drm-*-kmod port for Comet Lake

Kevin Oberman <[email protected]>
Newsgroups gmane.os.freebsd.devel.x11
Message-ID <CAN6yY1ua+6NfMOJS2fBBxoCMh6=ou0FV4fSGBuaQsfON1f32rQ@mail.gmail.com>
I have a new laptop, a ThinkPak L15 with a Comet Lake processor. I quickly
discovered that 12.1 didn't know anything about it, so I reinstalled from
head. Now I need to install the proper kmod and I'm not sure whether I can
use current or if I need devel.

Based on the latest DRM update, I'm pretty sure one of them supports Comet
Lake, but I'm nor sure I can use current orm even if I can, if devel is at
a point where I should just go with it as it sounds like it will soon be
"current".

Or, am I really in trouble and Comet Lake I simply not supported at all?
The symptoms make me suspicious that the device is simply not recognized.

Running current from 9/3 snapshot and latest ports all installed from
packages.

Relevant pciconf Xorg.0.log information:
vgapci0@pci0:0:2:0: class=0x030000 rev=0x04 hdr=0x00 vendor=0x8086
device=0x9bca subvendor=0x17aa subdevice=0x507c
    vendor     = 'Intel Corporation'
    class      = display
    subclass   = VGA

[   523.069] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[   523.070] (II) Loader magic: 0x435290
[   523.070] (II) Module ABI versions:
[   523.070] X.Org ANSI C Emulation: 0.4
[   523.070] X.Org Video Driver: 24.1
[   523.070] X.Org XInput driver : 24.1
[   523.070] X.Org Server Extension : 10.0
[   523.071] (--) PCI:*(0@0:2:0) 8086:9bca:17aa:507c rev 4, Mem @
0xd0000000/16777216, 0xc0000000/268435456, I/O @ 0x00003000/64, BIOS @
0x????????/65536
[   523.072] (II) LoadModule: "glx"
[   523.074] (WW) Warning, couldn't open module glx
[   523.074] (EE) Failed to load module "glx" (module does not exist, 0)
[   523.074] (==) Matched intel as autoconfigured driver 0
[   523.074] (==) Matched modesetting as autoconfigured driver 1
[   523.074] (==) Matched scfb as autoconfigured driver 2
[   523.074] (==) Matched vesa as autoconfigured driver 3
[   523.074] (==) Assigned the driver to the xf86ConfigLayout
[   523.074] (II) LoadModule: "intel"
[   523.074] (WW) Warning, couldn't open module intel
[   523.074] (EE) Failed to load module "intel" (module does not exist, 0)
[   523.074] (II) LoadModule: "modesetting"
[   523.075] (WW) Warning, couldn't open module modesetting
[   523.075] (EE) Failed to load module "modesetting" (module does not
exist, 0)
[   523.075] (II) LoadModule: "scfb"
[   523.075] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so
[   523.075] (II) Module scfb: vendor="X.Org Foundation"
[   523.075] compiled for 1.20.8, module version = 0.0.5
[   523.075] ABI class: X.Org Video Driver, version 24.1
[   523.075] (II) LoadModule: "vesa"
[   523.075] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so
[   523.076] (II) Module vesa: vendor="X.Org Foundation"
[   523.076] compiled for 1.20.8, module version = 2.4.0
[   523.076] Module class: X.Org Video Driver
[   523.076] ABI class: X.Org Video Driver, version 24.1
[   523.076] (II) scfb: driver for wsdisplay framebuffer: scfb
[   523.076] (II) VESA: driver for VESA chipsets: vesa
[   523.076] (--) Using syscons driver with X support (version 2.0)
[   523.076] (--) using VT number 9

[   523.083] (WW) Falling back to old probe method for scfb
[   523.083] scfb trace: probe start
[   523.083] (II) scfb(0): using default device
[   523.083] scfb trace: probe done
[   523.083] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
support
[   523.083] (EE)
Fatal server error:
[   523.083] (EE) Cannot run in framebuffer mode. Please specify busIDs
   for all framebuffer devices
[   523.083] (EE)
[   523.083] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
[   523.083] (EE) Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[   523.083] (EE)
[   523.099] (EE) Server terminated with error (1). Closing log file.
--
Kevin Oberman, Part time kid herder and retired Network Engineer
E-mail: [email protected]
PGP Fingerprint: D03FB98AFA78E3B78C1694B318AB39EF1B055683
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.