Re: fence_wait returned with error -512

On Thu, Sep 27, 2018 at 4:40 PM Steve Kargl <
[email protected]> wrote:

> On Thu, Sep 27, 2018 at 02:41:45PM -0700, Johannes Lundberg wrote:
> >
> > That’s life in -CURRENT :)
> > drm-legacy (and drm-devel) are from now only buildable on >= r338948.
> >
>
> Code from github doesn't work either. :(
>
> The following are from the gpu-firmware-kmod port:
>
> % ls /boot/modules/*CAIC*
> /boot/modules/radeon_CAICOS_mc_bin.ko*
> /boot/modules/radeon_CAICOS_me_bin.ko*
> /boot/modules/radeon_CAICOS_pfp_bin.ko*
> /boot/modules/radeon_CAICOS_smc_bin.ko*
>
> % dmesg | grep drm
>
> info: [drm] Initialized drm 1.1.0 20060810
> drmn0: <Caicos [Radeon HD 6450]> on vgapci0
> info: [drm] RADEON_IS_PCIE
> info: [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779
> 0x1092:0x6450).
> info: [drm] register mmio base: 0xFEA20000
> info: [drm] register mmio size: 131072
> info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
> info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:0:0,
> vendor=1002, device=6779
> info: [drm] radeon_atrm_get_bios: Get ACPI device handle
> info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
> info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
> info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
> info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
> info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
> info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000
> (262144 bytes)
> info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2070
> info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
> info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072
> bytes)
> info: [drm] ATOM BIOS: C26401
> drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M
> used)
> drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
> info: [drm] Detected VRAM RAM=1024M, BAR=256M
> info: [drm] RAM width 64bits DDR
> info: [drm] radeon: 1024M of VRAM memory ready
> info: [drm] radeon: 512M of GTT memory ready.
> info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> info: [drm] Driver supports precise vblank timestamp query.
> info: [drm] MSI enabled 1 message(s)
> drmn0: info: radeon: using MSI.
> info: [drm] radeon: irq initialized.
> info: [drm] GART: num cpu pages 131072, num gpu pages 131072
> info: [drm] probing gen 2 caps for device 1002:5a16 = 2/0
> info: [drm] enabling PCIE gen 2 link speeds, disable with
> radeon.pcie_gen2=0
> info: [drm] Loading CAICOS Microcode
> error: [drm:pid911:ni_init_microcode] *ERROR* ni_cp: Failed to load
> firmware "radeonkmsfw_CAICOS_pfp"
> error: [drm:pid911:evergreen_startup] *ERROR* Failed to load firmware!
> drmn0: error: disabling GPU acceleration
> drmn0: warning: 0xfffff80007311800 unpin not necessary
> drmn0: warning: 0xfffff80007311800 unpin not necessary
> error: [drm:pid911:evergreen_init] *ERROR* radeon: MC ucode required for
> NI+.
> drmn0: error: Fatal error during GPU init
> info: [drm] radeon: finishing device.
> info: [drm] radeon: ttm finalized
> device_attach: drmn0 attach returned 22
>
> There is not radeonkmsfw_CAICOS_pfp[.ko].  Note, copying
> /boot/modules/radeon_CAICOS_pfp_bin.ko to
> /boot/modules/radeonkmsfw_CAICOS_pfp.ko will load the
> module, but it won't register.
>
>
I pushed a fix for firmware names. Please run git pull and try again.

-- 
> steve
>
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"