I can not get xorg to start

At this point I think I am more looking for guidance than thinking there is 
any combination that is going to work with this system. Never the less, I 
have the following setup:

vgapci1@pci0:0:2:0:     class=0x030000 card=0x380a17aa chip=0x191b8086 
rev=0x06 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = 'HD Graphics 530'
     class      = display
--
vgapci0@pci0:1:0:0:     class=0x030200 card=0x380b17aa chip=0x134710de 
rev=0xa2 hdr=0x00
     vendor     = 'NVIDIA Corporation'
     device     = 'GM108M [GeForce 940M]'
     class      = display

Packages
    xf86-video-intel-2.99.917.914,1
    xf86-video-scfb-0.0.5_2
    xf86-video-vesa-2.5.
    xorg-7.7_3
    drm-fbsd11.2-kmod-4.11g20200420
    drm-kmod-g20190710

In /usr/local/etc/X11/xorg.conf.d
    driver-intel.conf
       Section "Device"
         Identifier "Card0"
         Driver     "intel"
         BusID      "PCI:0:2:0"
       EndSection

    screen-resolution.conf
       Section "Screen"
         Identifier "Screen0"
         Device     "Card0"
         SubSection "Display"
         Modes      "1920x1080"
         EndSubSection
    EndSection

startx yields
    [224.924] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
    [224.951] (==) No Layout section.  Using the first Screen section.
    [224.951] (**) |-->Screen "Screen0" (0)
    [224.952] (**) ||-->Monitor "<default monitor>"
    [224.952] (**) ||-->Device "Card0"
    [224.952] (==) No monitor specified for screen "Screen0".
   Using a default monitor configuration.

I take this to mean I did neither file correctly

    [225.032] (--) PCI:*(0@0:2:0) 8086:191b:17aa:380a rev 6, Mem @ 
0xd0000000/16777216, 0xc0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 
0x????????/65536
    [225.032] (--) PCI: (1@0:0:0) 10de:1347:17aa:380b rev 162, Mem @ 
0xd1000000/16777216, 0xa0000000/268435456, 0xb0000000/33554432, I/O @ 
0x0000d000/128

    [225.032] (II) LoadModule: "glx"
    [225.033] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
    [225.143] (II) Module glx: vendor="X.Org Foundation"
    [225.143]    compiled for 1.20.9, module version = 1.0.0
    [225.143]    ABI class: X.Org Server Extension, version 10.0
    [225.143] (II) LoadModule: "intel"
    [225.143] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
    [225.233] (II) Module intel: vendor="X.Org Foundation"
    [225.233]    compiled for 1.20.9, module version = 2.99.917
    [225.233]    Module class: X.Org Video Driver
    [225.233]    ABI class: X.Org Video Driver, version 24.1
    [225.235] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
         i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
         915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
         Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
         GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [225.246] (II) intel: Driver for Intel(R) HD Graphics
    [225.246] (II) intel: Driver for Intel(R) Iris(TM) Graphics
    [225.246] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
    [225.246] (--) Using syscons driver with X support (version 2.0)
    [225.246] (--) using VT number 9

    [225.538] (EE) No devices detected.
    [225.538] (EE)

I also have tried just starting with no configuration and with 'Xorg 
-configure' as well as the above. All yield similar errors. I also 
installed nvidia-driver-440.100_1 and tried running in Linux mode. I would 
not think this would work as the 11.4/12.2 hardware notes do not list the 
GM108M [GeForce 940M] as being supported. I found a post on the forum that 
specifically said it was not.

All the above is really background for my questions: (1) Hopefully I did 
the conf files incorrectly (2) I had to configure this system as a legacy 
BIOS boot. Does that matter? (3) Is my best course to wait for 7.7_4 or 
beyond. (4) I can use this system as a test server of course. But what have 
I missed (in general)?

I am quite lost any thing else to try or another course of action would be 
greatly appreciated.


_____
Douglas Denault
http://www.safeport.com
[email protected]
Voice: 301-217-9220
   Fax: 301-217-9277
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-x11
To unsubscribe, send any mail to "[email protected]"