Re: Working Video Card: Radeon RX 550

Chris Wells <[email protected]>
Newsgroups gmane.os.freebsd.devel.x11
Message-ID <[email protected]>
Just as a quick update:

I switched from xf86-video-ati to xf86-video-amdgpu.
This card also works with 3 monitors using automatic configuration.

It never displays the login while resuming if I'm logged into KDE and 
the screen locks.  I simply disabled the "lock screen automatically" 
setting to work around it.

Chris

On 4/8/19 9:04 PM, Chris Wells wrote:
> My very old video card finally died today, so I picked up something less 
> old.  It's not on the AMD-GPU-Matrix wiki page, but it does work.  I'm 
> providing hardware info (attached) to document it per the instructions 
> on this page:
> 
> https://wiki.freebsd.org/Graphics#Test_Results
> 
> This is the card:
> 
> https://smile.amazon.com/XFX-AMD-Radeon-Core-RX-550P4SFG5/dp/B071QXB522/
> 
> I'm running KDE from the quarterly pkg branch using a dual-monitor setup 
> with no manual X11 config.  I'll be able to test with 3 monitors when a 
> DisplayPort to HDMI cable arrives in 2 days.
> 
> I have this in loader.conf as instructed on the Graphics page:
> 
> hw.syscons.disable=1
> 
> FYI: I did not set that with my old Radeon HD 5450 card since I didn't 
> know it was "needed," but it worked anyway.  This card appears to 
> require it.
> 
> This is in rc.conf:
> 
> kld_list="/boot/modules/amdgpu.ko"
> 
> The following page lists older hardware as using the amdgpu module via 
> drm-kmod port while others do not say "via the port."  Does that mean 
> that I should NOT use the port?
> 
> https://wiki.freebsd.org/Graphics/AMD-GPU-Matrix
> 
> Two things worth noting:
> 
> 1) The output during boot is garbled, so I have to "guess" when to enter 
> the password for my backup disk.  My guess is that's due to 
> hw.syscons.disable=1 based on the Graphics page.
> 
> 2) Sound isn't working in Firefox anymore, so I'll need to find a fix 
> for that.
> 
> Thanks for all the effort you folks put into this.  It was really nice 
> to pick a somewhat random card, plug it in, and have it work with just a 
> couple of config file updates.
> 
> Chris
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.