[Bug 291887] graphics/drm-latest-kmod graphics/gpu-firmware-intel: add support for Arrow Lake-P [Arc Pro 130T/140T]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=291887

--- Comment #1 from [email protected] ---

dmesg upon kldload i915kms
[drm] Got Intel graphics stolen memory base 0x0, size 0x0
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
drmn0: [drm] GT0: Incompatible option enable_guc=-1 - undocumented flag
drmn0: [drm] GT1: Incompatible option enable_guc=-1 - undocumented flag
drmn0: [drm] *ERROR* Unexpected child device config size 40 (expected 39 for
VBT version 261)
i915/mtl_dmc.bin: could not load binary firmware
/boot/firmware/i915/mtl_dmc.bin either
mtl_dmc.bin: could not load binary firmware /boot/firmware/mtl_dmc.bin either
i915_mtl_dmc.bin: could not load binary firmware
/boot/firmware/i915_mtl_dmc.bin either
drmn0: successfully loaded firmware image 'i915/mtl_dmc.bin'
drmn0: [drm] Finished loading DMC firmware i915/mtl_dmc.bin (v2.23)
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic0
iic2: <I2C generic I/O> on iicbus2
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic1
iic3: <I2C generic I/O> on iicbus3
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic2
iic4: <I2C generic I/O> on iicbus4
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic3
iic5: <I2C generic I/O> on iicbus5
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic4
iic6: <I2C generic I/O> on iicbus6
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus7: <Philips I2C bus> on lkpi_iic5
iic7: <I2C generic I/O> on iicbus7
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus8: <Philips I2C bus> on lkpi_iic6
iic8: <I2C generic I/O> on iicbus8
lkpi_iic7: <LinuxKPI I2C> on drmn0
iicbus9: <Philips I2C bus> on lkpi_iic7
iic9: <I2C generic I/O> on iicbus9
lkpi_iic8: <LinuxKPI I2C> on drmn0
iicbus10: <Philips I2C bus> on lkpi_iic8
iic10: <I2C generic I/O> on iicbus10
i915/mtl_guc_70.bin: could not load binary firmware
/boot/firmware/i915/mtl_guc_70.bin either
mtl_guc_70.bin: could not load binary firmware /boot/firmware/mtl_guc_70.bin
either
i915_mtl_guc_70.bin: could not load binary firmware
/boot/firmware/i915_mtl_guc_70.bin either
drmn0: successfully loaded firmware image 'i915/mtl_guc_70.bin'
i915/mtl_guc_70.bin: could not load binary firmware
/boot/firmware/i915/mtl_guc_70.bin either
mtl_guc_70.bin: could not load binary firmware /boot/firmware/mtl_guc_70.bin
either
i915_mtl_guc_70.bin: could not load binary firmware
/boot/firmware/i915_mtl_guc_70.bin either
drmn0: successfully loaded firmware image 'i915/mtl_guc_70.bin'
i915/mtl_huc_gsc.bin: could not load binary firmware
/boot/firmware/i915/mtl_huc_gsc.bin either
mtl_huc_gsc.bin: could not load binary firmware /boot/firmware/mtl_huc_gsc.bin
either
i915_mtl_huc_gsc.bin: could not load binary firmware
/boot/firmware/i915_mtl_huc_gsc.bin either
drmn0: successfully loaded firmware image 'i915/mtl_huc_gsc.bin'
i915/mtl_gsc_1.bin: could not load binary firmware
/boot/firmware/i915/mtl_gsc_1.bin either
mtl_gsc_1.bin: could not load binary firmware /boot/firmware/mtl_gsc_1.bin
either
i915_mtl_gsc_1.bin: could not load binary firmware
/boot/firmware/i915_mtl_gsc_1.bin either
drmn0: successfully loaded firmware image 'i915/mtl_gsc_1.bin'
drmn0: [drm] GT0: GuC firmware i915/mtl_guc_70.bin version 70.36.0
drmn0: [drm] GT0: GUC: submission enabled
drmn0: [drm] GT0: GUC: SLPC enabled
drmn0: [drm] GT0: GUC: RC enabled
drmn0: [drm:0xffffffff83d3e740s] 0xfffffe01becfb7e8Vsysctl_add_oid: can't
re-use a leaf (hw.dri.debug)!
lkpi_iic9: <LinuxKPI I2C> on drm1
iicbus11: <Philips I2C bus> on lkpi_iic9
iic11: <I2C generic I/O> on iicbus11
lkpi_iic10: <LinuxKPI I2C> on drm2
iicbus12: <Philips I2C bus> on lkpi_iic10
iic12: <I2C generic I/O> on iicbus12
lkpi_iic11: <LinuxKPI I2C> on drm3
iicbus13: <Philips I2C bus> on lkpi_iic11
iic13: <I2C generic I/O> on iicbus13
lkpi_iic12: <LinuxKPI I2C> on drm5
iicbus14: <Philips I2C bus> on lkpi_iic12
iic14: <I2C generic I/O> on iicbus14
[drm] Initialized i915 1.6.0 20230929 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
start FB_INFO:
height=1200 width=1920 depth=32
pbase=0x70800000 vbase=0xfffff80070800000
name=drmn0 id=i915drmfb flags=0x0 stride=7680
end FB_INFO

And the log message on startx, 
drmn0: [drm] *ERROR* [CRTC:80:pipe A] DSB 0 timed out waiting for idle (current
head=0x5c0, head=0x0, tail=0x880)


John
[email protected]

-- 
You are receiving this mail because:
You are the assignee for the bug.