Re: drm-kmod-20220907_2 not supported for this configuration / NVIDIA : Failed to initialize the NVIDIA kernel module

It persists installing nvidia-driver-535.146.02,but I suspect that it is
too now for FreeBSD 13.1.

On Sat, Feb 24, 2024 at 2:46 PM Mario Marietto <[email protected]>
wrote:

> :(
>
> KLD nvidia.ko : depends on kernel. Not available or version mismatch
> linker_load_file : /boot/modules/nvidia.ko : unsupported file type.
>
> Can you give me your "nvidia.ko" file ? thanks.
>
> On Sat, Feb 24, 2024 at 3:09 PM Simon Gusev <[email protected]> wrote:
>
>>
>> Hello Mario.
>>
>> I have problem too.
>> A few days i try solve the same problem.
>> Alone was a very difficult, but solved it.
>>
>> Try this.
>>
>> Remove all drm and clear.
>>
>>
>> Try steps below.
>>
>> Install this
>> pkg ins nvidia-xconfig
>>
>> pkg ins nvidia-driver - you card driver select
>>
>> pkg ins nvidia-drm - use pkg search and select your variant version
>> But drm not needed for nvidia
>>
>> After instal
>> nvidia-xconfig - will create Xorg conf file
>>
>> Start and load
>> dbus
>> kldload nvidia
>>
>> Try xfce or KDE
>>
>> Best,
>> Simon )
>>
>> - - -
>>
>>
>> -------- Исходное сообщение --------
>> От: Mario Marietto <[email protected]>
>> Дата: 24.02.2024 16:38 (GMT+03:00)
>> Кому: FreeBSD virtualization <[email protected]>,
>> FreeBSD Mailing List <[email protected]>, freebsd-hackers <
>> [email protected]>, [email protected],
>> [email protected], Ronald Klop <[email protected]>, Jake
>> Freeland <[email protected]>
>> Тема: drm-kmod-20220907_2 not supported for this configuration / NVIDIA :
>> Failed to initialize the NVIDIA kernel module
>>
>> Hello to everyone.
>>
>> I need to conduct some tests on top of the FreeBSD 13.1.
>> So,I've installed it on one of my disks. I've installed xfce4 and
>> KDE,Xorg and from the ports (after having upgraded them),I've installed the
>> nvidia-driver version. 535.146.02 ; I didn't have any problem.
>>
>> The problem arises when I tried to install the package drm-kmod from
>> ports.
>>
>> Unfortunately I'm not able to compile it. This is what happened :
>>
>> root@marietto:/usr/ports/graphics/drm-kmod # make
>> ====> drm-kmod-20220907_2 not supported for this configuration.
>>
>> ok. At this point I tried to install it from the packages :
>>
>> root@marietto:/usr/ports/graphics/drm-kmod # make clean
>> ====> cleaning for drm-kmod-20220907_2
>>
>> so :
>>
>> root@marietto:/usr/ports/graphics/drm-kmod # pkg install drm-kmod
>>
>> New packages to be INSTALLED :
>> drm-kmod: 20220907_2
>> OK
>>
>> now,I have performed additional configuration to :
>>
>> nano /home/marietto/.xinitrc :
>>
>> exec ck-launch-session dbus-launch --exit-with-session startxfce4
>>
>> nano /etc/rc.conf :
>>
>> kdm5_enable="YES"
>> dbus_enable="YES"
>> hald_enable="YES"
>> kld_list="nvidia nvidia-modeset"
>> rpcbind_enable="YES"
>> dtcms_enable="YES"
>> inetd_enable="YES"
>>
>> nano /boot/loader.conf
>>
>> vmm_load="YES"
>> nmdm_load="YES"
>> tmpfs_load="YES"
>> cryptodev_load="YES"
>> zfs_load="YES"
>> kern.racct.enable="1"
>> kern.vty=vt
>> kern.cam.scsi_delay="10000"
>>
>> nano /etc/X11/xorg.conf
>>
>> Section "Device"
>>                Identifier   "Card0"
>>                Driver         "nvidia"
>>                BusID          "PCI:1:0:0"
>> EndSection
>>
>>
>> root@marietto:/home/marietto # lspci
>>
>> 01:00.0 NVIDIA GP106
>> 01:00.1 NVIDIA GP106 High Definition Audio Controller
>> 02:00.0 NVIDIA TU102
>> 02:00.1 NVIDIA TU102 High Definition Audio Controller
>> 02:00.2 NVIDIA TU102 USB Controller
>> 02:00.3 NVIDIA TU102 Serial BUS Controller
>>
>> Now,I want to startx to start xfce4 :
>>
>> marietto@marietto: $ startx
>>
>> Fatal server error : no screens found (EE)
>> Check the log file at "/var/log/Xorg.0.log"
>>
>> nano /var/log/Xorg.0.log :
>>
>> NVIDIA dlloader X driver 535.146.02
>> NVIDIA Unified Driver for all Supported NVIDIA gpus
>> NVIDIA : Failed to initialize the NVIDIA kernel module
>>
>> How to fix it ?
>>
>> --
>> Mario.
>>
>
>
> --
> Mario.
>


-- 
Mario.