compaq proliant 5500
jonathan michaels <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.smp |
|---|---|
| Message-ID | <[email protected]> |
greetings all, i have just aquired a compaq proliant 5500 with 2 (out of the available 4 slots) 550/100 PIII intel zeon cpus --- it also has a 50 gb raid5 "array" (made up with 5x 9.1 gb scsi3 ultra drives), 1.2 gb dram and a truckload of fans and optional powersully and all sorts of redundant stuff in this box. my question is in regards to compiling a new kernel .. i've been using freebsd since v2.0.5-release, with the main backbone still using intel i486dx33 macyines and freebsd v2.2.5-release. in one step i have plunged into the 2006's both hardware and operating system. there are several ways to build a new kernel, which would be the simplest one and for the easiest to understand (i hace some cognitive impearment caused by brain damage from birth, i'm on welfare). how would i go about setting up teh "make.conf" file to take up the advantages of have a multiple cpu machine. finally, to upgrade this platform, can i add cpu's one at a time or i it only possible to add cpus two at a time. thank you for good reliable platform that even somebody like me can setup a functional reliable platform .. thank you. most kind regards jonathan -- ================================================================ powered by .. QNX, OS9 and freeBSD -- http://caamora com au/operating system ==== === appropriate solution in an inappropriate world === ==== _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-smp To unsubscribe, send any mail to "[email protected]"