Re: Ryzen3-3200G - graphics
Vasilis Papadiamantopoulos <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.x11 |
|---|---|
| Message-ID | <[email protected]> |
Hi Peter, thank you so much for your time and effort. > On Sep 27, 2020, at 5:45 AM, Peter Jeremy <[email protected]> wrote: > > On 2020-Sep-26 11:16:57 -0400, Vasilis Papadiamantopoulos <[email protected]> wrote: >> I recently built a system with MSI B450 PRO-VDH MAX with a Ryzen-3 3200G with Radeon RX Vega 8 (picasso) [APU]. >> I am running 12.1-RELEASE-p9 > > I've just finished setting up a laptop with a Ryzen 7-3700U (RX Vego 10) > and it's working (though I'm running 13-current and drm-current-kmod). > Possibly you need to use drm-devel-kmod, rather than drm-kmod. Following your message I tried # pkg install drm-devel-kmod but pkg: No package available to install matching 'drm-devel-kmod' have been found in the repositories So I left drm-kmod… (drm-kmod-g20190719) There is one other package called drm-fbsd12.0-kmod-4.16.g20200221 Shall I try this one? It is newer... >> % vi /usr/local/etc/X11/xorg.conf.d/xorg.conf > > This should be unnecessary. I suggest you delete the xorg.conf. I deleted xorg.conf See Xorg.0.log for the EE after startx >> * I tried Driver “amdgpu” > > By default, xorg doesn't include the amdgpu driver. Since you are > loading the amdgpu kernel module, you should have KMS enabled and > xorg should default to using the xorg modesetting driver. > >> The system gave me an ERROR UNSUPPORTED GPU. > > I don't see this message anywhere in the followup you posted. I do see > "Warning, couldn't open module amdgpu" - which is what I'd expect. > >> I assume that as the system doesn’t complain about the amdgpu.ko at boot, after an update I will see my screen flickering while loading the module. >> Now nothing happens when it passes [drm] amdgpu kernel modesetting enabled. > > That [drm] line is expected and should be followed by another ~100 lines > of drm-related output. This information will be in the output from the > "dmesg" command as well as on the console. > > What do you mean by "nothing happens”? As you said, nothing appears under this line. And there is no flickering in my screen as I expected. > If X still doesn't work after you delete xorg.conf, could you please > post your Xorg.0.log and the dmesg output starting with the line: > [drm] amdgpu kernel modesetting enabled. > Xorg.0.log " " “ [ 207.403] X.Org X Server 1.20.8 X Protocol Version 11, Revision 0 [ 207.403] Build Operating System: FreeBSD 12.1-RELEASE-p8 amd64 [ 207.403] Current Operating System: FreeBSD rainbow.mydomain.com 12.1-RELEASE-p9 FreeBSD 12.1-RELEASE-p9 GENERIC amd64 [ 207.403] Build Date: 30 August 2020 05:54:13AM [ 207.403] [ 207.403] Current version of pixman: 0.40.0 [ 207.403] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 207.403] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 207.403] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Sep 27 17:57:35 2020 [ 207.404] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d" [ 207.405] (==) No Layout section. Using the first Screen section. [ 207.405] (==) No screen section available. Using defaults. [ 207.405] (**) |-->Screen "Default Screen Section" (0) [ 207.405] (**) | |-->Monitor "<default monitor>" [ 207.405] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 207.405] (==) Automatically adding devices [ 207.405] (==) Automatically enabling devices [ 207.405] (==) Not automatically adding GPU devices [ 207.405] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 207.408] (==) FontPath set to: /usr/local/share/fonts/misc/, /usr/local/share/fonts/TTF/, /usr/local/share/fonts/OTF/, /usr/local/share/fonts/Type1/, /usr/local/share/fonts/100dpi/, /usr/local/share/fonts/75dpi/, catalogue:/usr/local/etc/X11/fontpath.d [ 207.408] (==) ModulePath set to "/usr/local/lib/xorg/modules" [ 207.408] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 207.408] (II) Loader magic: 0x42e020 [ 207.408] (II) Module ABI versions: [ 207.408] X.Org ANSI C Emulation: 0.4 [ 207.408] X.Org Video Driver: 24.1 [ 207.408] X.Org XInput driver : 24.1 [ 207.408] X.Org Server Extension : 10.0 [ 207.408] (--) PCI:*(41@0:0:0) 1002:15d8:1462:7a38 rev 201, Mem @ 0xe0000000/268435456, 0xf0000000/2097152, 0xfcc00000/524288, I/O @ 0x0000e000/256, BIOS @ 0x????????/65536 [ 207.408] (II) LoadModule: "glx" [ 207.408] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 207.416] (II) Module glx: vendor="X.Org Foundation" [ 207.416] compiled for 1.20.8, module version = 1.0.0 [ 207.416] ABI class: X.Org Server Extension, version 10.0 [ 207.416] (==) Matched ati as autoconfigured driver 0 [ 207.416] (==) Matched modesetting as autoconfigured driver 1 [ 207.416] (==) Matched scfb as autoconfigured driver 2 [ 207.416] (==) Matched vesa as autoconfigured driver 3 [ 207.416] (==) Assigned the driver to the xf86ConfigLayout [ 207.416] (II) LoadModule: "ati" [ 207.416] (WW) Warning, couldn't open module ati [ 207.416] (EE) Failed to load module "ati" (module does not exist, 0) [ 207.416] (II) LoadModule: "modesetting" [ 207.416] (II) Loading /usr/local/lib/xorg/modules/drivers/modesetting_drv.so [ 207.417] (II) Module modesetting: vendor="X.Org Foundation" [ 207.417] compiled for 1.20.8, module version = 1.20.8 [ 207.417] Module class: X.Org Video Driver [ 207.417] ABI class: X.Org Video Driver, version 24.1 [ 207.417] (II) LoadModule: "scfb" [ 207.417] (II) Loading /usr/local/lib/xorg/modules/drivers/scfb_drv.so [ 207.417] (II) Module scfb: vendor="X.Org Foundation" [ 207.417] compiled for 1.20.8, module version = 0.0.5 [ 207.417] ABI class: X.Org Video Driver, version 24.1 [ 207.417] (II) LoadModule: "vesa" [ 207.417] (II) Loading /usr/local/lib/xorg/modules/drivers/vesa_drv.so [ 207.418] (II) Module vesa: vendor="X.Org Foundation" [ 207.418] compiled for 1.20.8, module version = 2.4.0 [ 207.418] Module class: X.Org Video Driver [ 207.418] ABI class: X.Org Video Driver, version 24.1 [ 207.418] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 207.418] (II) scfb: driver for wsdisplay framebuffer: scfb [ 207.418] (II) VESA: driver for VESA chipsets: vesa [ 207.418] (--) Using syscons driver with X support (version 2.0) [ 207.418] (--) using VT number 9 [ 207.418] (EE) open /dev/dri/card0: No such file or directory [ 207.418] (WW) Falling back to old probe method for modesetting [ 207.418] (EE) open /dev/dri/card0: No such file or directory [ 207.418] (WW) Falling back to old probe method for scfb [ 207.418] scfb trace: probe start [ 207.418] (II) scfb(1): using default device [ 207.418] scfb trace: probe done [ 207.418] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 207.418] (EE) Screen 0 deleted because of no matching config section. [ 207.418] (II) UnloadModule: "modesetting" [ 207.418] (EE) Fatal server error: [ 207.418] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices [ 207.418] (EE) [ 207.418] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 207.418] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 207.418] (EE) [ 207.418] (EE) Server terminated with error (1). Closing log file. " “ " > dmesg " " “ [drm] amdgpu kernel modesetting enabled. lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 ums0 on uhub3 ums0: <Mitsumi Electric Apple Optical USB Mouse, class 0/0, rev 1.10/1.08, addr 2> on usbus0 ums0: 4 buttons and [XYZW] coordinates ID=0 uhid0 on uhub3 uhid0: <Chicony Apple Extended USB Keyboard, class 0/0, rev 1.10/4.00, addr 3> on usbus0 " “ “ Thank you again for your help. Best, Vasilis Papadiamantopoulos, PhD _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-x11 To unsubscribe, send any mail to "[email protected]"