Re: Help with UHD Graphics 630

"Montgomery-Smith, Stephen" <[email protected]>
Newsgroups gmane.os.freebsd.devel.x11
Message-ID <[email protected]> 
On 11/12/18 1:12 PM, Pete Wright wrote:
> 
> 
> On 11/12/18 9:33 AM, Montgomery-Smith, Stephen wrote:
>> I have a Dell Optiplex 5060, which has the i5-8500 CPU and the UHD
>> Graphics 630 Card.  I am currently running FreeBSD-12.
>>
>> How do I get this graphics card to work with something other than the
>> VESA driver?
>>
>> I did some googling, and installed the drm-next-kmod port, but that
>> didn't seem to work.  kldstat has i915kms listed.
> 
> its hard to help without more information, but a quick think to check is 
> to make sure you are in the "video" group.  if you are and are still 
> having issues can you please send over the output of "dmesg" as well as 
> a copy of your /var/log/Xorg.0.log?


Thanks.  Yes, I am in the video group.  Here are the outputs as 
attachments.  I'll send it again if the attachments get removed.

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"
dmesg (text/plain, 7.4 KB) 
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-BETA4 r340310 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 800x600
module_register: cannot register pci/xhci from kernel; already loaded from xhci.ko
Module pci/xhci failed to register: 17
CPU: Intel(R) Core(TM) i5-8500 CPU @ 3.00GHz (3000.21-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906ea  Family=0x6  Model=0x9e  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features2=0x40000000<SGXLC>
  Structured Extended Features3=0xc000000<IBPB,STIBP>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8072871936 (7698 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL   CBX3   >
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
Launching APs: 4 5 1 2 3
Timecounter "TSC-low" frequency 1500104480 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f8690, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL CBX3   > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xd0000000-0xd0ffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xd11a0000-0xd11affff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0x3090-0x3097,0x3080-0x3083,0x3060-0x307f mem 0xd11b0000-0xd11b7fff,0xd11bf000-0xd11bf0ff,0xd1100000-0xd117ffff irq 22 at device 23.0 on pci0
ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Coffelake HDA Controller> mem 0xd11b8000-0xd11bbfff,0xd1000000-0xd10fffff irq 21 at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> mem 0xd1180000-0xd119ffff irq 16 at device 31.6 on pci0
em0: attach_pre capping queues at 1
em0: using 1024 tx descriptors and 1024 rx descriptors
em0: msix_init qsets capped at 1
em0: Unable to map MSIX table 
em0: Using an MSI interrupt
em0: allocated for 1 tx_queues
em0: allocated for 1 rx_queues
em0: Ethernet address: 54:bf:64:61:35:f1
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
acpi_syscontainer0: <System Container> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC255 (Front Analog Line-out)> at nid 27 on hdaa0
hdacc1: <Intel Kabylake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kabylake Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Kabylake (HDMI/DP 8ch)> at nid 3 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MQ01ACF050 AV003D> ATA8-ACS SATA 3.x device
ada0: Serial Number 58NETJIGT
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <HL-DT-ST DVD+-RW GU90N A1C3> Removable CD-ROM SCSI device
cd0: Serial Number M16I4921104
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub0: 26 ports with 26 removable, self powered
ugen0.2: <Dell Dell Multimedia Pro Keyboard Hub> at usbus0
uhub1 on uhub0
uhub1: <Dell Multimedia Pro Keyboard Hub> on usbus0
uhub1: 3 ports with 2 removable, bus powered
anon_inodefs_init: 
ugen0.3: <Dell Dell Multimedia Pro Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <Dell Multimedia Pro Keyboard> on usbus0
kbd2 at ukbd0
lo0: link state changed to UP
ugen0.4: <Logitech USB Optical Mouse> at usbus0
ugen0.5: <Hewlett-Packard HP LaserJet P2055dn> at usbus0
em0: link state changed to UP
uhid0 on uhub1
uhid0: <Dell Multimedia Pro Keyboard> on usbus0
ums0 on uhub1
ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
ulpt0 on uhub0
ulpt0: <Printer> on usbus0
ulpt0: using bi-directional mode
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
Security policy loaded: MAC/ntpd (mac_ntpd)
WARNING pid 33489 (python2.7): ioctl sign-extension ioctl ffffffff80087467
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.