Re: Can't run ASPEED AST1180 with xf86-video-ast-1.1.5_3.
Chris <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.x11 |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 24 Mar 2020 22:22:51 -0700 [email protected] said > On Wed, 25 Mar 2020 10:33:07 +0900 KIRIYAMA Kazuhiko [email protected] said > > > Hi, all > > > > I'm working with 13.0-CURRENT on Supermicro A2SDi-16C-HLN4F [1] server which > > builtin on bord ASPEED video chip: > > > > root@bk:~ # uname -a > > FreeBSD bk.truefc.org 13.0-CURRENT FreeBSD 13.0-CURRENT #0 r356739M: Tue Jan > > 28 21:49:59 JST 2020 root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ > > amd64 > > root@bk:~ # pciconf -lv > > : > > (snip) > > : > > pcib4@pci0:3:0:0: class=0x060400 rev=0x03 hdr=0x01 vendor=0x1a03 > > device=0x1150 subvendor=0x15d9 subdevice=0x0969 > > vendor = 'ASPEED Technology, Inc.' > > device = 'AST1150 PCI-to-PCI Bridge' > > class = bridge > > subclass = PCI-PCI > > vgapci0@pci0:4:0:0: class=0x030000 rev=0x30 hdr=0x00 vendor=0x1a03 > > device=0x2000 subvendor=0x15d9 subdevice=0x0969 > > vendor = 'ASPEED Technology, Inc.' > > device = 'ASPEED Graphics Family' > > class = display > > subclass = VGA > > > > I've installed xorg-7.7_3.txz, xf86-video-ast-1.1.5_3.txz and > > xterm-353_1.txz. Then xorg.conf setup as follows: > > > > root@bk:~ # Xorg -version > > > > X.Org X Server 1.20.7 > > X Protocol Version 11, Revision 0 > > Build Operating System: FreeBSD 13.0-CURRENT amd64 > > Current Operating System: FreeBSD bk.truefc.org 13.0-CURRENT FreeBSD > > 13.0-CURRENT #0 r356739M: Tue Jan 28 21:49:59 JST 2020 > > root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64 > > Build Date: 13 March 2020 12:30:32PM > > > > Current version of pixman: 0.38.4 > > Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > root@bk:~ # Xorg -configure > > root@bk:~ # cp xorg.conf.new /etc/X11/xorg.conf > > root@bk:~ # diff -u xorg.conf.new /etc/X11/xorg.conf > > --- xorg.conf.new 2020-03-25 09:32:49.502646000 +0900 > > +++ /etc/X11/xorg.conf 2020-03-25 09:37:09.245260000 +0900 > > @@ -1,6 +1,6 @@ > > Section "ServerLayout" > > Identifier "X.org Configured" > > - Screen 0 "Screen0" 0 0 > > + Screen 0 "Screen0" > > InputDevice "Mouse0" "CorePointer" > > InputDevice "Keyboard0" "CoreKeyboard" > > EndSection > > @@ -53,7 +53,7 @@ > > #Option "ZaphodHeads" # <str> > > #Option "DoubleShadow" # [<bool>] > > Identifier "Card0" > > - Driver "modesetting" > > + Driver "ast" > > BusID "PCI:4:0:0" > > EndSection > > > > Then I've run startx, but screen freezed with cursor stop at left up. I > > could see runnig X with ASPEED from remote machine: > > > > root@bk:~ # ps -ax > > PID TT STAT TIME COMMAND > > 0 - DLs 0:00.86 [kernel] > > 1 - ILs 0:00.42 /sbin/init > > 2 - DL 0:00.00 [crypto] > > : > > (snip) > > : > > 2315 v0 Is 0:00.02 login [pam] (login) > > 2349 v0 I 0:00.05 -tcsh (tcsh) > > 2353 v0 I 0:00.01 su > > 2354 v0 I 0:00.02 _su (csh) > > 2356 v0 I+ 0:00.01 /bin/sh /usr/local/bin/startx > > 2369 v0 I+ 0:00.00 xinit /usr/local/etc/X11/xinit/xinitrc -- > > /usr/local/bin/X :0 -auth /root/. > > 2370 v0 R< 23:52.00 /usr/local/bin/Xorg :0 -auth /root/.serverauth.2356 > > 2316 v1 Is+ 0:00.00 /usr/libexec/getty Pc ttyv1 > > 2317 v2 Is+ 0:00.00 /usr/libexec/getty Pc ttyv2 > > 2318 v3 Is+ 0:00.00 /usr/libexec/getty Pc ttyv3 > > 2319 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4 > > 2320 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5 > > 2321 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6 > > 2322 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7 > > 2382 0 Is 0:00.05 -tcsh (tcsh) > > 2387 0 I 0:00.01 su > > 2388 0 S 0:00.07 _su (csh) > > 2545 0 R+ 0:00.00 ps -ax > > root@bk:~ # cat /var/log/Xorg.0.log > > [ 82.863] > > X.Org X Server 1.20.7 > > X Protocol Version 11, Revision 0 > > [ 82.863] Build Operating System: FreeBSD 13.0-CURRENT amd64 > > [ 82.864] Current Operating System: FreeBSD bk.truefc.org 13.0-CURRENT > > FreeBSD 13.0-CURRENT #0 r356739M: Tue Jan 28 21:49:59 JST 2020 > > root@msrvkx:/usr/obj/usr/src/amd64.amd64/sys/XIJ amd64 > > [ 82.864] Build Date: 13 March 2020 12:30:32PM > > [ 82.864] > > [ 82.864] Current version of pixman: 0.38.4 > > [ 82.864] Before reporting problems, check http://wiki.x.org > > to make sure that you have the latest version. > > [ 82.864] Markers: (--) probed, (**) from config file, (==) default > > setting, > > (++) from command line, (!!) notice, (II) informational, > > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > > [ 82.865] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 25 09:42:36 > > 2020 > > [ 82.867] (==) Using config file: "/etc/X11/xorg.conf" > > [ 82.867] (==) Using system config directory > > "/usr/local/share/X11/xorg.conf.d" > > [ 82.868] (==) ServerLayout "X.org Configured" > > [ 82.868] (**) |-->Screen "Screen0" (0) > > [ 82.868] (**) | |-->Monitor "Monitor0" > > [ 82.869] (**) | |-->Device "Card0" > > [ 82.869] (**) |-->Input Device "Mouse0" > > [ 82.869] (**) |-->Input Device "Keyboard0" > > [ 82.869] (==) Automatically adding devices > > [ 82.869] (==) Automatically enabling devices > > [ 82.869] (==) Not automatically adding GPU devices > > [ 82.870] (==) Max clients allowed: 256, resource mask: 0x1fffff > > [ 82.879] (**) FontPath set to: > > /usr/local/share/fonts/misc/, > > /usr/local/share/fonts/TTF/, > > /usr/local/share/fonts/OTF/, > > /usr/local/share/fonts/Type1/, > > /usr/local/share/fonts/100dpi/, > > /usr/local/share/fonts/75dpi/, > > catalogue:/usr/local/etc/X11/fontpath.d, > > /usr/local/share/fonts/misc/, > > /usr/local/share/fonts/TTF/, > > /usr/local/share/fonts/OTF/, > > /usr/local/share/fonts/Type1/, > > /usr/local/share/fonts/100dpi/, > > /usr/local/share/fonts/75dpi/, > > catalogue:/usr/local/etc/X11/fontpath.d > > [ 82.879] (**) ModulePath set to "/usr/local/lib/xorg/modules" > > [ 82.879] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or > > 'vmmouse' will be disabled. > > [ 82.879] (WW) Disabling Mouse0 > > [ 82.879] (WW) Disabling Keyboard0 > > [ 82.879] (II) Loader magic: 0x435010 > > [ 82.880] (II) Module ABI versions: > > [ 82.880] X.Org ANSI C Emulation: 0.4 > > [ 82.880] X.Org Video Driver: 24.1 > > [ 82.880] X.Org XInput driver : 24.1 > > [ 82.880] X.Org Server Extension : 10.0 > > [ 82.880] (--) PCI:*(4@0:0:0) 1a03:2000:15d9:0969 rev 48, Mem @ > > 0xde000000/16777216, 0xdf000000/131072, I/O @ 0x0000d000/128, BIOS @ > > 0x????????/65536 > > [ 82.881] (II) "glx" will be loaded. This was enabled by default and also > > specified in the config file. > > [ 82.881] (II) LoadModule: "glx" > > [ 82.883] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so > > [ 82.909] (II) Module glx: vendor="X.Org Foundation" > > [ 82.909] compiled for 1.20.7, module version = 1.0.0 > > [ 82.909] ABI class: X.Org Server Extension, version 10.0 > > [ 82.909] (II) LoadModule: "ast" > > [ 82.910] (II) Loading /usr/local/lib/xorg/modules/drivers/ast_drv.so > > [ 82.913] (II) Module ast: vendor="X.Org Foundation" > > [ 82.913] compiled for 1.20.7, module version = 1.1.5 > > [ 82.913] Module class: X.Org Video Driver > > [ 82.913] ABI class: X.Org Video Driver, version 24.1 > > [ 82.913] (II) AST: Driver for ASPEED Graphics Chipsets: ASPEED Graphics > > Family, > > ASPEED Graphics Family, ASPEED AST1180 Graphics > > [ 82.914] (--) Using syscons driver with X support (version 2.0) > > [ 82.914] (--) using VT number 9 > > > > [ 83.265] (WW) Falling back to old probe method for ast > > [ 83.265] (--) Chipset ASPEED Graphics Family found > > [ 83.265] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card > > support > > [ 83.265] (II) Loading sub module "vgahw" > > [ 83.265] (II) LoadModule: "vgahw" > > [ 83.266] (II) Loading /usr/local/lib/xorg/modules/libvgahw.so > > [ 83.271] (II) Module vgahw: vendor="X.Org Foundation" > > [ 83.271] compiled for 1.20.7, module version = 0.1.0 > > [ 83.272] ABI class: X.Org Video Driver, version 24.1 > > [ 83.272] (II) Loading sub module "fb" > > [ 83.272] (II) LoadModule: "fb" > > [ 83.272] (II) Loading /usr/local/lib/xorg/modules/libfb.so > > [ 83.279] (II) Module fb: vendor="X.Org Foundation" > > [ 83.279] compiled for 1.20.7, module version = 1.0.0 > > [ 83.279] ABI class: X.Org ANSI C Emulation, version 0.4 > > [ 83.279] (==) AST(0): Depth 24, (--) framebuffer bpp 32 > > [ 83.279] (==) AST(0): Using gamma correction (1.0, 1.0, 1.0) > > [ 83.279] (==) AST(0): RGB weight 888 > > [ 83.279] (==) AST(0): Default visual is TrueColor > > [ 83.279] (--) AST(0): Chipset: "ASPEED Graphics Family" > > [ 83.279] (II) AST(0): Linear framebuffer at 0xDE000000 > > [ 83.280] (II) AST(0): IO registers at addr 0xDF000000 > > > > What happeds ? > No mouse, or keyboard driver? > I see no evidence of them in your Xorg.log. Probably want to install, > and configure them as needed. :) I'm sorry. Please disregard that. I see them further up. Sorry for the noise. :( > > > > Regards > > > > [1] https://www.supermicro.com/ja/products/motherboard/A2SDi-16C-HLN4F > > > > --- > > KIRIYAMA Kazuhiko <[email protected]> > > _______________________________________________ > > [email protected] mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-x11 > > To unsubscribe, send any mail to "[email protected]" > > > _______________________________________________ > [email protected] mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "[email protected]" _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-x11 To unsubscribe, send any mail to "[email protected]"