audio/rhythmbox

The 'port test' command (ports-mgmt/porttools) tests a port for a number =
of possible errors
by running portlint, building, packaging, installing, and de-installing w=
ith a check for
left files. This is done with defined PREFIX and PKG_DBDIR variables. 'po=
rt test' command
is recommended by the Porter's Handbook.

Note that the port installs the usual way.

When running 'port test' command in audio/rhythmbox, the following output=
 is generated
indicating fatal errors from portlint.


audio/rhythmbox
+++++++++++++++

=3D=3D=3D> Validating port with portlint
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [592]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [593]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [594]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [595]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [596]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [597]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [598]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [599]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [600]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [601]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [602]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [603]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [604]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [605]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [606]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [607]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [608]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [609]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [610]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [611]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [612]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [613]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [614]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [615]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [616]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [617]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [618]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [619]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [620]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [621]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [622]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [623]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [626]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [627]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [628]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [629]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [630]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [631]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [632]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [633]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [634]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [635]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [636]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [637]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [638]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [639]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [640]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [641]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [642]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [643]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [644]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [645]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [646]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [647]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [648]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [649]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [650]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [651]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [652]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [653]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [654]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [655]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [656]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [657]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [658]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
WARN: /usr/ports/audio/rhythmbox/pkg-plist: [659]: If and only if your po=
rt is DATADIR-safe (that is, a user can override DATADIR when building th=
is port and the port will still work correctly) consider using DATADIR ma=
cro; if you are unsure if this port is DATADIR-safe, then ignore this war=
ning
FATAL: Makefile: [109]: USE_PYTHON is set after including bsd.port.pre.mk=
.
WARN: Makefile: use ".if !defined(NOPORTDOCS)" to wrap installation of fi=
les into /usr/local/share/doc.
WARN: Makefile: Consider adding support for a WITHOUT_NLS knob to conditi=
onally disable gettext support.
WARN: Makefile: [111]: possible direct use of command "python" found. use=
 ${PYTHON_CMD} instead.
1 fatal error and 69 warnings found.
Error validating port
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-qa
To unsubscribe, send any mail to "[email protected]"