Re: CVS commit: src/sys/arch/hpcarm/conf

From: NONAKA Kimihiro <[email protected]>
Subject: CVS commit: src/sys/arch/hpcarm/conf
Date: Sun, 9 May 2010 02:03:35 +0000

> Modified Files:
> 	src/sys/arch/hpcarm/conf: WZERO3
> Log Message:
> Added 2 options for X.

after this change,my mobile phone WS011SH (runnnnning NetBSD!) can use 
USB kbd on X. many respects to NONAKA-san!!!
so, tar xzpvf pkgsrc.tar.gz nooow!

screen shot:
http://movapic.com/pic/201005091208054be6271515c93

dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.29 (WZERO3_011) #3: Sun May  9 11:51:32 JST 2010
        [email protected]:/usr/obj/hpcarm/sys/arch/hpcarm/compile/WZERO3_011
total memory = 128 MB
avail memory = 119 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: PXA27x rev 7 (XScale core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: 32KB/32B 32-way Instruction cache
cpu0: 32KB/32B 32-way write-back-locking Data cache
pxaip0 at mainbus0: PXA2x0 Onchip Peripheral Bus
pxaip0: CPU clock = 520.002 MHz
pxaip0: kernel is configured for PXA270, cpu type is PXA270
pxaintc0 at pxaip0 addr 0x40d00000-0x40d0001f: Interrupt Controller
pxagpio0 at pxaip0 addr 0x40e00000-0x40e0014f: GPIO Controller
com0 at pxaip0 addr 0x40100000-0x4010001f intr 22: ns16550a, working fifo
ohci0 at pxaip0 addr 0x4c000000-0x4c00006f intr 3
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
saost0 at pxaip0 addr 0x40a00000-0x40a0001f
saost0: SA-11x0 OS Timer
lcd0 at pxaip0: PXA2x0 LCD controller
lcd0: console
wsdisplay0 at lcd0 kbdmux 1: console (std, vt100 emulation)
wsmux1: connecting to wsdisplay0
pxadmac0 at pxaip0 addr 0x40000000-0x400002ff intr 25: DMA Controller
pxartc0 at pxaip0 addr 0x40900000-0x4090003b: PXA2x0 Real-time Clock
pxartc0: using wristwatch register
pxamci0 at pxaip0 addr 0x41100000-0x41100047: MMC/SD Controller
pxamci0: using DMA transfer
sdmmc0 at pxamci0
wzero3kbd0 at pxaip0: keyboard
hpckbd0 at wzero3kbd0
wskbd0 at hpckbd0: console keyboard, using wsdisplay0
wzero3usb0 at pxaip0: USB Mode detection
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
clock: hz=100 stathz=64
timecounter: Timecounter "saost_count" frequency 3250000 Hz quality 100
uhub0 at usb0: PXA27x OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ld0 at sdmmc0
ld0: 1862 MB, 945 cyl, 64 head, 63 sec, 512 bytes/sect x 3813376 sectors
aue0 at uhub0 port 2
aue0: I-O DATA DEVICE,INC. USB-ET/TX-S, rev 1.10/1.01, addr 2
aue0: Ethernet address 00:a0:b0:28:cf:d1
acphy0 at aue0 phy 1: ACXXX 10/100 media interface, rev. 0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs

---
jun ebihara