Re: GTX 1050Ti can't plugin-play usb devices

On 2020-09-21 08:42, KIRIYAMA Kazuhiko wrote:
> Hi, folks
> 
> I've implemented NVIDIA GTX 1050Ti in Supermicro X11SPM-F
> machine and built up X environment on 13.0-CURRENT
> (r363381). All went right and `startx' successfully done.
> But usb tools could not plugin-played. After pull out usb
> and pull in, keyboard, mouse and usbaudio all were not
> responded. I killed X at remote machine, then all worked
> again. Is there any keybord or mouse device fixed by xorg ?
> 

You need to remove the configuration for keyboard and mouse, and have it 
use libinput instead, to get auto configuration of input devices in X on 
FreeBSD 12.1 and later.

> /etc/X11/xorg.conf:
> # nvidia-xconfig: X configuration file generated by nvidia-xconfig
> # nvidia-xconfig:  version 440.100
> 
> 
> Section "ServerLayout"
>      Identifier     "X.org Configured"
>      Screen      0  "Screen0" 0 0
>      Screen      1  "Screen1" RightOf "Screen0"
>      InputDevice    "Mouse0" "CorePointer"
>      InputDevice    "Keyboard0" "CoreKeyboard"

Remove the two lines above.

> EndSection
> 
> Section "Files"
>      ModulePath      "/usr/local/lib/xorg/modules"
>      FontPath        "/usr/local/share/fonts/misc/"
>      FontPath        "/usr/local/share/fonts/TTF/"
>      FontPath        "/usr/local/share/fonts/OTF/"
>      FontPath        "/usr/local/share/fonts/Type1/"
>      FontPath        "/usr/local/share/fonts/100dpi/"
>      FontPath        "/usr/local/share/fonts/75dpi/"
>      FontPath        "catalogue:/usr/local/etc/X11/fontpath.d"
> EndSection
> 
> Section "Module"
>      Load           "glxserver_nvidia"
>      Load           "glx"
> EndSection
> 
> Section "InputDevice"
>      Identifier     "Keyboard0"
>      Driver         "kbd"
> EndSection
> 
> Section "InputDevice"
>      Identifier     "Mouse0"
>      Driver         "mouse"
>      Option         "Protocol" "auto"
>      Option         "Device" "/dev/sysmouse"
>      Option         "ZAxisMapping" "4 5 6 7"
> EndSection

Remove the two sections above.

> 
> Section "Monitor"
>      Identifier     "Monitor0"
>      VendorName     "Monitor Vendor"
>      ModelName      "Monitor Model"
>      HorizSync       28.0 - 33.0
>      VertRefresh     43.0 - 72.0
>      Option         "DPMS"
> EndSection
> 
> Section "Monitor"
>      Identifier     "Monitor1"
>      VendorName     "Monitor Vendor"
>      ModelName      "Monitor Model"
>      HorizSync       28.0 - 33.0
>      VertRefresh     43.0 - 72.0
>      Option         "DPMS"
> EndSection
> 
> Section "Device"
>      Identifier     "Card0"
>      Driver         "nvidia"
>      BusID          "PCI:101:0:0"
> EndSection
> 
> Section "Device"
> 
>          ### Available Driver options are:-
>          ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>          ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
>          ### <percent>: "<f>%"
>          ### [arg]: arg optional
>          #Option     "SWcursor"           	# [<bool>]
>          #Option     "kmsdev"             	# <str>
>          #Option     "ShadowFB"           	# [<bool>]
>          #Option     "AccelMethod"        	# <str>
>          #Option     "PageFlip"           	# [<bool>]
>          #Option     "ZaphodHeads"        	# <str>
>          #Option     "DoubleShadow"       	# [<bool>]
>          #Option     "Atomic"             	# [<bool>]
>      Identifier     "Card1"
>      Driver         "nvidia"
>      BusID          "PCI:3:0:0"
> EndSection
> 
> Section "Screen"
>      Identifier     "Screen0"
>      Device         "Card0"
>      Monitor        "Monitor0"
>      DefaultDepth    24
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       1
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       4
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       8
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       15
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       16
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       24
> 	Modes	    "1920x1080"
>      EndSubSection
> EndSection
> 
> Section "Screen"
>      Identifier     "Screen1"
>      Device         "Card1"
>      Monitor        "Monitor1"
>      DefaultDepth    24
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       1
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       4
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       8
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       15
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       16
>      EndSubSection
>      SubSection     "Display"
>          Viewport    0 0
>          Depth       24
> 	Modes	    "1920x1080"
>      EndSubSection
> EndSection
> 

Regards
-- 
Niclas

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"