Bugzilla Automation <[email protected]> has asked freebsd-x11 (Nobody)
<[email protected]> for maintainer-feedback:
Bug 289921: graphics/drm-61-kmod: amdgpu freezes on RX 7800 XT with FreeBSD
14.3
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=289921
--- Description ---
On FreeBSD 14.3-RELEASE-p3 with graphics/drm-61-kmod, the system experiences
frequent GPU resets and amdgpu job timeouts on a Radeon RX 7800 XT. The problem
occurs during regular desktop usage (sway, Firefox, bunch of terminals).
System:
```
% uname -a
FreeBSD chrostik 14.3-RELEASE-p3 FreeBSD 14.3-RELEASE-p3 GENERIC amd64
% pkg info drm-61-kmod
drm-61-kmod-6.1.128.1403000_6
Name : drm-61-kmod
Version : 6.1.128.1403000_6
Installed on : Mon Sep 29 18:03:22 2025 CEST
Origin : graphics/drm-61-kmod
Architecture : FreeBSD:14:amd64
Categories : graphics kld
Maintainer : [email protected]
WWW : https://github.com/freebsd/drm-kmod/
Comment : DRM drivers modules
Annotations :
FreeBSD_version: 1403000
Flat size : 16.9MiB
Description :
amdgpu, i915, and radeon DRM drivers modules.
Currently corresponding to Linux 6.1 DRM.
This version is for FreeBSD 14-STABLE 1400508
and above.
% pciconf -lv | grep -B3 -A1 display
vgapci0@pci0:3:0:0: class=0x030000 rev=0xc8 hdr=0x00 vendor=0x1002
device=0x747e subvendor=0x1da2 subdevice=0xd475
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Navi 32 [Radeon RX 7700 XT / 7800 XT]'
class = display
subclass = VGA
```
dmesg:
```
[drm ERROR :amdgpu_job_timedout] ring sdma1 timeout, signaled seq=50646,
emitted seq=50648
[drm ERROR :amdgpu_job_timedout] Process information: process pid 0 thread
pid 0
drmn0: GPU reset begin!
drmn0: free PSP TMR buffer
drmn0: MODE1 reset
drmn0: GPU mode1 reset
drmn0: GPU smu mode1 reset
drmn0: GPU reset succeeded, trying to resume
[drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
[drm] VRAM is lost due to GPU reset!
[drm] PSP is resuming...
[drm] reserve 0xa700000 from 0x83e0000000 for PSP TMR
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
drmn0: SMU is resuming...
drmn0: smu driver if version = 0x00000032, smu fw if version = 0x0000003f, smu
fw program = 0, smu fw version = 0x00503400 (80.52.0)
drmn0: SMU driver if version not matched
drmn0: SMU is resumed successfully!
[drm] DMUB hardware initialized: version=0x07001900
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:96
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:104
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:112
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:120
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:96
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:104
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:112
[drm] REG_WAIT timeout 1us * 1000 tries - dcn32_dsc_pg_control line:120
[drm] kiq ring mec 3 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
drmn0: [drm] jpeg_v4_0_hw_initdrmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 10 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 12 on hub 0
drmn0: ring sdma1 uses VM inv eng 13 on hub 0
drmn0: ring vcn_unified_0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_unified_1 uses VM inv eng 1 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 4 on hub 1
drmn0: ring mes_kiq_3.1.0 uses VM inv eng 14 on hub 0
drmn0: recover vram bo from shadow start
drmn0: recover vram bo from shadow done
drmn0: GPU reset(1) succeeded!
[drm ERROR :amdgpu_job_timedout] ring sdma1 timeout, signaled seq=50649,
emitted seq=50649
[drm ERROR :amdgpu_job_timedout] Process information: process pid 0 thread
pid 0
drmn0: GPU reset begin!
```
No overclocking, all updated. Recent UEFI. ASUS ROG STRIX X870 E-GAMING + Ryzen
7900.
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.