oltr3137 issue?

Hi I have to setup a machine using that pci tokenring adapter. I have 
successfully compiled and installed kernel with
device oltr0
pseudo-device token 

with scanpci command it finds hardware
pci bus 0x0002 cardnum 0x02 function 0x00: vendor 0x108d device 0x0001
Olicom Token-Ring 16/4 PCI Adapter (3136/3137)
and with dmesg i can get this: 

Jul 16 20:07:23 pdp /kernel: oltr0: <Olicom PCI/II 16/4 Adapter (OC-3137)> 
port
0xa000-0xa03f irq 5 at device 2.0 on pci2 

ifconfig -m shows:
oltr0: flags=2<BROADCAST> mtu 1500
       inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
       lladdr 0.0.83.63.75.a3
       media: Token ring UTP/16Mbit
       supported media:
               media UTP/16Mbit
               media UTP/4Mbit
but I constantly get this error message sent to /dev/console:
oltr0: adapter init failure 0x711
oltr0: adapter init failure 0x711 

I have no idea what is wrong with it. Any ideas? 

 

 


=-=-=-=-=-=-=-=-=-=-=-
Omer Faruk Sen
http://www.faruk.net
For Public Key: http://www.faruk.net/omer.asc
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-tokenring
To unsubscribe, send any mail to "[email protected]"