chiavetta internet ed ppp.conf

Un cordiale saluto a tutti,

il problema del giorno e' la configurazione di una chiavetta huawei e1692
su un notebook con pcbsd10 per un amico (grande fonte di problemi gli
amici).

Mi sono rifatto a quanto spiegato in questa guida:
http://www.snip2code.com/Snippet/31996/How-to-set-up-a-Huawei-E1820-3G-modem-on

quindi:
1) kldload u3g
2) installate le usbutils
3) recuperate vendor_id e product_id
4) creato /etc/devd/huawei-e1692.conf
5) identificato il nome del modem
6) configurato ppp.conf
7) start del ppp

Non funziona (ovviamente, altrimenti non sarei qui)

Allego i tracciati ed i log dell'attivita' svolta
Qualcuno riesce a capire cosa ho sbagliato?

Grazie
Franco


[filippo@pcbsd-7803] /usr/home/filippo# lsusb
Bus /dev/usb Device /dev/ugen0.2: ID 12d1:140c Huawei Technologies Co.,
Ltd.


[filippo@pcbsd-7803] /usr/home/filippo# less /etc/devd/huawei-e1692.conf
attach 100 {
        device-name "u3g[0-9]+";
        match "vendor" "0x12d1";
        match "product" "0x140c";
        action "/usr/sbin/ppp -ddial ibox.tim.it";
};

[filippo@pcbsd-7803] /usr/home/filippo# sysctl -a dev.u3g
dev.u3g.0.%desc: HUAWEI Technology HUAWEI Mobile, class 0/0, rev 2.00/0.00,
addr 1
dev.u3g.0.%driver: u3g
dev.u3g.0.%location: bus=1 hubaddr=1 port=0 devaddr=2 interface=0
dev.u3g.0.%pnpinfo: vendor=0x12d1 product=0x140c devclass=0x00
devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0xff
intsubclass=0xff intprotocol=0xff  ttyname=U0 ttyports=4
dev.u3g.0.%parent: uhub1
dev.u3g.0.ttyname: U0
dev.u3g.0.ttyports: 4
[filippo@pcbsd-7803] /usr/home/filippo#


[filippo@pcbsd-7803] /usr/home/filippo# less /etc/ppp/ppp.conf
default:

ibox.tim.it:
 set device /dev/cuaU0.0
 set timeout 0
 set dial "ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5 \
        \"\" \
        ATOK-AT-OK \
        AT+CPIN=0000 OK-AT-OK \
        ATH OK-AT-OK \
        ATE1 OK-AT-OK \
        AT+CGDCONT=1,\\"IP\\",\\"ibox.tim.it\\" OK \
        \dATD*99# TIMEOUT 40 CONNECT"
 enable dns
 resolv writable
 #use google
 set dns 8.8.8.8 4.2.2.4
 set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0
[filippo@pcbsd-7803] /usr/home/filippo#


[filippo@pcbsd-7803] /usr/home/filippo# /usr/sbin/ppp -ddial ibox.tim.it
Working in ddial mode
Using interface: tun3
[filippo@pcbsd-7803] /usr/home/filippo#

[filippo@pcbsd-7803] /usr/home/filippo# ifconfig tun3
tun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
        options=80000<LINKSTATE>
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        Opened by PID 35045
[filippo@pcbsd-7803] /usr/home/filippo#


Mar 12 15:07:08 pcbsd-7803 ppp[32950]: Phase: deflink: Connected!
Mar 12 15:07:08 pcbsd-7803 ppp[32950]: Phase: deflink: opening -> dial
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Warning: Chat script failed
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: dial -> hangup
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: Disconnected!
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: Connect time: 5
secs: 0 octets in, 0 octets out
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: 0 packets in, 0
packets out
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase:  total 0 bytes/sec, peak 0
bytes/sec on Wed Mar 12 15:07:08 2014
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: hangup -> opening
Mar 12 15:07:13 pcbsd-7803 ppp[32950]: Phase: deflink: Enter pause (30) for
redialing.
Mar 12 15:07:20 pcbsd-7803 ppp[32882]: Phase: deflink: Connected!
Mar 12 15:07:20 pcbsd-7803 ppp[32882]: Phase: deflink: opening -> dial
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Warning: Chat script failed
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: dial -> hangup
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: Disconnected!
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: Connect time: 5
secs: 0 octets in, 0 octets out
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: 0 packets in, 0
packets out
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase:  total 0 bytes/sec, peak 0
bytes/sec on Wed Mar 12 15:07:20 2014
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: hangup -> opening
Mar 12 15:07:25 pcbsd-7803 ppp[32882]: Phase: deflink: Enter pause (30) for
redialing.
Mar 12 15:07:27 pcbsd-7803 ppp[35045]: Phase: deflink: Connected!
Mar 12 15:07:27 pcbsd-7803 ppp[35045]: Phase: deflink: opening -> dial
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Warning: Chat script failed
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: dial -> hangup
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: Disconnected!
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: Connect time: 5
secs: 0 octets in, 0 octets out
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: 0 packets in, 0
packets out
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase:  total 0 bytes/sec, peak 0
bytes/sec on Wed Mar 12 15:07:27 2014
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: hangup -> opening
Mar 12 15:07:32 pcbsd-7803 ppp[35045]: Phase: deflink: Enter pause (30) for
redialing.

_______________________________________________
Aiuto mailing list
[email protected]
http://mailman.gufi.org/mailman/listinfo/aiuto