Re: Console output during boot

> On May 2, 2026, at 01:49, Lars Tunkrans <[email protected]> wrote:
> 
>  Hi
> 
> 
>   the  RPI 4    has  two   mini-HDMI   connectors.
> Does   both  RPI4  use  the  same  HDMI  port  ?

Yes.  Both use the primary port.

> If the system with  the  issue  has console  connected  to  the secondary  HDMI port  .....
> could  be  the  cause.
> 
>  regards.
> 
> On 5/2/26 08:42, Doug Hardie wrote:
>> I have one server (Raspberry Pi 4) which during boot shows all the hardware configuration, but then stops until the Login prompt appears.  The other servers show the startup of each service and various other outputs.  There is a 10 minute gap on the one server and I would like to see where it is during that process for that time.  I have tried to find differences between the server configurations and haven't found the one that controls the startup output.  What controls that?  Thanks,
>> 
>> -- Doug
>> 
>> 
> -- 
> -------------------------
> Lars Tunkrans
> Oracle SPARC/Solaris System Administrator
> Fujitsu M12 SPARC Specilaist
> 
>