Console color output on G5/Black Bird

Dear all,

the color output on the console an G5 or Black Bird machines seems to be wrong.

When running a shell script with

printf "\033[30m%15s\033[0m\n" "BLACK   #000000"
printf "\033[31m%15s\033[0m\n" "RED     #FF0000"
printf "\033[32m%15s\033[0m\n" "GREEN   #00FF00"
printf "\033[33m%15s\033[0m\n" "YELLOW  #FFFF00"
printf "\033[34m%15s\033[0m\n" "BLUE    #0000FF"
printf "\033[35m%15s\033[0m\n" "MEGENTA #FF00FF"
printf "\033[36m%15s\033[0m\n" "CYAN    #00FFFF"
printf "\033[37m%15s\033[0m\n" "WHITE   #FFFFFF"

on the G5 it seems that the red byte and the blue byte are swapped. So RED is written in blue,
for example. A similar but different issue is on the console on the Black Bird.

Any idea where the problem (I guess it is a byte ordering one) could be located?
In head/sys/dev/vt/hw/ofwfb/ofwfb.c for the G5? A different place for the Black bird?

Best regards
Michael
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "[email protected]"