HP 440ar stuck at waiting for root mount: CAM

Edward Scroop <[email protected]>
Newsgroups gmane.os.freebsd.devel.scsi
Message-ID <CAP+abxGS3-LHB+88L_hUGE9KATVGmf5Vxrec+C7mApc_Z1DTaA@mail.gmail.com> 
 I am currently running opnsense on hp dl360 g9 with hp 440ar. I have the
latest bios and firmwares installed.

I am currently running opnsense 26.1 which is 14.3 and i am trying to
upgrade to 26.7 with 15.1 but when it reboots it gets stuck at boot with a
repeating message of "Root mount waiting for: CAM".
I can rollback to the old zfs snapshot and it will boot normally.

I have attached the faulty 26.7 boot logs and the normal 26.1.11 boot logs.
26.7.1.txt (text/plain, 29.3 KB) 
Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/amd64 EFI loader, Revision 3.0

   Command line arguments: loader.efi ?Y??RY?
   Image base: 0x77458000
   EFI version: 2.40
   EFI Firmware: HP (rev 3.10240)
   Console: efi (0x20001000)
   Load Path: \EFI\BOOT\BOOTX64.EFI
   Load Device: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,70CF9AEA-1F71-11F1-9E7B-00110A683118,0x28,0x82000)
   BootCurrent: 0009
   BootOrder: 0002 0000 0001 0003 0004 0005 0006 0007 0009[*] 000a 0008
   BootInfo Path: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)
Ignoring Boot0009: Only one DP found
Trying ESP: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,70CF9AEA-1F71-11F1-9E7B-00110A683118,0x28,0x82000)
Setting currdev to disk0p1:
Trying: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,70D8A6B1-1F71-11F1-9E7B-00110A683118,0x82028,0x400)
Setting currdev to disk0p2:
Trying: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(3,GPT,70EB1C2C-1F71-11F1-9E7B-00110A683118,0x82800,0x1000000)
Setting currdev to disk0p3:
Trying: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(4,GPT,70F9B038-1F71-11F1-9E7B-00110A683118,0x1082800,0xA9CF800)
Setting currdev to zfs:zroot/ROOT/default:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
console vidconsole is unavailable
no valid consoles!
Available consoles:
    efi
    eficom
    comconsole
    nullconsole
    spinconsole
Loading /boot/loader.conf.local
?c\
|
             ______  _____  _____
            /  __  |/ ___ |/ __  |
            | |  | | |__/ | |  | |___  ___ _ __  ___  ___
            | |  | |  ___/| |  | / __|/ _ \ '_ \/ __|/ _ \
            | |__| | |    | |  | \__ \  __/ | | \__ \  __/
            |_____/|_|    |_| /__|___/\___|_| |_|___/\___|

 /-----------------------------------------\
 |                                         |          :::::::::::.
 |  1. Boot Multi user [Enter]             |          :::::::::::::.
 |  2. Boot Single user                    |      ::::              ::.
 |  3. Escape to loader prompt             |      ::::              ::::
 |  4. Reboot                              |      ::::              ::::
 |  5. Cons: Dual (Serial primary)         |      ::::              ::::
 |                                         |      ::::              ::::
 |  Options:                               |      ::::              ::::
 |  6. Kernel: default/kernel (1 of 2)     |       `::              ::::
 |  7. Boot Options                        |         `::::::::::::::
 |  8. Boot Environments                   |           `::::::::::::
 |                                         |
 |                                         |
 \-----------------------------------------/     26.1  ``Witty Woodpecker''  |
   Autoboot in 0 seconds. [Space] to pause
Loading kernel...
/boot/kernel/kernel text=0x18d968 text=0xe7b06c text=0x47b433 data=0x180+0xe80 data=0x1a84c0+0x857b40 0x8+0x1abe48+0x8+0x1d1c04-
Loading configured modules...
/boot/kernel/carp.ko size 0x11b40 at 0x277e000
/boot/kernel/if_enc.ko size 0x4be0 at 0x2790000
/boot/kernel/zfs.ko size 0x628648 at 0x2795000
/boot/kernel/pfsync.ko size 0x12340 at 0x2dbe000
loading required module 'pf'
/boot/kernel/pf.ko size 0xbd6e8 at 0x2dd1000
/boot/kernel/pflog.ko size 0x3c08 at 0x2e8f000
/boot/kernel/if_bridge.ko size 0x10a68 at 0x2e93000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x8af8 at 0x2ea4000
/etc/hostid size=0x25
/boot/kernel/if_lagg.ko size 0x15ef8 at 0x2ead000
loading required module 'if_infiniband'
/boot/kernel/if_infiniband.ko size 0x3558 at 0x2ec3000
/boot/kernel/opensolaris.ko size 0x1e2f0 at 0x2ec7000
/boot/kernel/mlx4en.ko size 0x25520 at 0x2ee6000
loading required module 'mlx4'
/boot/kernel/mlx4.ko size 0x61828 at 0x2f0c000
/boot/kernel/if_gre.ko size 0xaa78 at 0x2f6e000
/boot/entropy size=0x1000
/boot/firmware/intel-ucode.bin size=0x1050000
staging 0x62600000 (not copying) tramp 0x76dfe000 PT4 0x76df5000
Start @ 0xffffffff8038e000 ...
EFI framebuffer information:
addr, size     0x91000000, 0x300000
dimensions     1024 x 768
stride         1024
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.1-RELEASE-p1 stable/26.7-n283674-12334a596709 SMP amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1024x768
WARNING: sysctl vfs.zfs.min_auto_ashift is deprecated. Use vfs.zfs.vdev.min_auto_ashift instead.
CPU microcode: no matching update found
CPU: Intel(R) Xeon(R) CPU E5-2643 v4 @ 3.40GHz (3396.23-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406f1  Family=0x6  Model=0x4f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33302949888 (31760 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 6 7 23 8 21 12 4 2 3 9 15 5 10 19 18 11 14 20 22 16 17 13
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 16.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e
smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
ciss0: <HP Smart Array P440ar> port 0x3000-0x30ff mem 0x93600000-0x936fffff,0x93700000-0x937003ff at device 0.0 numa-domain 0 on pci3
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ix0: <Intel(R) X540-AT2> mem 0x92e00000-0x92ffffff,0x93004000-0x93007fff at device 0.0 numa-domain 0 on pci5
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 12 RX queues 12 TX queues
ix0: Using MSI-X interrupts with 13 vectors
ix0: allocated for 12 queues
ix0: allocated for 12 rx queues
ix0: Ethernet address: 00:11:0a:68:31:18
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: fw 4.3.0 nvm 4.04.0 Option ROM V1-b3299-p0 eTrack 0x80000636
ix0: Error 2 setting up SR-IOV
ix0: netmap queues/slots: TX 12/2048, RX 12/2048
ix1: <Intel(R) X540-AT2> mem 0x92c00000-0x92dfffff,0x93000000-0x93003fff at device 0.1 numa-domain 0 on pci5
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 12 RX queues 12 TX queues
ix1: Using MSI-X interrupts with 13 vectors
ix1: allocated for 12 queues
ix1: allocated for 12 rx queues
ix1: Ethernet address: 00:11:0a:68:31:19
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: fw 4.3.0 nvm 4.04.0 Option ROM V1-b3299-p0 eTrack 0x80000636
ix1: Error 2 setting up SR-IOV
ix1: netmap queues/slots: TX 12/2048, RX 12/2048
pcib6: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2020-0x203f mem 0x93400000-0x934fffff,0x93504000-0x93507fff at device 0.0 numa-domain 0 on pci7
ix2: Using 2048 TX descriptors and 2048 RX descriptors
ix2: Using 12 RX queues 12 TX queues
ix2: Using MSI-X interrupts with 13 vectors
ix2: allocated for 12 queues
ix2: allocated for 12 rx queues
ix2: Ethernet address: 14:02:ec:6f:67:90
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix2: Option ROM V1-b3299-p0 eTrack 0x800009e0
ix2: Error 2 setting up SR-IOV
ix2: netmap queues/slots: TX 12/2048, RX 12/2048
ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2000-0x201f mem 0x93300000-0x933fffff,0x93500000-0x93503fff at device 0.1 numa-domain 0 on pci7
ix3: Using 2048 TX descriptors and 2048 RX descriptors
ix3: Using 12 RX queues 12 TX queues
ix3: Using MSI-X interrupts with 13 vectors
ix3: allocated for 12 queues
ix3: allocated for 12 rx queues
ix3: Ethernet address: 14:02:ec:6f:67:91
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: Option ROM V1-b3299-p0 eTrack 0x800009e0
ix3: Error 2 setting up SR-IOV
ix3: netmap queues/slots: TX 12/2048, RX 12/2048
pcib8: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pci9: <network, ethernet> at device 0.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci2: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39fff800000-0x39fff80ffff at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <PROTO,PROTO,VEND(c1),VEND(c0),LEGACY,DEBUG>
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93801000-0x938013ff at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci14
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib15: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
pci0:2:0:0: error accessing writeable VPD data
bge0: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93190000-0x9319ffff,0x931a0000-0x931affff,0x931b0000-0x931bffff at device 0.0 numa-domain 0 on pci15
bge0: APE FW version: NCSI v1.3.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 1c:98:ec:1d:83:a8
pci0:2:0:1: error accessing writeable VPD data
bge1: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93160000-0x9316ffff,0x93170000-0x9317ffff,0x93180000-0x9318ffff at device 0.1 numa-domain 0 on pci15
bge1: APE FW version: NCSI v1.3.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 1c:98:ec:1d:83:a9
pci0:2:0:2: error accessing writeable VPD data
bge2: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93130000-0x9313ffff,0x93140000-0x9314ffff,0x93150000-0x9315ffff at device 0.2 numa-domain 0 on pci15
bge2: APE FW version: NCSI v1.3.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 1c:98:ec:1d:83:aa
pci0:2:0:3: error accessing writeable VPD data
bge3: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93100000-0x9310ffff,0x93110000-0x9311ffff,0x93120000-0x9312ffff at device 0.3 numa-domain 0 on pci15
bge3: APE FW version: NCSI v1.3.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 1c:98:ec:1d:83:ab
pcib16: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2
pci17: <ACPI PCI bus> numa-domain 0 on pcib17
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93800000-0x938003ff at device 29.0 numa-domain 0 on pci2
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
pcib18: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci18: <ACPI PCI bus> numa-domain 0 on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci18
pci19: <ACPI PCI bus> numa-domain 0 on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci18
pci20: <ACPI PCI bus> numa-domain 0 on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci18
pci21: <ACPI PCI bus> numa-domain 0 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci18
pci22: <ACPI PCI bus> numa-domain 0 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci18
pci23: <ACPI PCI bus> numa-domain 0 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci18
pci24: <ACPI PCI bus> numa-domain 0 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci18
pci25: <ACPI PCI bus> numa-domain 0 on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci18
pci26: <ACPI PCI bus> numa-domain 0 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci18
pci27: <ACPI PCI bus> numa-domain 0 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci18
pci28: <ACPI PCI bus> numa-domain 0 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci18
pci29: <ACPI PCI bus> numa-domain 0 on pcib29
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est23 attach returned 6
Timecounter "TSC-low" frequency 1698033036 Hz quality 1000
Timecounters tick every 1.000 msec
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen2.1: <HP UHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus3
uhub1 numa-domain 0 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2 numa-domain 0 on usbus2
uhub2: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub3 numa-domain 0 on usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
mlx4_core0: <mlx4_core> mem 0x93200000-0x932fffff,0x39fff000000-0x39fff7fffff at device 0.0 numa-domain 0 on pci9
<6>mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021)
mlx4_core: Initializing 0000:08:00.0
uhub0: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4 numa-domain 0 on uhub3
uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5 numa-domain 0 on uhub0
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
ugen2.2: <BMC Virtual Keyboard> at usbus2
usbhid0 numa-domain 0 on uhub2
usbhid0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2
mlx4_core0: Unable to determine PCI device chain minimum BW
hidbus0: <HID bus> numa-domain 0 on usbhid0
uhub1: 21 ports with 21 removable, self powered
uhub_attach: port 1 power on or off failed, USB_ERR_TIMEOUT
mlx4_en mlx4_core0: Activating port:1
uhub_attach: port 2 power on or off failed, USB_ERR_TIMEOUT
hkbd0: <BMC Virtual Keyboard> numa-domain 0 on hidbus0
uhub_attach: port 3 power on or off failed, USB_ERR_TIMEOUT
kbd2 at hkbd0
usbhid1 numa-domain 0 on uhub2
usbhid1: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2
hidbus1: <HID bus> numa-domain 0 on usbhid1
uhub_attach: port 4 power on or off failed, USB_ERR_TIMEOUT
mlxen0: link state changed to DOWN
mlxen0: Ethernet address: ec:0d:9a:1d:47:90
<4>mlx4_en: mlx4_core0: Port 1: Using 24 TX rings
<4>mlx4_en: mlx4_core0: Port 1: Using 16 RX rings
<4>mlx4_en: mlxen0: Using 24 TX rings
<4>mlx4_en: mlxen0: Using 16 RX rings
uhub_attach: port 5 power on or off failed, USB_ERR_TIMEOUT
<4>mlx4_en: mlxen0: Initializing port
mlx4_en mlx4_core0: Activating port:2
uhub_attach: port 6 power on or off failed, USB_ERR_TIMEOUT
uhub4: 6 ports with 6 removable, self powered
uhub_attach: port 7 power on or off failed, USB_ERR_TIMEOUT
mlxen1: link state changed to DOWN
mlxen1: Ethernet address: ec:0d:9a:1d:47:91
<4>mlx4_en: mlx4_core0: Port 2: Using 24 TX rings
<4>mlx4_en: mlx4_core0: Port 2: Using 16 RX rings
<4>mlx4_en: mlxen1: Using 24 TX rings
<4>mlx4_en: mlxen1: Using 16 RX rings
uhub_attach: port 8 power on or off failed, USB_ERR_TIMEOUT
<4>mlx4_en: mlxen1: Initializing port
uhub5: 8 ports with 8 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub6 numa-domain 0 on uhub1
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
uhub6: 2 ports with 1 removable, self powered
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
ugen2.2: <BMC Virtual Keyboard> at usbus2 (disconnected)
usbhid0: at uhub2, port 1, addr 2 (disconnected)
hkbd0: detached
hidbus0: detached
usbhid0: detached
usbhid1: at uhub2, port 1, addr 2 (disconnected)
hidbus1: detached
usbhid1: detached
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
26.1.11.txt (text/plain, 34.5 KB) 
Consoles: EFI console
    Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/amd64 EFI loader, Revision 3.0

   Command line arguments: loader.efi ?Y??RY?
   Image base: 0x77458000
   EFI version: 2.40
   EFI Firmware: HP (rev 3.10240)
   Console: efi (0x20001000)
   Load Path: \EFI\BOOT\BOOTX64.EFI
   Load Device: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,70CF9AEA-1F71-11F1-9E7B-00110A683118,0x28,0x82000)
   BootCurrent: 0009
   BootOrder: 0002 0000 0001 0003 0004 0005 0006 0007 0009[*] 000a 0008
   BootInfo Path: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)
Ignoring Boot0009: Only one DP found
Trying ESP: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(1,GPT,70CF9AEA-1F71-11F1-9E7B-00110A683118,0x28,0x82000)
Setting currdev to disk0p1:
Trying: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(2,GPT,70D8A6B1-1F71-11F1-9E7B-00110A683118,0x82028,0x400)
Setting currdev to disk0p2:
Trying: PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(3,GPT,70EB1C2C-1F71-11F1-9E7B-00110A683118,0x82800,0x100Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hintsx1,0x0)/Pci(0x0,0x0)/Scsi(0x0,0x0)/HD(4,GPT,70F9B038-1F71-11F1-9E7B-00110A683118,0x1082800,0xA
Loading /boot/loader.conf
console vidconsole is unavailable/default:
no valid consoles!
Available consoles:
    efi
    eficom
    comconsole
    nullconsole
    spinconsole
Loading /boot/loader.conf.local
?c\
|
             ______  _____  _____
            /  __  |/ ___ |/ __  |
            | |  | | |__/ | |  | |___  ___ _ __  ___  ___
            | |  | |  ___/| |  | / __|/ _ \ '_ \/ __|/ _ \
            | |__| | |    | |  | \__ \  __/ | | \__ \  __/
            |_____/|_|    |_| /__|___/\___|_| |_|___/\___|

 /-----------------------------------------\
 |                                         |          :::::::::::.
 |  1. Boot Multi user [Enter]             |          :::::::::::::.
 |  2. Boot Single user                    |      ::::              ::.
 |  3. Escape to loader prompt             |      ::::              ::::
 |  4. Reboot                              |      ::::              ::::
 |  5. Cons: Dual (Serial primary)         |      ::::              ::::
 |                                         |      ::::              ::::
 |  Options:                               |      ::::              ::::
 |  6. Kernel: default/kernel (1 of 2)     |       `::              ::::
 |  7. Boot Options                        |         `::::::::::::::
 |  8. Boot Environments                   |           `::::::::::::
 |                                         |
 |                                         |
 \-----------------------------------------/     26.1  ``Witty Woodpecker''  |
   Autoboot in 0 seconds. [Space] to pause
Loading kernel...
/boot/kernel/kernel text=0x1871e0 text=0xe39ac8 text=0x46c39b data=0x180+0xe80 data=0x1978b0+0x468750 0x8+0x1a54b8+0x8+0x1cae66-
Loading configured modules...
/boot/entropy size=0x1000
/boot/kernel/if_enc.ko size 0x4be0 at 0x2372000
/boot/kernel/zfs.ko size 0x5e93f0 at 0x2377000
/boot/kernel/if_bridge.ko size 0xed60 at 0x2961000
loading required module 'bridgestp'
/boot/kernel/bridgestp.ko size 0x8990 at 0x2970000
/boot/kernel/pflog.ko size 0x3c10 at 0x2979000
loading required module 'pf'
/boot/kernel/pf.ko size 0x91170 at 0x297d000
/boot/kernel/opensolaris.ko size 0x1e280 at 0x2a0f000
/boot/kernel/if_gre.ko size 0xaa30 at 0x2a2e000
/boot/firmware/intel-ucode.bin size=0x1050000
/etc/hostid size=0x25
/boot/kernel/pfsync.ko size 0x11b28 at 0x3a89000
/boot/kernel/mlx4en.ko size 0x24ff0 at 0x3a9b000
loading required module 'mlx4'
/boot/kernel/mlx4.ko size 0x609f8 at 0x3ac0000
/boot/kernel/if_lagg.ko size 0x16650 at 0x3b21000
loading required module 'if_infiniband'
/boot/kernel/if_infiniband.ko size 0x3558 at 0x3b38000
/boot/kernel/carp.ko size 0xfbc0 at 0x3b3c000
staging 0x62a00000 (not copying) tramp 0x76dfe000 PT4 0x76df5000
Start @ 0xffffffff80388000 ...
EFI framebuffer information:
addr, size     0x91000000, 0x300000
dimensions     1024 x 768
stride         1024
masks          0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE-p16 stable/26.1-n272152-9b6eef552f24 SMP amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1024x768
CPU microcode: no matching update found
CPU: Intel(R) Xeon(R) CPU E5-2643 v4 @ 3.40GHz (3396.12-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x406f1  Family=0x6  Model=0x4f  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
  Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33170477056 (31633 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP     ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 24-47
ioapic2 <Version 2.0> irqs 48-71
Launching APs: 1 3 8 17 2 19 16 12 18 5 4 22 13 10 14 15 7 9 21 11 6 23 20
random: entropy device external interface
wlan: mac acl policy registered
kbd1 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 15.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x788db000-0x788db01e
smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <HP ProLiant>
acpi0: Power Button (fixed)
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci2
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
ciss0: <HP Smart Array P440ar> port 0x3000-0x30ff mem 0x93600000-0x936fffff,0x93700000-0x937003ff at device 0.0 numa-domain 0 on pci3
ciss0: PERFORMANT Transport
pcib4: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci2
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci2
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
ix0: <Intel(R) X540-AT2> mem 0x92e00000-0x92ffffff,0x93004000-0x93007fff at device 0.0 numa-domain 0 on pci5
ix0: Using 2048 TX descriptors and 2048 RX descriptors
ix0: Using 12 RX queues 12 TX queues
ix0: Using MSI-X interrupts with 13 vectors
ix0: allocated for 12 queues
ix0: allocated for 12 rx queues
ix0: Ethernet address: 00:11:0a:68:31:18
ix0: PCI Express Bus: Speed 5.0GT/s Width x8
ix0: fw 4.3.0 nvm 4.04.0 Option ROM V1-b3299-p0 eTrack 0x80000636
ix0: Error 2 setting up SR-IOV
ix0: netmap queues/slots: TX 12/2048, RX 12/2048
ix1: <Intel(R) X540-AT2> mem 0x92c00000-0x92dfffff,0x93000000-0x93003fff at device 0.1 numa-domain 0 on pci5
ix1: Using 2048 TX descriptors and 2048 RX descriptors
ix1: Using 12 RX queues 12 TX queues
ix1: Using MSI-X interrupts with 13 vectors
ix1: allocated for 12 queues
ix1: allocated for 12 rx queues
ix1: Ethernet address: 00:11:0a:68:31:19
ix1: PCI Express Bus: Speed 5.0GT/s Width x8
ix1: fw 4.3.0 nvm 4.04.0 Option ROM V1-b3299-p0 eTrack 0x80000636
ix1: Error 2 setting up SR-IOV
ix1: netmap queues/slots: TX 12/2048, RX 12/2048
pcib6: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci2
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci2
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
ix2: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2020-0x203f mem 0x93400000-0x934fffff,0x93504000-0x93507fff at device 0.0 numa-domain 0 on pci7
ix2: Using 2048 TX descriptors and 2048 RX descriptors
ix2: Using 12 RX queues 12 TX queues
ix2: Using MSI-X interrupts with 13 vectors
ix2: allocated for 12 queues
ix2: allocated for 12 rx queues
ix2: Ethernet address: 14:02:ec:6f:67:90
ix2: PCI Express Bus: Speed 5.0GT/s Width x8
ix2: Option ROM V1-b3299-p0 eTrack 0x800009e0
ix2: Error 2 setting up SR-IOV
ix2: netmap queues/slots: TX 12/2048, RX 12/2048
ix3: <Intel(R) X520 82599ES (SFI/SFP+)> port 0x2000-0x201f mem 0x93300000-0x933fffff,0x93500000-0x93503fff at device 0.1 numa-domain 0 on pci7
ix3: Using 2048 TX descriptors and 2048 RX descriptors
ix3: Using 12 RX queues 12 TX queues
ix3: Using MSI-X interrupts with 13 vectors
ix3: allocated for 12 queues
ix3: allocated for 12 rx queues
ix3: Ethernet address: 14:02:ec:6f:67:91
ix3: PCI Express Bus: Speed 5.0GT/s Width x8
ix3: Option ROM V1-b3299-p0 eTrack 0x800009e0
ix3: Error 2 setting up SR-IOV
ix3: netmap queues/slots: TX 12/2048, RX 12/2048
pcib8: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci2
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci2
pci9: <ACPI PCI bus> numa-domain 0 on pcib9
pci9: <network, ethernet> at device 0.0 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci2
pci10: <ACPI PCI bus> numa-domain 0 on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci2
pci11: <ACPI PCI bus> numa-domain 0 on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci2
pci12: <ACPI PCI bus> numa-domain 0 on pcib12
pci2: <unknown> at device 17.0 (no driver attached)
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x39fff800000-0x39fff80ffff at device 20.0 numa-domain 0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x93801000-0x938013ff at device 26.0 numa-domain 0 on pci2
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib13: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci2
pci13: <ACPI PCI bus> numa-domain 0 on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 28.2 numa-domain 0 on pci2
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
vgapci0: <VGA-compatible display> mem 0x91000000-0x91ffffff,0x92a88000-0x92a8bfff,0x92000000-0x927fffff at device 0.1 numa-domain 0 on pci14
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x1300-0x131f at device 0.4 numa-domain 0 on pci14
usbus2 numa-domain 0 on uhci0
usbus2: 12Mbps Full Speed USB v1.0
pcib15: <ACPI PCI-PCI bridge> at device 28.4 numa-domain 0 on pci2
pci15: <ACPI PCI bus> numa-domain 0 on pcib15
pci0:2:0:0: error accessing writeable VPD data
bge0: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93190000-0x9319ffff,0x931a0000-0x931affff,0x931b0000-0x931bffff at device 0.0 numa-domain 0 on pci15
bge0: APE FW version: NCSI v1.3.12.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: 1c:98:ec:1d:83:a8
pci0:2:0:1: error accessing writeable VPD data
bge1: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93160000-0x9316ffff,0x93170000-0x9317ffff,0x93180000-0x9318ffff at device 0.1 numa-domain 0 on pci15
bge1: APE FW version: NCSI v1.3.12.0
bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: 1c:98:ec:1d:83:a9
pci0:2:0:2: error accessing writeable VPD data
bge2: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93130000-0x9313ffff,0x93140000-0x9314ffff,0x93150000-0x9315ffff at device 0.2 numa-domain 0 on pci15
bge2: APE FW version: NCSI v1.3.12.0
bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: 1c:98:ec:1d:83:aa
pci0:2:0:3: error accessing writeable VPD data
bge3: <lkpi_pcimlx4_pci_table0, ASIC rev. 0x5719001> mem 0x93100000-0x9310ffff,0x93110000-0x9311ffff,0x93120000-0x9312ffff at device 0.3 numa-domain 0 on pci15
bge3: APE FW version: NCSI v1.3.12.0
bge3: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5719C 1000BASE-T media interface> PHY 4 on miibus3
brgphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: 1c:98:ec:1d:83:ab
pcib16: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci2
pci16: <ACPI PCI bus> numa-domain 0 on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 28.7 numa-domain 0 on pci2
pci17: <ACPI PCI bus> numa-domain 0 on pcib17
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x93800000-0x938003ff at device 29.0 numa-domain 0 on pci2
usbus3: EHCI version 1.0
usbus3 numa-domain 0 on ehci1
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci2
isa0: <ISA bus> numa-domain 0 on isab0
pcib18: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci18: <ACPI PCI bus> numa-domain 0 on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci18
pci19: <ACPI PCI bus> numa-domain 0 on pcib19
pcib20: <ACPI PCI-PCI bridge> at device 1.0 numa-domain 0 on pci18
pci20: <ACPI PCI bus> numa-domain 0 on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 1.1 numa-domain 0 on pci18
pci21: <ACPI PCI bus> numa-domain 0 on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci18
pci22: <ACPI PCI bus> numa-domain 0 on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 2.1 numa-domain 0 on pci18
pci23: <ACPI PCI bus> numa-domain 0 on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 2.2 numa-domain 0 on pci18
pci24: <ACPI PCI bus> numa-domain 0 on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 2.3 numa-domain 0 on pci18
pci25: <ACPI PCI bus> numa-domain 0 on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci18
pci26: <ACPI PCI bus> numa-domain 0 on pcib26
pcib27: <ACPI PCI-PCI bridge> at device 3.1 numa-domain 0 on pci18
pci27: <ACPI PCI bus> numa-domain 0 on pcib27
pcib28: <ACPI PCI-PCI bridge> at device 3.2 numa-domain 0 on pci18
pci28: <ACPI PCI bus> numa-domain 0 on pcib28
pcib29: <ACPI PCI-PCI bridge> at device 3.3 numa-domain 0 on pci18
pci29: <ACPI PCI bus> numa-domain 0 on pcib29
cpu0: <ACPI CPU> numa-domain 0 on acpi0
uart1: <Non-standard ns8250 class UART with FIFOs> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 236c00002400
device_attach: est23 attach returned 6
Timecounter "TSC-low" frequency 1698033079 Hz quality 1000
Timecounters tick every 1.000 msec
ugen2.1: <HP UHCI root HUB> at usbus2
ugen0.1: <Intel XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 numa-domain 0ugen3.1: <Intel EHCI root HUB> at usbus3
 on usbus2
uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1 numa-domain 0 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2 numa-domain 0 on usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3 numa-domain 0 on usbus0
uhub3: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
da0 at ciss0 bus 32 scbus1 target 0 lun 0
da0: <ATA MK0100GCTYU HPG4> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number BTTV436403Q1100FGN
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 95396MB (195371568 512 byte sectors)
da1 at ciss0 bus 32 scbus1 target 1 lun 0
da1: <ATA MK0100GCTYU HPG4> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number BTTV524005QX100FGN
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 95396MB (195371568 512 byte sectors)
uhub0: 2 ports with 2 removable, self powered
mlx4_core0: <mlx4_core> mem 0x93200000-0x932fffff,0x39fff000000-0x39fff7fffff at device 0.0 numa-domain 0 on pci9
<6>mlx4_core: Mellanox ConnectX core driver v3.7.1 (November 2021)
mlx4_core: Initializing 0000:08:00.0
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4 numa-domain 0 on uhub1
uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub3: 21 ports with 21 removable, self powered
mlx4_core0: Unable to determine PCI device chain minimum BW
mlx4_en mlx4_core0: Activating port:1
ugen3.2: <vendor 0x8087 product 0x8002> at usbus3
uhub5 numa-domain 0 on uhub2
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus3
uhub_attach: port 6 power on or off failed, USB_ERR_TIMEOUT
mlxen0: link state changed to DOWN
mlxen0: Ethernet address: ec:0d:9a:1d:47:90
<4>mlx4_en: mlx4_core0: Port 1: Using 24 TX rings
<4>mlx4_en: mlx4_core0: Port 1: Using 16 RX rings
<4>mlx4_en: mlxen0: Using 24 TX rings
<4>mlx4_en: mlxen0: Using 16 RX rings
uhub4: 6 ports with 6 removable, self powered
<4>mlx4_en: mlxen0: Initializing port
mlx4_en mlx4_core0: Activating port:2
mlxen1: link state changed to DOWN
mlxen1: Ethernet address: ec:0d:9a:1d:47:91
<4>mlx4_en: mlx4_core0: Port 2: Using 24 TX rings
<4>mlx4_en: mlx4_core0: Port 2: Using 16 RX rings
<4>mlx4_en: mlxen1: Using 24 TX rings
<4>mlx4_en: mlxen1: Using 16 RX rings
<4>mlx4_en: mlxen1: Initializing port
Trying to mount root from zfs:zroot/ROOT/default []...
ugen0.2: <vendor 0x0424 product 0x2660> at usbus0
uhub6 numa-domain 0 on uhub3
uhub6: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 1> on usbus0
ugen2.2: <BMC Virtual Keyboard> at usbus2
ukbd0 numa-domain 0 on uhub0
ukbd0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2
uhub5: 8 ports with 8 removable, self powered
kbd2 at ukbd0
uhub6: 2 ports with 1 removable, self powered
Dual Console: Serial Primary, Video Secondary
Mounting filesystems...
no pools available to import
Setting hostuuid: b9c71862-d87a-48fb-8804-05462fa65173.
Setting hostid: 0xc69de5f4.
>>> Invoking import script 'importer'
Configuring crash dump device: /dev/da0p3
swapon: adding /dev/da0p3 as swap device
swapon: adding /dev/da1p3 as swap device
.ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.42/mach/CORE
32-bit compatibility ldconfig path:
done.
>>> Invoking early script 'upgrade'
>>> Invoking early script 'configd'
Starting configd.
>>> Invoking early script 'templates'
Generating configuration: templates...done
>>> Invoking early script 'backup'
>>> Invoking backup script 'captiveportal'
>>> Invoking backup script 'netflow'
>>> Invoking backup script 'rrd'
>>> Invoking early script 'carp'
CARP event system: OK
Launching the init system...done.
Initializing..........done.
Starting device manager...driver bug: Unable to set devclass (class: atrtc devname: (unknown))
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
ioat0: <BDX IOAT Ch0> mem 0x39fff82c000-0x39fff82ffff at device 4.0 numa-domain 0 on pci2
ioat0: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat1: <BDX IOAT Ch1> mem 0x39fff828000-0x39fff82bfff at device 4.1 numa-domain 0 on pci2
ioat1: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat2: <BDX IOAT Ch2> mem 0x39fff824000-0x39fff827fff at device 4.2 numa-domain 0 on pci2
ioat2: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat3: <BDX IOAT Ch3> mem 0x39fff820000-0x39fff823fff at device 4.3 numa-domain 0 on pci2
ioat3: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat4: <BDX IOAT Ch4> mem 0x39fff81c000-0x39fff81ffff at device 4.4 numa-domain 0 on pci2
ioat4: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat5: <BDX IOAT Ch5> mem 0x39fff818000-0x39fff81bfff at device 4.5 numa-domain 0 on pci2
ioat5: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat6: <BDX IOAT Ch6> mem 0x39fff814000-0x39fff817fff at device 4.6 numa-domain 0 on pci2
ioat6: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat7: <BDX IOAT Ch7> mem 0x39fff810000-0x39fff813fff at device 4.7 numa-domain 0 on pci2
ioat7: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat8: <BDX IOAT Ch0> mem 0x3bffff1c000-0x3bffff1ffff at device 4.0 numa-domain 0 on pci18
ioat8: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat9: <BDX IOAT Ch1> mem 0x3bffff18000-0x3bffff1bfff at device 4.1 numa-domain 0 on pci18
ioat9: Capabilities: 2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat10: <BDX IOAT Ch2> mem 0x3bffff14000-0x3bffff17fff at device 4.2 numa-domain 0 on pci18
ioat10: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat11: <BDX IOAT Ch3> mem 0x3bffff10000-0x3bffff13fff at device 4.3 numa-domain 0 on pci18
ioat11: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat12: <BDX IOAT Ch4> mem 0x3bffff0c000-0x3bffff0ffff at device 4.4 numa-domain 0 on pci18
ioat12: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat13: <BDX IOAT Ch5> mem 0x3bffff08000-0x3bffff0bfff at device 4.5 numa-domain 0 on pci18
ioat13: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat14: <BDX IOAT Ch6> mem 0x3bffff04000-0x3bffff07fff at device 4.6 numa-domain 0 on pci18
ioat14: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ioat15: <BDX IOAT Ch7> mem 0x3bffff00000-0x3bffff03fff at device 4.7 numa-domain 0 on pci18
ioat15: Capabilities: f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Break>
ichsmb0: <Intel Wellsburg SMBus controller> port 0x4000-0x401f mem 0x39fff831000-0x39fff8310ff at device 31.3 numa-domain 0 on pci2
smbus0: <System Management Bus> numa-domain 0 on ichsmb0
ums0 numa-domain 0 on uhub0
ums0: <BMC Virtual Keyboard, class 0/0, rev 1.10/0.02, addr 2> on usbus2
done.
Configuring login behaviour...done.
Configuring loopback interface...lo0: link state changed to UP
done.
Configuring kernel modules...coretemp0: <CPU On-Die Thermal Sensors> numa-domain 0 on cpu0
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17b400000c00
device_attach: est0 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 17b400000c00
device_attach: est1 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est2 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est3 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est4 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est5 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est6 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est7 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est8 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 225900002200
device_attach: est9 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est10 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est11 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est12 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est13 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est14 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est15 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est16 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est17 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est18 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est19 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est20 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est21 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est22 attach returned 6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 244800002400
device_attach: est23 attach returned 6
done.
Setting up extended sysctls...done.
Setting timezone: Australia/Perth
Writing firmware settings: OPNsense
Writing trust files...done.
Scanning /usr/share/certs/untrusted for certificates...
Scanning /usr/share/certs/trusted for certificates...
Scanning /usr/local/share/certs for certificates...
certctl: No changes to trust store were made.
Writing trust bundles...done.
Setting hostname: router2.internal.edwardscroop.com
Generating /etc/resolv.conf...done.
Generating /etc/hosts...done.
Configuring system logging...done.
Configuring firewall.......done.
Configuring hardware interfaces...done.
Configuring loopback interface...done.
Configuring LAGG interfaces...<6>mlx4_en: mlxen1: Link Down
<6>mlx4_en: mlxen1: Link Up
done.
Configuring VLAN interfaces...done.
Configuring HomelabVLAN interface...done.
Configuring HomelabinternetVLAN interface...done.
Configuring ManagementVLAN interface...done.
Configuring PFSYNC interface...done.
Configuring LAN interface...done.
Generating /etc/resolv.conf...done.
Generating /etc/hosts...done.
Configuring firewall.......done.
Configuring OpenSSH...done.
Starting web GUI...done.
Setting up routes...done.
Starting router advertisement service...done.
Configuring firewall.......done.
Setting up gateway monitor...done.
Syncing OpenVPN settings...done.
Starting power daemon...done.
Starting UPnP IGD & PCP/NAT-PMP service...done.
Starting NTP service...done.
>>> Invoking start script 'newwanip'
>>> Invoking start script 'freebsd'
Sync KEA DHCP config...done.
Starting kea.
INFO/keactrl: Starting /usr/local/sbin/kea-dhcp4 -c /usr/local/etc/kea/kea-dhcp4.conf
INFO/keactrl: Starting /usr/local/sbin/kea-ctrl-agent -c /usr/local/etc/kea/kea-ctrl-agent.conf
Starting vnstat.
>>> Invoking start script 'syslog'
>>> Invoking start script 'carp'
>>> Invoking start script 'cron'
Starting Cron: OK
>>> Invoking start script 'openvpn'
>>> Invoking start script 'sysctl'
Service `sysctl' has been restarted.
>>> Invoking start script 'beep'
Root file system: zroot/ROOT/default
Wed Aug 12 19:37:36 AWST 2026
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.