Re: QEMU

On 07/10/18 14:39, Jason Bacon wrote:
> On 07/09/18 16:00, Nathan Whitehorn wrote:
>>
>>
>> On 07/09/18 13:39, Jason Bacon wrote:
>>> On 07/09/18 14:17, John Baldwin wrote:
>>>> On 7/9/18 11:55 AM, Jason Bacon wrote:
>>>>> Anyone running on qemu lately?
>>>>>
>>>>> I've tried following the "recipe": 
>>>>> https://wiki.freebsd.org/QemuRecipes
>>>>> and tried using aqemu.
>>>>>
>>>>> 11.2-RELEASE hangs during boot from the ISO.
>>>>>
>>>>> 11.1 makes it to the install screen, but does not accept keyboard 
>>>>> input.
>>>>>
>>>>> Hoping to fix ppc issues in some of the ports I maintain and I don't
>>>>> have any ppc hardware at the moment.
>>>> It's been a while since I tried those (I put the recipes up), and IIRC
>>>> I was only ever able to boot powerpc64 under qemu, never 32-bit.
>>>>
>>> Just noticed that the keyboard works during initial boot (I can hit 
>>> enter to cancel the countdown after loading the kernel), but
>>> after successfully starting services and launching the installer, 
>>> there is no response.
>>>
>>> "Scanning USB" shows a USB keyboard and mouse and "no console 
>>> specified using screen & keyboard".
>>>
>>> Adding -usb and/or -device usb-kbd don't seem to help.
>>>
>>> How about PearPC?
>>>
>>
>> Maybe a USB problem? If you run with -nographic with 
>> qemu-system-ppc64, it will work reliably. Other modes are less 
>> well-tested.
>> -Nathan
>
> With -nographic, it hangs before loading the kernel:
>
> + qemu-system-ppc64 -nographic -cdrom 
> Save/FreeBSD-11.2-RELEASE-powerpc-disc1.iso -drive 
> 'file=freebsd-ppc.img,format=raw' -boot d
>
>
> SLOF 
> **********************************************************************
> QEMU Starting
>  Build Date = Mar  3 2017 13:29:19
>  FW Version = git-66d250ef0fd06bb8
>  Press "s" to enter Open Firmware.
>
> Populating /vdevice methods
> Populating /vdevice/vty@71000000
> Populating /vdevice/nvram@71000001
> Populating /vdevice/l-lan@71000002
> Populating /vdevice/v-scsi@71000003
>        SCSI: Looking for devices
>           8000000000000000 DISK     : "QEMU     QEMU HARDDISK 2.5+"
>           8200000000000000 CD-ROM   : "QEMU     QEMU CD-ROM 2.5+"
> Populating /pci@800000020000000
>                      00 0000 (D) : 1234 1111    qemu vga
>                      00 0800 (D) : 1033 0194    serial bus [ usb-xhci ]
> No NVRAM common partition, re-initializing...
> Installing QEMU fb
>
>
>
> Scanning USB
>   XHCI: Initializing
>     USB Keyboard
>     USB mouse
> No console specified using screen & keyboard
>
>
>
>   Welcome to Open Firmware
>
>   Copyright (c) 2004, 2011 IBM Corporation All rights reserved.
>   This program and the accompanying materials are made available
>   under the terms of the BSD License available at
>   http://www.opensource.org/licenses/bsd-license.php
>
>
> Trying to load:  from: /vdevice/v-scsi@71000003/disk@8200000000000000 
> ...   Successfully loaded
> Trying to write privileged spr 25 (0x019) at 00000000008b03c4
>
>
> The disk image was created with
>
> qemu-img create -f raw $diskimage 20g
>
Back to the graphic run with 11.1...

If I let it sit a while, I see the following I/O warning which might 
explain the lack of keyboard response:

+ qemu-system-ppc64 -cdrom 
Save/FreeBSD-11.1-RELEASE-powerpc-powerpc64-disc1.iso -drive 
'file=freebsd-ppc.img,format=raw' -boot d
Fontconfig warning: "/usr/local/etc/fonts/local.conf", line 1093: saw 
number, expected matrix
main-loop: WARNING: I/O thread spun for 1000 iterations

qemu at this point is using very little cpu:

   PID USERNAME    THR PRI NICE   SIZE    RES STATE   C   TIME WCPU COMMAND
93292 bacon         5  24    0   458M 54864K select  1  18:27 5.88% 
lumina-deskt
19406 bacon         4  20    0  1185M   259M select  0   6:25 3.15% 
qemu-system-

-- 
Earth is a beta site.

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "[email protected]"