X5000 dtb file

Hello,

It not booting this time I believe the error is with the dtb file.

Here is the error:
## Starting application at 0x00010160 ...
Consoles: U-Boot console
Compatible U-Boot API signature found @0x7fe2efd8

FreeBSD/powerpc64 U-Boot loader, Revision 1.1

Number of U-Boot devices: 4
U-Boot env: loaderdev='disk1s2a'
Found U-Boot device: disk
   Checking unit=1 slice=2 partition=0... good.
Booting from disk1s2a:
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xb5a998+0x4199c6 syms=[0x8+0xb9bc8+0x8+0xc0c11]

scanning bus 0 for devices... ERROR: Invalid USB EP length (9)
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by U-Boot at address 0xc00000.
Kernel args: (null)devices... 4 USB Device(s) found
Bad trap at PC: 4102000, SR: 1200, vector=800
NIP: 04102000 XER: 20000000 LR: 000102D0 REGS: 7fe2d9b0 TRAP: 0800 DAR: 
00000000
MSR: 00001200 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
Found 0 device(s).
GPR00: 000102C4 7FE2DAA0 7FE2DF00 03205000 00000000 000055AD 00000000 
000F0000
GPR08: 00000800 00000002 80000000 7FE2D950 24444C22 B2008A10 0005B224 
00000000
GPR16: 0005B014 00000002 00000000 0005C744 000594A8 000000A8 00000000 
00059683
GPR24: 0005600E 00000000 000000A9 000000A8 00000000 04102000 0008C380 
00000000
Call backtrace:
000102C4 00010570 00010384 00012830 000212F0 7FF45B64 00000000
7FE8C2B0 tload sata 0:1 $fdtaddr cyrus.dtb
Exception in kernel pc 4102000 signal 0
### ERROR ### Please RESET the board ###

Do you have a newer version of the dtb file, or is this something that I 
can create?

Also, my developer believes the problem with it not seeing PCIe cards is 
because of the dtb.

Kind Regards,
Al