Can't run ASPEED AST1180 with xf86-video-ast-1.1.5_3.
KIRIYAMA Kazuhiko <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.x11 |
|---|---|
| Message-ID | <[email protected]> |
Hi, all
I'm working with 13.0-CURRENT on Supermicro A2SDi-16C-HLN4F [1] server which
builtin on bord ASPEED video chip:
root@bk:~ # uname -a
FreeBSD bk.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r356739M: Tue Jan 28 21:49:59 JST 2020 root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64
root@bk:~ # pciconf -lv
:
(snip)
:
pcib4@pci0:3:0:0: class=0x060400 rev=0x03 hdr=0x01 vendor=0x1a03 device=0x1150 subvendor=0x15d9 subdevice=0x0969
vendor = 'ASPEED Technology, Inc.'
device = 'AST1150 PCI-to-PCI Bridge'
class = bridge
subclass = PCI-PCI
vgapci0@pci0:4:0:0: class=0x030000 rev=0x30 hdr=0x00 vendor=0x1a03 device=0x2000 subvendor=0x15d9 subdevice=0x0969
vendor = 'ASPEED Technology, Inc.'
device = 'ASPEED Graphics Family'
class = display
subclass = VGA
I've installed xorg-7.7_3.txz, xf86-video-ast-1.1.5_3.txz and
xterm-353_1.txz. Then xorg.conf setup as follows:
root@bk:~ # Xorg -version
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 13.0-CURRENT amd64
Current Operating System: FreeBSD bk.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r356739M: Tue Jan 28 21:49:59 JST 2020 root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64
Build Date: 13 March 2020 12:30:32PM
Current version of pixman: 0.38.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
root@bk:~ # Xorg -configure
root@bk:~ # cp xorg.conf.new /etc/X11/xorg.conf
root@bk:~ # diff -u xorg.conf.new /etc/X11/xorg.conf
--- xorg.conf.new 2020-03-25 09:32:49.502646000 +0900
+++ /etc/X11/xorg.conf 2020-03-25 09:37:09.245260000 +0900
@@ -1,6 +1,6 @@
Section "ServerLayout"
Identifier "X.org Configured"
- Screen 0 "Screen0" 0 0
+ Screen 0 "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
@@ -53,7 +53,7 @@
#Option "ZaphodHeads" # <str>
#Option "DoubleShadow" # [<bool>]
Identifier "Card0"
- Driver "modesetting"
+ Driver "ast"
BusID "PCI:4:0:0"
EndSection
Then I've run startx, but screen freezed with cursor stop at left up. I
could see runnig X with ASPEED from remote machine:
root@bk:~ # ps -ax
PID TT STAT TIME COMMAND
0 - DLs 0:00.86 [kernel]
1 - ILs 0:00.42 /sbin/init
2 - DL 0:00.00 [crypto]
:
(snip)
:
2315 v0 Is 0:00.02 login [pam] (login)
2349 v0 I 0:00.05 -tcsh (tcsh)
2353 v0 I 0:00.01 su
2354 v0 I 0:00.02 _su (csh)
2356 v0 I+ 0:00.01 /bin/sh /usr/local/bin/startx
2369 v0 I+ 0:00.00 xinit /usr/local/etc/X11/xinit/xinitrc -- /usr/local/bin/X :0 -auth /root/.
2370 v0 R< 23:52.00 /usr/local/bin/Xorg :0 -auth /root/.serverauth.2356
2316 v1 Is+ 0:00.00 /usr/libexec/getty Pc ttyv1
2317 v2 Is+ 0:00.00 /usr/libexec/getty Pc ttyv2
2318 v3 Is+ 0:00.00 /usr/libexec/getty Pc ttyv3
2319 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4
2320 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5
2321 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6
2322 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7
2382 0 Is 0:00.05 -tcsh (tcsh)
2387 0 I 0:00.01 su
2388 0 S 0:00.07 _su (csh)
2545 0 R+ 0:00.00 ps -ax
root@bk:~ # cat /var/log/Xorg.0.log
[ 82.863]
X.Org X Server 1.20.7
X Protocol Version 11, Revision 0
[ 82.863] Build Operating System: FreeBSD 13.0-CURRENT amd64
[ 82.864] Current Operating System: FreeBSD bk.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r356739M: Tue Jan 28 21:49:59 JST 2020 root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64
[ 82.864] Build Date: 13 March 2020 12:30:32PM
[ 82.864]
[ 82.864] Current version of pixman: 0.38.4
[ 82.864] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 82.864] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 82.865] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 09:42:36 2020
[ 82.867] (==) Using config file: "/etc/X11/xorg.conf"
[ 82.867] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[ 82.868] (==) ServerLayout "X.org Configured"
[ 82.868] (**) |-->Screen "Screen0" (0)
[ 82.868] (**) | |-->Monitor "Monitor0"
[ 82.869] (**) | |-->Device "Card0"
[ 82.869] (**) |-->Input Device "Mouse0"
[ 82.869] (**) |-->Input Device "Keyboard0"
[ 82.869] (==) Automatically adding devices
[ 82.869] (==) Automatically enabling devices
[ 82.869] (==) Not automatically adding GPU devices
[ 82.870] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 82.879] (**) FontPath set to:
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d,
/usr/local/share/fonts/misc/,
/usr/local/share/fonts/TTF/,
/usr/local/share/fonts/OTF/,
/usr/local/share/fonts/Type1/,
/usr/local/share/fonts/100dpi/,
/usr/local/share/fonts/75dpi/,
catalogue:/usr/local/etc/X11/fontpath.d
[ 82.879] (**) ModulePath set to "/usr/local/lib/xorg/modules"
[ 82.879] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 82.879] (WW) Disabling Mouse0
[ 82.879] (WW) Disabling Keyboard0
[ 82.879] (II) Loader magic: 0x435010
[ 82.880] (II) Module ABI versions:
[ 82.880] X.Org ANSI C Emulation: 0.4
[ 82.880] X.Org Video Driver: 24.1
[ 82.880] X.Org XInput driver : 24.1
[ 82.880] X.Org Server Extension : 10.0
[ 82.880] (--) PCI:*(4@0:0:0) 1a03:2000:15d9:0969 rev 48, Mem @ 0xde000000/16777216, 0xdf000000/131072, I/O @ 0x0000d000/128, BIOS @ 0x????????/65536
[ 82.881] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 82.881] (II) LoadModule: "glx"
[ 82.883] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[ 82.909] (II) Module glx: vendor="X.Org Foundation"
[ 82.909] compiled for 1.20.7, module version = 1.0.0
[ 82.909] ABI class: X.Org Server Extension, version 10.0
[ 82.909] (II) LoadModule: "ast"
[ 82.910] (II) Loading /usr/local/lib/xorg/modules/drivers/ast_drv.so
[ 82.913] (II) Module ast: vendor="X.Org Foundation"
[ 82.913] compiled for 1.20.7, module version = 1.1.5
[ 82.913] Module class: X.Org Video Driver
[ 82.913] ABI class: X.Org Video Driver, version 24.1
[ 82.913] (II) AST: Driver for ASPEED Graphics Chipsets: ASPEED Graphics Family,
ASPEED Graphics Family, ASPEED AST1180 Graphics
[ 82.914] (--) Using syscons driver with X support (version 2.0)
[ 82.914] (--) using VT number 9
[ 83.265] (WW) Falling back to old probe method for ast
[ 83.265] (--) Chipset ASPEED Graphics Family found
[ 83.265] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 83.265] (II) Loading sub module "vgahw"
[ 83.265] (II) LoadModule: "vgahw"
[ 83.266] (II) Loading /usr/local/lib/xorg/modules/libvgahw.so
[ 83.271] (II) Module vgahw: vendor="X.Org Foundation"
[ 83.271] compiled for 1.20.7, module version = 0.1.0
[ 83.272] ABI class: X.Org Video Driver, version 24.1
[ 83.272] (II) Loading sub module "fb"
[ 83.272] (II) LoadModule: "fb"
[ 83.272] (II) Loading /usr/local/lib/xorg/modules/libfb.so
[ 83.279] (II) Module fb: vendor="X.Org Foundation"
[ 83.279] compiled for 1.20.7, module version = 1.0.0
[ 83.279] ABI class: X.Org ANSI C Emulation, version 0.4
[ 83.279] (==) AST(0): Depth 24, (--) framebuffer bpp 32
[ 83.279] (==) AST(0): Using gamma correction (1.0, 1.0, 1.0)
[ 83.279] (==) AST(0): RGB weight 888
[ 83.279] (==) AST(0): Default visual is TrueColor
[ 83.279] (--) AST(0): Chipset: "ASPEED Graphics Family"
[ 83.279] (II) AST(0): Linear framebuffer at 0xDE000000
[ 83.280] (II) AST(0): IO registers at addr 0xDF000000
What happeds ?
Regards
[1] https://www.supermicro.com/ja/products/motherboard/A2SDi-16C-HLN4F
---
KIRIYAMA Kazuhiko <[email protected]>
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"