Repeated SES enclosure status reporting/logging?

John <[email protected]>
Newsgroups gmane.os.freebsd.devel.scsi
Message-ID <[email protected]>
Hi Folks,

   I have an old Compellent SC8000 system with 12.2-STABLE installed
with some 12Gb/s shelves on LSI 9305 cards and it seems to work quite
nicely. The question I have that I cannot seem to figure out is the
continuous logging of SES shelf drive status approximately every 5 seconds:

ses1: da0,pass1,da120,pass126 in 'Drive Slot 0', SAS Slot: 2 phys at slot 0
ses1:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1:  phy 0: parent 520474729978447f addr 500003976c8a71d2
ses1:  phy 1: SAS device type 1 phy 1 Target ( SSP )
ses1:  phy 1: parent 52047472997844ff addr 500003976c8a71d3
ses1: da1,pass2,da121,pass127 in 'Drive Slot 1', SAS Slot: 2 phys at slot 1
ses1:  phy 0: SAS device type 1 phy 0 Target ( SSP )
ses1:  phy 0: parent 520474729978447f addr 500003976c8a7086
ses1:  phy 1: SAS device type 1 phy 1 Target ( SSP )
ses1:  phy 1: parent 52047472997844ff addr 500003976c8a7087

...

   Basically spamming the console and log files.

   I'm thinking this is coming from:

   enc_status_updater()
      enc->enc_vec.poll_status(enc);

   driven via:

   callout_reset(&enc->status_updater, 60*hz, enc_status_updater, enc);

   but I'm not sure I'm following the code correctly and haven't yet
seen where the output is coming from. enc_verbose is 0.

Thanks,
John

FreeBSD testsys.example.com 12.2-STABLE FreeBSD 12.2-STABLE #0 r369545: Sun Apr  4 15:41:49 EDT 2021

kern.cam.enc.verbose: 0

ses1 at mpr0 bus 0 scbus7 target 48 lun 0
ses1: <DELL SC420 1.09> Fixed Enclosure Services SPC-4 SCSI device
ses1: 1200.000MB/s transfers
ses1: Command Queueing enabled
ses1: SES Device

 4 shelves A & B sides -> 8 enclosure daemons (daemon0 is MB based).

root    35   0.0  0.0      0    16  -  DL   23:27     0:00.03 [enc_daemon0]
root    36   0.0  0.0      0    16  -  DL   23:27    11:51.20 [enc_daemon1]
root    37   0.9  0.0      0    16  -  DL   23:27    12:24.37 [enc_daemon2]
root    38  12.4  0.0      0    16  -  DL   23:27    12:39.70 [enc_daemon3]
root    39   3.5  0.0      0    16  -  DL   23:27    11:30.49 [enc_daemon4]
root    40  13.2  0.0      0    16  -  DL   23:27    12:42.62 [enc_daemon5]
root    41   0.8  0.0      0    16  -  DL   23:27    13:22.25 [enc_daemon6]
root    42   0.0  0.0      0    16  -  DL   23:27    11:49.98 [enc_daemon7]
root    43   2.9  0.0      0    16  -  DL   23:27    12:25.07 [enc_daemon8]





_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.