 Mar 2026, Adrian Chadd wrote:
> >>>
> >>>> That's all good to know; if the vendor driver / linux driver can't
> >>>> negotiate 2.5g then we can try poking realtek directly for help.
> >>>> They're more likely to help if reproducible in these drivers.
> >>>>
> >>>> -a
> >>>
> >>> Just to make sure this is not lost:  Who does the poking and prodding?
> >>> While I can do it, I have no idea where.  :)
> >>>
> >>> Sean
> >>> --
> >>> [email protected]
> >>>
> >>>
> >>>> On Wed, 4 Mar 2026 at 13:02, Sean C. Farley <[email protected]> wrote:
> >>>>>
> >>>>> On Sat, 28 Feb 2026, Sean C. Farley wrote:
> >>>>>
> >>>>>> I recently upgraded my home network using a few BrosTrend 5Gb cards
> >>>>>> (RTL8126) with 14-STABLE (1eb2beb3686c) and the latest commit
> >>>>>> (3170b35) to the GitHub repo for if_rge.  It was either these cards or
> >>>>>> a couple of Intel X550-T2 cards, but less power and less heat were the
> >>>>>> deciding factors.
> >>>>>>
> >>>>>> For the most part, they seem to work very well, except that they
> >>>>>> cannot negotiate a 2500Base-T connection.  They can negotiate
> >>>>>> 1000baseT and 5000Base-T.  This was with two different cards
> >>>>>> connecting to two different devices.  If manually set, they will try
> >>>>>> for awhile than fall-back to 1000baseT.
> >>>>>>
> >>>>>> One other oddity is that rge0 has "ClockPM disabled", but I have not
> >>>>>> looked into that.
> >>>>>>
> >>>>>> The networking hardware:
> >>>>>> - 3 BrosTrend 5Gb NIC's[1]  (5Gb)
> >>>>>> - Zyxel NWA130BE[2]  (2.5Gb port)
> >>>>>> - TRENDnet TEG-S591[3]  (connected the NIC to its 10Gb port)
> >>>>>> - Nokia ONT XS-010X-Q[4]  (10Gb port)
> >
> > *snip*
> >
> >>>>>>  1. https://www.brostrend.com/products/p2
> >>>>>>  2.
> >>>>>> https://www.zyxel.com/us/en-us/products/wireless/be11000-6-stream-wifi-7-triple-radio-nebulaflex-access-point-nwa130be
> >>>>>>  3.
> >>>>>> https://www.trendnet.com/products/2_5g-10g-switches/9-port-multi-gig-switch-TEG-S591-v1
> >>>>>>  4. https://www.nokia.com/asset/210704/