drm-legacy-kmod-g20181031_1 on 13-current
AN <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.x11 |
|---|---|
| Message-ID | <[email protected]> |
Hi:
I would like to thank everyone who helps to provide a modern graphics
stack on FreeBSD. I have the following setup and am having some issues
with screen tearing/artifacts mostly in mate-terminal windows. I tried
the suggestion at https://wiki.freebsd.org/Graphics/FAQ 2.3.1. AMD GPU,
however it did not work for me as X failed to start, maybe I missed
something.
Below is relevent info, if more is needed please let me know.
FreeBSD FBSD_13 13.0-CURRENT FreeBSD 13.0-CURRENT #4 r340626: Mon Nov 19
08:56:38 EST 2018
root@FBSD_13:/usr/obj/usr/src/amd64.amd64/sys/MYKERNEL amd64 1300003
drm-legacy-kmod-g20181031_1 Legacy DRM modules for the linuxkpi-based
KMS components
libdrm-2.4.93,1 Userspace interface to kernel Direct
Rendering Module services
From dmesg:
info: [drm] Initialized drm 1.1.0 20060810
drmn0: <Caicos [Radeon HD 7400 Series]> on vgapci0
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (CAICOS 0x1002:0x677B
0x1043:0x3021).
info: [drm] register mmio base: 0xFE620000
info: [drm] register mmio size: 131072
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:34:0:0,
vendor=1002, device=677b
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table:
AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xe0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800e0000000
(262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x0000
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072
bytes)
info: [drm] ATOM BIOS: 677BHB.13.12.0.49.AS01
drmn0: info: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M
used)
drmn0: info: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
info: [drm] Detected VRAM RAM=1024M, BAR=256M
info: [drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 12545042 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
info: [drm] radeon: 1024M of VRAM memory ready
info: [drm] radeon: 512M of GTT memory ready.
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
info: [drm] MSI enabled 1 message(s)
drmn0: info: radeon: using MSI.
info: [drm] radeon: irq initialized.
info: [drm] GART: num cpu pages 131072, num gpu pages 131072
info: [drm] probing gen 2 caps for device 1022:43b4 = 2/6
info: [drm] enabling PCIE gen 2 link speeds, disable with
radeon.pcie_gen2=0
info: [drm] Loading CAICOS Microcode
radeon/CAICOS_pfp.bin: could not load firmware image, error 2
uhub0: 8 ports with 8 removable, self powered
radeon/CAICOS_pfp.bin: could not load firmware image, error 2
drmn0: Successfully loaded firmware image with name (mapped name):
radeon/CAICOS_pfp.bin (radeon_CAICOS_pfp_bin)
radeon/CAICOS_me.bin: could not load firmware image, error 2
uhub1: 22 ports with 22 removable, self powered
radeon/CAICOS_me.bin: could not load firmware image, error 2
drmn0: Successfully loaded firmware image with name (mapped name):
radeon/CAICOS_me.bin (radeon_CAICOS_me_bin)
radeon/BTC_rlc.bin: could not load firmware image, error 2
ugen0.2: <Corsair Components, Inc. H100i v2> at usbus0
radeon/BTC_rlc.bin: could not load firmware image, error 2
drmn0: Successfully loaded firmware image with name (mapped name):
radeon/BTC_rlc.bin (radeon_BTC_rlc_bin)
radeon/CAICOS_mc.bin: could not load firmware image, error 2
ugen0.3: <Logitech USB Receiver> at usbus0
ukbd0 on uhub1
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/29.00, addr 2> on
usbus0
kbd2 at ukbd0
radeon/CAICOS_mc.bin: could not load firmware image, error 2
drmn0: Successfully loaded firmware image with name (mapped name):
radeon/CAICOS_mc.bin (radeon_CAICOS_mc_bin)
info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
drmn0: info: WB enabled
drmn0: info: fence driver on ring 0 use gpu addr 0x0000000040000c00 and
cpu addr 0x0xfffff80005e53c00
drmn0: info: fence driver on ring 3 use gpu addr 0x0000000040000c0c and
cpu addr 0x0xfffff80005e53c0c
info: [drm] ring test on 0 succeeded in 2 usecs
info: [drm] ring test on 3 succeeded in 1 usecs
info: [drm] ib test on ring 0 succeeded in 0 usecs
info: [drm] ib test on ring 3 succeeded in 0 usecs
info: [drm] radeon_device_init: Taking over the fictitious range
0xe0000000-0xf0000000
radeon_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
radeon_iicbb1 on drmn0
iicbus1: <Philips I2C bus> on iicbb1 addr 0xff
iic1: <I2C generic I/O> on iicbus1
radeon_iicbb2 on drmn0
iicbus2: <Philips I2C bus> on iicbb2 addr 0xff
iic2: <I2C generic I/O> on iicbus2
radeon_iicbb3 on drmn0
iicbus3: <Philips I2C bus> on iicbb3 addr 0xff
iic3: <I2C generic I/O> on iicbus3
radeon_iicbb4 on drmn0
iicbus4: <Philips I2C bus> on iicbb4 addr 0xff
iic4: <I2C generic I/O> on iicbus4
radeon_iicbb5 on drmn0
iicbus5: <Philips I2C bus> on iicbb5 addr 0xff
iic5: <I2C generic I/O> on iicbus5
radeon_iicbb6 on drmn0
iicbus6: <Philips I2C bus> on iicbb6 addr 0xff
iic6: <I2C generic I/O> on iicbus6
radeon_iicbb7 on drmn0
iicbus7: <Philips I2C bus> on iicbb7 addr 0xff
iic7: <I2C generic I/O> on iicbus7
info: [drm] Radeon Display Connectors
info: [drm] Connector 0:
info: [drm] HDMI-A-1
info: [drm] HPD2
info: [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
info: [drm] Encoders:
info: [drm] DFP1: INTERNAL_UNIPHY1
info: [drm] Connector 1:
info: [drm] DVI-D-1
info: [drm] HPD4
info: [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
info: [drm] Encoders:
info: [drm] DFP2: INTERNAL_UNIPHY
info: [drm] Connector 2:
info: [drm] VGA-1
info: [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
info: [drm] Encoders:
info: [drm] CRT1: INTERNAL_KLDSCP_DAC1
info: [drm] Internal thermal controller without fan control
info: [drm] radeon: power management initialized
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.HDMI-A-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector DVI-D-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.DVI-D-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm] - kern.vt.fb.modes.VGA-1
info: [drm] - kern.vt.fb.default_mode
info: [drm] fb mappable at 0xE0142000
info: [drm] vram apper at 0xE0000000
info: [drm] size 5242880
info: [drm] fb depth is 24
info: [drm] pitch is 5120
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized radeon 2.29.0 20080528 for drmn0 on minor 0
vgapci0@pci0:34:0:0: class=0x030000 card=0x30211043 chip=0x677b1002
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Caicos PRO [Radeon HD 7450]'
class = display
subclass = VGA
bar [10] = type Prefetchable Memory, range 64, base 0xe0000000, size
268435456, enabled
bar [18] = type Memory, range 64, base 0xfe620000, size 131072,
enabled
bar [20] = type I/O Port, range 32, base 0xe000, size 256, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) RO NS
link x4(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 2 corrected
PCI-e errors = Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
Non-fatal = Unsupported Request
Corrected = Bad TLP
Advisory Non-Fatal Error
hdac0@pci0:34:0:1: class=0x040300 card=0xaa981043 chip=0xaa981002
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Caicos HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM /
R5 230/235/235X OEM]'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xfe640000, size 16384,
enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) RO NS
link x4(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 2 corrected
PCI-e errors = Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
Non-fatal = Unsupported Request
Corrected = Bad TLP
Advisory Non-Fatal Error
Here is Xorg when started successfully via startx without an Xorg config
file:
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 122.295] X Protocol Version 11, Revision 0
[ 122.295] Build Operating System: FreeBSD 13.0-CURRENT amd64
[ 122.295] Current Operating System: FreeBSD FBSD_13 13.0-CURRENT
FreeBSD 13.0-CURRENT #4 r340626: Mon Nov 19 08:56:38 EST 2018
root@FBSD_13:/usr/obj/usr/src/amd64.amd64/sys/MYKERNEL amd64
[ 122.295] Build Date: 13 November 2018 12:17:41PM
[ 122.295]
[ 122.295] Current version of pixman: 0.34.0
[ 122.295] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 122.295] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 122.295] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 19
09:58:14 2018
[ 122.295] (II) Loader magic: 0x413020
[ 122.295] (II) Module ABI versions:
[ 122.295] X.Org ANSI C Emulation: 0.4
[ 122.295] X.Org Video Driver: 20.0
[ 122.295] X.Org XInput driver : 22.1
[ 122.295] X.Org Server Extension : 9.0
[ 122.295] (--) PCI:*(0:34:0:0) 1002:677b:1043:3021 rev 0, Mem @
0xe0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @
0x????????/65536
[ 122.295] (==) Using default built-in configuration (39 lines)
[ 122.295] (==) --- Start of built-in configuration ---
[ 122.295] Section "Device"
[ 122.295] Identifier "Builtin Default ati Device 0"
[ 122.295] Driver "ati"
[ 122.295] EndSection
[ 122.295] Section "Screen"
[ 122.295] Identifier "Builtin Default ati Screen 0"
[ 122.295] Device "Builtin Default ati Device 0"
[ 122.295] EndSection
[ 122.295] Section "Device"
[ 122.295] Identifier "Builtin Default modesetting
Device 0"
[ 122.295] Driver "modesetting"
[ 122.295] EndSection
[ 122.295] Section "Screen"
[ 122.295] Identifier "Builtin Default modesetting
Screen 0"
[ 122.295] Device "Builtin Default modesetting Device 0"
[ 122.295] EndSection
[ 122.295] Section "Device"
[ 122.295] Identifier "Builtin Default scfb Device 0"
[ 122.295] Driver "scfb"
[ 122.295] EndSection
[ 122.295] Section "Screen"
[ 122.295] Identifier "Builtin Default scfb Screen 0"
[ 122.295] Device "Builtin Default scfb Device 0"
[ 122.295] EndSection
[ 122.295] Section "Device"
[ 122.295] Identifier "Builtin Default vesa Device 0"
[ 122.295] Driver "vesa"
[ 122.295] EndSection
[ 122.295] Section "Screen"
[ 122.295] Identifier "Builtin Default vesa Screen 0"
[ 122.295] Device "Builtin Default vesa Device 0"
[ 122.295] EndSection
[ 122.295] Section "ServerLayout"
[ 122.295] Identifier "Builtin Default Layout"
[ 122.295] Screen "Builtin Default ati Screen 0"
[ 122.295] Screen "Builtin Default modesetting Screen 0"
[ 122.295] Screen "Builtin Default scfb Screen 0"
[ 122.295] Screen "Builtin Default vesa Screen 0"
[ 122.295] EndSection
[ 122.295] (==) --- End of built-in configuration ---
[ 122.295] (==) ServerLayout "Builtin Default Layout"
[ 122.295] (**) |-->Screen "Builtin Default ati Screen 0" (0)
[ 122.295] (**) | |-->Monitor "<default monitor>"
[ 122.295] (**) | |-->Device "Builtin Default ati Device 0"
[ 122.295] (==) No monitor specified for screen "Builtin Default ati
Screen 0".
Using a default monitor configuration.
[ 122.295] (**) |-->Screen "Builtin Default modesetting Screen 0" (1)
[ 122.295] (**) | |-->Monitor "<default monitor>"
[ 122.295] (**) | |-->Device "Builtin Default modesetting Device 0"
[ 122.295] (==) No monitor specified for screen "Builtin Default
modesetting Screen 0".
Using a default monitor configuration.
[ 122.295] (**) |-->Screen "Builtin Default scfb Screen 0" (2)
[ 122.295] (**) | |-->Monitor "<default monitor>"
[ 122.296] (**) | |-->Device "Builtin Default scfb Device 0"
[ 122.296] (==) No monitor specified for screen "Builtin Default scfb
Screen 0".
Using a default monitor configuration.
[ 122.296] (**) |-->Screen "Builtin Default vesa Screen 0" (3)
[ 122.296] (**) | |-->Monitor "<default monitor>"
[ 122.296] (**) | |-->Device "Builtin Default vesa Device 0"
[ 122.296] (==) No monitor specified for screen "Builtin Default vesa
Screen 0".
Using a default monitor configuration.
[ 122.296] (==) Automatically adding devices
[ 122.296] (==) Automatically enabling devices
[ 122.296] (==) Not automatically adding GPU devices
[ 122.296] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 122.296] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 122.296] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 122.296] (II) The server relies on devd to provide the list of input
devices.
If no devices become available, reconfigure devd or disable
AutoAddDevices.
[ 122.296] (II) LoadModule: "glx"
[ 122.296] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 122.297] (II) Module glx: vendor="X.Org Foundation"
[ 122.297] compiled for 1.18.4, module version = 1.0.0
[ 122.297] ABI class: X.Org Server Extension, version 9.0
[ 122.297] (==) AIGLX enabled
[ 122.297] (II) LoadModule: "ati"
[ 122.297] (WW) Warning, couldn't open module ati
[ 122.297] (II) UnloadModule: "ati"
[ 122.297] (II) Unloading ati
[ 122.297] (EE) Failed to load module "ati" (module does not exist, 0)
[ 122.297] (II) LoadModule: "modesetting"
[ 122.297] (II) Loading
/usr/local/lib/xorg/modules/drivers/modesetting_drv.so
[ 122.298] (II) Module modesetting: vendor="X.Org Foundation"
[ 122.298] compiled for 1.18.4, module version = 1.18.4
[ 122.298] Module class: X.Org Video Driver
[ 122.298] ABI class: X.Org Video Driver, version 20.0
[ 122.298] (II) LoadModule: "scfb"
[ 122.298] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[ 122.298] (II) Module scfb: vendor="X.Org Foundation"
[ 122.298] compiled for 1.18.4, module version = 0.0.4
[ 122.298] ABI class: X.Org Video Driver, version 20.0
[ 122.298] (II) LoadModule: "vesa"
[ 122.298] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[ 122.299] (II) Module vesa: vendor="X.Org Foundation"
[ 122.299] compiled for 1.18.4, module version = 2.4.0
[ 122.299] Module class: X.Org Video Driver
[ 122.299] ABI class: X.Org Video Driver, version 20.0
[ 122.299] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 122.299] (II) scfb: driver for wsdisplay framebuffer: scfb
[ 122.299] (II) VESA: driver for VESA chipsets: vesa
[ 122.299] (--) Using syscons driver with X support (version 2.0)
[ 122.299] (--) using VT number 9
[ 122.299] (**) modeset(0): claimed PCI slot 34@0:0:0
[ 122.299] (II) modeset(0): using default device
[ 122.299] (WW) Falling back to old probe method for scfb
[ 122.299] scfb trace: probe start
[ 122.299] scfb trace: probe done
[ 122.299] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[ 122.299] (II) modeset(0): Creating default Display subsection in
Screen section
"Builtin Default modesetting Screen 0" for depth/fbbpp 24/32
[ 122.299] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 122.299] (==) modeset(0): RGB weight 888
[ 122.299] (==) modeset(0): Default visual is TrueColor
[ 122.299] (II) Loading sub module "glamoregl"
[ 122.299] (II) LoadModule: "glamoregl"
[ 122.300] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
[ 122.317] (II) Module glamoregl: vendor="X.Org Foundation"
[ 122.317] compiled for 1.18.4, module version = 1.0.0
[ 122.317] ABI class: X.Org ANSI C Emulation, version 0.4
[ 122.317] (II) glamor: OpenGL accelerated X.org driver based.
[ 122.652] (II) glamor: EGL version 1.4 (DRI2):
[ 122.664] (II) modeset(0): glamor initialized
[ 122.664] (II) modeset(0): Output HDMI-1 has no monitor section
[ 122.725] (II) modeset(0): Output DVI-D-1 has no monitor section
[ 122.731] (II) modeset(0): Output VGA-1 has no monitor section
[ 122.732] (II) modeset(0): EDID for output HDMI-1
[ 122.794] (II) modeset(0): EDID for output DVI-D-1
[ 122.794] (II) modeset(0): Manufacturer: DEL Model: 405b Serial#:
1128482131
[ 122.794] (II) modeset(0): Year: 2009 Week: 41
[ 122.794] (II) modeset(0): EDID Version: 1.3
[ 122.794] (II) modeset(0): Digital Display Input
[ 122.794] (II) modeset(0): Max Image Size [cm]: horiz.: 38 vert.: 30
[ 122.794] (II) modeset(0): Gamma: 2.20
[ 122.794] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 122.794] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[ 122.794] (II) modeset(0): Default color space is primary color space
[ 122.794] (II) modeset(0): First detailed timing is preferred mode
[ 122.794] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300
greenY: 0.600
[ 122.794] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313
whiteY: 0.329
[ 122.794] (II) modeset(0): Supported established timings:
[ 122.794] (II) modeset(0): 720x400@70Hz
[ 122.794] (II) modeset(0): 640x480@60Hz
[ 122.794] (II) modeset(0): 640x480@75Hz
[ 122.794] (II) modeset(0): 800x600@60Hz
[ 122.794] (II) modeset(0): 800x600@75Hz
[ 122.794] (II) modeset(0): 1024x768@60Hz
[ 122.794] (II) modeset(0): 1024x768@75Hz
[ 122.794] (II) modeset(0): 1280x1024@75Hz
[ 122.794] (II) modeset(0): Manufacturer's mask: 0
[ 122.794] (II) modeset(0): Supported standard timings:
[ 122.794] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75
vid: 20337
[ 122.794] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60
vid: 32897
[ 122.794] (II) modeset(0): Supported detailed timing:
[ 122.794] (II) modeset(0): clock: 108.0 MHz Image Size: 376 x 301 mm
[ 122.794] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end
1440 h_blank_end 1688 h_border: 0
[ 122.794] (II) modeset(0): v_active: 1024 v_sync: 1025 v_sync_end
1028 v_blanking: 1066 v_border: 0
[ 122.794] (II) modeset(0): Serial No: RNMH69A6CCES
[ 122.794] (II) modeset(0): Monitor name: DELL P190S
[ 122.794] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H
max: 81 kHz, PixClock max 145 MHz
[ 122.794] (II) modeset(0): EDID (in hex):
[ 122.794] (II) modeset(0): 00ffffffffffff0010ac5b4053454343
[ 122.794] (II) modeset(0): 2913010380261e78eeee95a3544c9926
[ 122.794] (II) modeset(0): 0f5054a54b00714f8180010101010101
[ 122.794] (II) modeset(0): 010101010101302a009851002a403070
[ 122.794] (II) modeset(0): 1300782d1100001e000000ff00524e4d
[ 122.794] (II) modeset(0): 4836394136434345530a000000fc0044
[ 122.794] (II) modeset(0): 454c4c2050313930530a2020000000fd
[ 122.794] (II) modeset(0): 00384c1e510e000a2020202020200030
[ 122.794] (II) modeset(0): Printing probed modes for output DVI-D-1
[ 122.794] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 122.794] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 122.794] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 122.794] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 122.794] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 122.794] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 122.794] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 122.794] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 122.794] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 122.794] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 122.800] (II) modeset(0): EDID for output VGA-1
[ 122.800] (II) modeset(0): Output HDMI-1 disconnected
[ 122.800] (II) modeset(0): Output DVI-D-1 connected
[ 122.800] (II) modeset(0): Output VGA-1 disconnected
[ 122.800] (II) modeset(0): Using exact sizes for initial modes
[ 122.800] (II) modeset(0): Output DVI-D-1 using initial mode 1280x1024
+0+0
[ 122.800] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[ 122.800] (==) modeset(0): DPI set to (96, 96)
[ 122.800] (II) Loading sub module "fb"
[ 122.800] (II) LoadModule: "fb"
[ 122.800] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 122.801] (II) Module fb: vendor="X.Org Foundation"
[ 122.801] compiled for 1.18.4, module version = 1.0.0
[ 122.801] ABI class: X.Org ANSI C Emulation, version 0.4
[ 122.801] (II) UnloadModule: "scfb"
[ 122.801] (II) Unloading scfb
[ 122.801] (II) UnloadModule: "vesa"
[ 122.801] (II) Unloading vesa
[ 122.801] (==) Depth 24 pixmap format is 32 bpp
[ 122.811] (==) modeset(0): Backing store enabled
[ 122.811] (==) modeset(0): Silken mouse enabled
[ 122.812] (II) modeset(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[ 122.813] (==) modeset(0): DPMS enabled
[ 122.813] (II) modeset(0): [DRI2] Setup complete
[ 122.813] (II) modeset(0): [DRI2] DRI driver: r600
[ 122.813] (II) modeset(0): [DRI2] VDPAU driver: r600
[ 122.814] (--) RandR disabled
[ 122.820] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 122.820] (II) AIGLX: enabled GLX_ARB_create_context
[ 122.820] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 122.820] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 122.820] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 122.820] (II) AIGLX: enabled GLX_SGI_swap_control and
GLX_MESA_swap_control
[ 122.820] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 122.820] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 122.820] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 122.820] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer
objects
[ 122.821] (II) AIGLX: Loaded and initialized r600
[ 122.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 122.825] (II) modeset(0): Setting screen physical size to 338 x 270
[ 122.889] (II) config/devd: probing input devices...
[ 122.889] (II) config/devd: adding input device (null) (/dev/kbdmux)
[ 122.889] (II) LoadModule: "kbd"
[ 122.889] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
[ 122.890] (II) Module kbd: vendor="X.Org Foundation"
[ 122.890] compiled for 1.18.4, module version = 1.9.0
[ 122.890] Module class: X.Org XInput Driver
[ 122.890] ABI class: X.Org XInput driver, version 22.1
[ 122.890] (II) Using input driver 'kbd' for 'kbdmux'
[ 122.890] (**) kbdmux: always reports core events
[ 122.890] (**) kbdmux: always reports core events
[ 122.890] (**) Option "Protocol" "standard"
[ 122.890] (**) Option "XkbRules" "base"
[ 122.890] (**) Option "XkbModel" "pc105"
[ 122.890] (**) Option "XkbLayout" "us"
[ 122.890] (**) Option "config_info" "devd:kbdmux"
[ 122.890] (II) XINPUT: Adding extended input device "kbdmux" (type:
KEYBOARD, id 6)
[ 122.890] (II) config/devd: kbdmux is enabled, ignoring device ukbd0
[ 122.890] (II) config/devd: kbdmux is enabled, ignoring device atkbd0
[ 122.890] (II) config/devd: adding input device (null) (/dev/sysmouse)
[ 122.890] (II) LoadModule: "mouse"
[ 122.890] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
[ 122.891] (II) Module mouse: vendor="X.Org Foundation"
[ 122.891] compiled for 1.18.4, module version = 1.9.3
[ 122.891] Module class: X.Org XInput Driver
[ 122.891] ABI class: X.Org XInput driver, version 22.1
[ 122.891] (II) Using input driver 'mouse' for 'sysmouse'
[ 122.891] (**) sysmouse: always reports core events
[ 122.891] (**) Option "Device" "/dev/sysmouse"
[ 122.891] (==) sysmouse: Protocol: "Auto"
[ 122.891] (**) sysmouse: always reports core events
[ 122.891] (==) sysmouse: Emulate3Buttons, Emulate3Timeout: 50
[ 122.891] (**) sysmouse: ZAxisMapping: buttons 4 and 5
[ 122.891] (**) sysmouse: Buttons: 5
[ 122.891] (**) Option "config_info" "devd:sysmouse"
[ 122.891] (II) XINPUT: Adding extended input device "sysmouse" (type:
MOUSE, id 7)
[ 122.891] (**) sysmouse: (accel) keeping acceleration scheme 1
[ 122.891] (**) sysmouse: (accel) acceleration profile 0
[ 122.891] (**) sysmouse: (accel) acceleration factor: 2.000
[ 122.891] (**) sysmouse: (accel) acceleration threshold: 4
[ 122.891] (II) sysmouse: SetupAuto: hw.iftype is 4, hw.model is 0
[ 122.891] (II) sysmouse: SetupAuto: protocol is SysMouse
[ 122.891] (II) config/devd: device /dev/ums0 already opened
[ 123.461] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 123.461] (II) modeset(0): Using EDID range info for horizontal sync
[ 123.461] (II) modeset(0): Using EDID range info for vertical refresh
[ 123.461] (II) modeset(0): Printing DDC gathered Modelines:
[ 123.461] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 123.461] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 123.461] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 123.461] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 123.461] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 123.461] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 123.461] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 123.461] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 123.461] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 123.461] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 123.530] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 123.530] (II) modeset(0): Using hsync ranges from config file
[ 123.530] (II) modeset(0): Using vrefresh ranges from config file
[ 123.530] (II) modeset(0): Printing DDC gathered Modelines:
[ 123.530] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 123.530] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 123.530] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 123.530] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 123.530] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 123.530] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 123.530] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 123.530] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 123.530] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 123.530] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 123.600] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 123.600] (II) modeset(0): Using hsync ranges from config file
[ 123.600] (II) modeset(0): Using vrefresh ranges from config file
[ 123.600] (II) modeset(0): Printing DDC gathered Modelines:
[ 123.600] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 123.600] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 123.600] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 123.600] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 123.600] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 123.600] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 123.600] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 123.600] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 123.600] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 123.600] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 123.668] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 123.668] (II) modeset(0): Using hsync ranges from config file
[ 123.668] (II) modeset(0): Using vrefresh ranges from config file
[ 123.668] (II) modeset(0): Printing DDC gathered Modelines:
[ 123.668] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 123.668] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 123.668] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 123.668] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 123.668] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 123.668] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 123.668] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 123.668] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 123.668] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 123.668] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 124.935] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 124.935] (II) modeset(0): Using hsync ranges from config file
[ 124.935] (II) modeset(0): Using vrefresh ranges from config file
[ 124.935] (II) modeset(0): Printing DDC gathered Modelines:
[ 124.935] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 124.935] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 124.935] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 124.935] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 124.935] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 124.935] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 124.935] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 124.935] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 124.935] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 124.935] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 785.711] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 785.711] (II) modeset(0): Using hsync ranges from config file
[ 785.711] (II) modeset(0): Using vrefresh ranges from config file
[ 785.711] (II) modeset(0): Printing DDC gathered Modelines:
[ 785.711] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 785.711] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 785.711] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 785.711] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 785.711] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 785.711] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 785.711] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 785.711] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 785.711] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 785.711] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 946.328] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 946.328] (II) modeset(0): Using hsync ranges from config file
[ 946.328] (II) modeset(0): Using vrefresh ranges from config file
[ 946.328] (II) modeset(0): Printing DDC gathered Modelines:
[ 946.328] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 946.328] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 946.328] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 946.328] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 946.328] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 946.328] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 946.328] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 946.328] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 946.328] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 946.328] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 970.023] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 970.023] (II) modeset(0): Using hsync ranges from config file
[ 970.023] (II) modeset(0): Using vrefresh ranges from config file
[ 970.023] (II) modeset(0): Printing DDC gathered Modelines:
[ 970.023] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 970.023] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 970.023] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 970.023] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 970.023] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 970.023] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 970.023] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 970.023] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 970.023] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 970.023] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 999.607] (II) modeset(0): EDID vendor "DEL", prod id 16475
[ 999.607] (II) modeset(0): Using hsync ranges from config file
[ 999.607] (II) modeset(0): Using vrefresh ranges from config file
[ 999.607] (II) modeset(0): Printing DDC gathered Modelines:
[ 999.607] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328
1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 999.607] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 999.607] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 999.607] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 999.607] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 999.607] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296
1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 999.607] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 999.607] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 999.607] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 999.607] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 86
Here is log when started with the file
/usr/local/etc/X11/xorg.conf.d/20-amdgpu.conf added:
X.Org X Server 1.18.4
Release Date: 2016-07-19
[ 23.800] X Protocol Version 11, Revision 0
[ 23.800] Build Operating System: FreeBSD 13.0-CURRENT amd64
[ 23.800] Current Operating System: FreeBSD FBSD_13 13.0-CURRENT
FreeBSD 13.0-CURRENT #4 r340626: Mon Nov 19 08:56:38 EST 2018
root@FBSD_13:/usr/obj/usr/src/amd64.amd64/sys/MYKERNEL amd64
[ 23.800] Build Date: 13 November 2018 12:17:41PM
[ 23.800]
[ 23.800] Current version of pixman: 0.34.0
[ 23.800] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.800] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.800] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 19
09:56:36 2018
[ 23.802] (==) Using config directory: "/usr/local/etc/X11/xorg.conf.d"
[ 23.803] (==) No Layout section. Using the first Screen section.
[ 23.803] (==) No screen section available. Using defaults.
[ 23.803] (**) |-->Screen "Default Screen Section" (0)
[ 23.803] (**) | |-->Monitor "<default monitor>"
[ 23.803] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.803] (**) | |-->Device "AMD"
[ 23.803] (==) No monitor specified for screen "Default Screen
Section".
Using a default monitor configuration.
[ 23.803] (==) Automatically adding devices
[ 23.803] (==) Automatically enabling devices
[ 23.803] (==) Not automatically adding GPU devices
[ 23.803] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 23.807] (==) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/
[ 23.807] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[ 23.807] (II) The server relies on devd to provide the list of input
devices.
If no devices become available, reconfigure devd or disable
AutoAddDevices.
[ 23.807] (II) Loader magic: 0x413020
[ 23.807] (II) Module ABI versions:
[ 23.807] X.Org ANSI C Emulation: 0.4
[ 23.807] X.Org Video Driver: 20.0
[ 23.807] X.Org XInput driver : 22.1
[ 23.807] X.Org Server Extension : 9.0
[ 23.807] (--) PCI:*(0:34:0:0) 1002:677b:1043:3021 rev 0, Mem @
0xe0000000/268435456, 0xfe620000/131072, I/O @ 0x0000e000/256, BIOS @
0x????????/65536
[ 23.807] (II) LoadModule: "glx"
[ 23.808] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 23.816] (II) Module glx: vendor="X.Org Foundation"
[ 23.816] compiled for 1.18.4, module version = 1.0.0
[ 23.816] ABI class: X.Org Server Extension, version 9.0
[ 23.816] (==) AIGLX enabled
[ 23.816] (II) LoadModule: "amdgpu"
[ 23.816] (WW) Warning, couldn't open module amdgpu
[ 23.816] (II) UnloadModule: "amdgpu"
[ 23.816] (II) Unloading amdgpu
[ 23.816] (EE) Failed to load module "amdgpu" (module does not exist,
0)
[ 23.816] (EE) No drivers available.
[ 23.816] (EE)
Fatal server error:
[ 23.816] (EE) no screens found(EE)
[ 23.816] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 23.816] (EE) Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[ 23.816] (EE)
[ 23.816] (EE) Server terminated with error (1). Closing log file.
Thanks in advance for reading, any help is appreciated.
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"