[Bug 287389] graphics/drm-61-kmod: GPU hang

[email protected]
Newsgroups gmane.os.freebsd.devel.x11
Message-ID <[email protected]/bugzilla/>
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=287389

--- Comment #2 from Pero Oršolić <[email protected]> ---
Happened again. This time I was trying to play video file with mpv.
Again both monitors lost picture for 1-2 seconds, after that DP monitor is all
black, HDMI monitor show picture which should be on DP.
Trying to kill Xorg return success but process is not killed.
ps aux | grep Xorg
root       40477    0.0  0.0       0     16  -  DE   Thu16      32:31.68
/usr/local/libexec/Xorg -nolisten tcp vt09 -auth /var/run/slim.auth
Uptime is 4 days, but few hours after the reboot I am staring to experience GUI
slowdowns. System was sluggish before freeze.

Dmesg:
[drm ERROR :amdgpu_job_timedout] ring gfx timeout, signaled seq=24277354,
emitted seq=24277356
[drm ERROR :amdgpu_job_timedout] Process information: process  pid 666259
thread  pid 666259
drmn0: GPU reset begin!
[drm] psp gfx command UNLOAD_TA(0x2) failed and response status is (0x117)
drmn0: free PSP TMR buffer
drmn0: MODE2 reset
drmn0: GPU reset succeeded, trying to resume
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F43FC00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf43f800000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
drmn0: SMU is resuming...
drmn0: SMU is resumed successfully!
[drm] DMUB hardware initialized: version=0x01010027
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_dec uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 1
drmn0: [drm] *ERROR* drmn0: [drm] *ERROR* drmn0: ib ring test failed (-60).
drmn0: free PSP TMR buffer
drmn0: MODE2 reset
drmn0: GPU reset succeeded, trying to resume
[drm] PCIE GART of 1024M enabled.
[drm] PTB located at 0x000000F43FC00000
[drm] PSP is resuming...
[drm] reserve 0x400000 from 0xf43f800000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
drmn0: SMU is resuming...
drmn0: SMU is resumed successfully!
[drm] DMUB hardware initialized: version=0x01010027
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
drmn0: ring gfx uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_dec uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc0 uses VM inv eng 4 on hub 1
drmn0: ring vcn_enc1 uses VM inv eng 5 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 6 on hub 1
drmn0: recover vram bo from shadow start
drmn0: recover vram bo from shadow done
drmn0: GPU reset(2) succeeded!
[drm ERROR :amdgpu_job_timedout] ring gfx timeout, signaled seq=24277358,
emitted seq=24277358
[drm ERROR :amdgpu_job_timedout] Process information: process  pid 666259
thread  pid 666259
drmn0: GPU reset begin!

-- 
You are receiving this mail because:
You are the assignee for the bug.
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.