Datemi un cavo e vi connetto il mondo

# kldload if_cdce.ko
# tail /var/log/messages

May 24 21:59:17 brick kernel: ugen0.2: <AVM> at usbus0
May 24 21:59:17 brick kernel: cdce0: <AVM USB DSL Device, class 2/6, rev 1.10/1.00, addr 2> on usbus0
May 24 21:59:18 brick root: Unknown USB device: vendor 0x057c product 0x4201 bus uhub0
May 24 21:59:18 brick kernel: ue0: <USB Ethernet> on cdce0
May 24 21:59:18 brick kernel: ue0: Ethernet address: 00:04:0e:b6:a5:56

# usbconfig show_ifdrv 
ugen0.2: <USB DSL Device AVM> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen0.2.0: cdce0: <AVM USB DSL Device, class 2/6, rev 1.10/1.00, addr 2>

# dhclient ue0

May 24 22:02:05 brick dhclient: New IP Address (ue0): 192.168.179.128
May 24 22:02:05 brick dhclient: New Subnet Mask (ue0): 255.255.255.0
May 24 22:02:05 brick dhclient: New Broadcast Address (ue0): 192.168.179.255
May 24 22:02:05 brick dhclient: New Routers (ue0): 192.168.179.1

# ifconfig ue0
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:04:0e:b6:a5:56
        inet 192.168.179.128 netmask 0xffffff00 broadcast 192.168.179.255

# ping -c3 192.168.179.1
PING 192.168.179.1 (192.168.179.1): 56 data bytes
64 bytes from 192.168.179.1: icmp_seq=0 ttl=255 time=1.569 ms
64 bytes from 192.168.179.1: icmp_seq=1 ttl=255 time=1.999 ms
64 bytes from 192.168.179.1: icmp_seq=2 ttl=255 time=1.919 ms

--- 192.168.179.1 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 1.569/1.829/1.999/0.187 ms


PS: Se non fosse chiaro ho attaccato un cavo USB A-B tra il router
    Fritz! e il server 8.2...  Spettacolo!

Qualcuno dira`: ma perche` tutto cio`?  Il nuovo server ha una lan sola  :(


-- 
Riccardo. ( http://www.GUFI.org/~vic/ )

_______________________________________________
Varie mailing list
[email protected]
http://mailman.gufi.org/mailman/listinfo/varie