Reboot (autoboot) weirdness 15.1p2

kit <[email protected]>
Newsgroups gmane.os.freebsd.questions
Message-ID <[email protected]> 
Hello

I've just acquired a couple of GMKtec nucs,  which are working well 
enough for my purposes, but won't autoboot after a reboot command or a 
shutdown -r.

Autoboot seems to work fine after and actual physical power off, 
sometimes after Ctrl-Alt_Del. If I add
autoboot_delay=4
  to /boot/loader.conf I get an automatic boot with no noticeable delay.
autoboot_delay of 40 gives me 35 second countdown and 20 gives me 15, so 
I some how seem to be losing the time it takes to reboot.

I don't think that this is expected behaviour, but maybe?

  kit@sabrina:~ $ freebsd-version -kru
15.1-RELEASE-p2
15.1-RELEASE-p2
15.1-RELEASE-p2
dmesg attached
dmesg.sabrina.20260823.txt (text/plain, 9.8 KB) 
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.1-RELEASE-p2 releng/15.1-n283596-aadd58dddcbc GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 800x600
CPU: AMD Ryzen 5 7640HS w/ Radeon 760M Graphics      (4292.12-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0xa70f41  Family=0x19  Model=0x74  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
  Structured Extended Features=0xf1bf97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,AVX512F,AVX512DQ,RDSEED,ADX,SMAP,AVX512IFMA,CLFLUSHOPT,CLWB,AVX512CD,SHA,AVX512BW,AVX512VL>
  Structured Extended Features2=0x405fde<AVX512VBMI,UMIP,PKU,OSPKE,AVX512VBMI2,GFNI,VAES,VPCLMULQDQ,AVX512VNNI,AVX512BITALG,AVX512VPOPCNTDQ,RDPID>
  Structured Extended Features3=0x10000010<FSRM,L1DFL>
  Structured Extended Features4=0x20
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x791ef257<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,CPPC,PSFD,BTC_NO,IBPB_RET>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 10182062080 (9710 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 11 8 2 3 10 9 5 7 4 6
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xbad78000-0xbad78017
smbios0: Entry point: v3 (64-bit), Version: 3.5
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xb> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci1: <ACPI PCI bus> on pcib1
rge0: <RTL8125> port 0xf000-0xf0ff mem 0xdcc00000-0xdcc0ffff,0xdcc10000-0xdcc13fff at device 0.0 on pci1
rge0: chip rev: RTL8125B (0x64100000)
rge0: Ethernet address: 84:47:09:92:3a:23
pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
rge1: <RTL8125> port 0xe000-0xe0ff mem 0xdcb00000-0xdcb0ffff,0xdcb10000-0xdcb13fff at device 0.0 on pci2
rge1: chip rev: RTL8125B (0x64100000)
rge1: Ethernet address: 84:47:09:92:3a:24
pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xdca00000-0xdca03fff at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci0: <old, non-VGA display device> at device 3.2 (no driver attached)
pci0: <old, non-VGA display device> at device 3.3 (no driver attached)
pci0: <old, non-VGA display device> at device 3.4 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci4: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xd000-0xd0ff mem 0x7c00000000-0x7c0fffffff,0xdc000000-0xdc1fffff,0xdc500000-0xdc57ffff at device 0.0 on pci4
hdac0: <ATI (0x1640) HDA Controller> mem 0xdc588000-0xdc58bfff at device 0.1 on pci4
pci4: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xdc300000-0xdc3fffff at device 0.3 on pci4
xhci0: 64 bytes context size, 64-bit DMA
xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,DEBUG>
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc200000-0xdc2fffff at device 0.4 on pci4
xhci1: 64 bytes context size, 64-bit DMA
xhci1: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG>
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
hdac1: <AMD Raven HDA Controller> mem 0xdc580000-0xdc587fff at device 0.6 on pci4
pcib6: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci5: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 8.3 on pci0
pci6: <ACPI PCI bus> on pcib7
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xdc700000-0xdc7fffff at device 0.3 on pci6
xhci2: 64 bytes context size, 64-bit DMA
xhci2: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG>
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xdc600000-0xdc6fffff at device 0.4 on pci6
xhci3: 64 bytes context size, 64-bit DMA
xhci3: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG>
usbus3 on xhci3
usbus3: 5.0Gbps Super Speed USB v3.0
pci6: <serial bus, USB> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PLTF.C00C (20250807/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PLTF.C00D (20250807/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PLTF.C00E (20250807/dspkginit-605)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \134_SB_.PLTF.C00F (20250807/dspkginit-605)
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 2145968321 Hz quality 1000
Timecounters tick every 1.000 msec
ugen3.1: <AMD XHCI root HUB> at usbus3
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen2.1: <AMD XHCI root HUB> at usbus2
uhub0 on usbus3
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
uhub1 on usbus1
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub2 on usbus2
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
uhub3 on usbus0
uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme0: Allocated 16MB host memory buffer
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0
hdacc1: <Conexant (0x1f87) HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant (0x1f87) Audio Function Group> at nid 1 on hdacc1
pcm3: <Conexant (0x1f87) (Right Analog)> at nid 22 and 25 on hdaa1
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <GMK 512GB GT18c634 AA202606231425>
nda0: Serial Number AA202606231425
nda0: nvme version 1.4
nda0: 488386MB (1000215216 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 7 ports with 7 removable, self powered
ugen0.2: <MediaTek Inc. WirelessDevice> at usbus0
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
acpi_wmi1: <ACPI-WMI mapping> on acpi0
acpi_wmi1: Embedded MOF found
acpi_wmi2: <ACPI-WMI mapping> on acpi0
acpi_wmi2: Embedded MOF found
lo0: link state changed to UP
rge0: link state changed to DOWN
rge0: link state changed to UP
ubt0 on uhub3
ubt0: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 1> on usbus0
ubt1 on uhub3
ubt1: <MediaTek Inc. WirelessDevice, class 239/2, rev 2.10/1.00, addr 1> on usbus0
ubt1: ubt_attach:681: could not get two interfaces
device_attach: ubt1 attach returned 6
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
Security policy loaded: MAC/ntpd (mac_ntpd)
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.