Re: iwm(4) broken on latest -current kernel

(Michael van Elst) <[email protected]> wrote:

> [email protected] (Kevin Bloom) writes:
> 
> >I have tried this with no avail. :(
> >Everything is fine using 11.99.3 but moving to the 11.99.4 kernel
> >is when it dies. It appears to temporarily connect to the network
> >but that status never goes to active. Someimtes it will stay
> >connected to the network but it will never successfully ping nor
> >will the status go active.
> 
> What RSSI values do you see ?
> 
> E.g.:
> 
> # wlanctl iwm1
> iwm1: mac xx:xx:xx:xx:xx:xx bss xx:xx:xx:xx:xx:xx
>         node flags 0005<bss,scan>
>         ess <XXXXXXX>
>         chan 36 freq 5180MHz flags 0340<ofdm,5GHz,passive scan>
>         capabilities 0011<ess,privacy>
>         beacon-interval 100 TU tsft 806540236859 us
>         rates [6.0] 9.0 12.0 18.0 24.0 36.0 48.0 54.0
>         assoc-id 49155 assoc-failed 0 inactivity 300s
>         rssi 72 txseq 173 rxseq 1072
> 
> It's probably better (lower) than the 72 here, but please have
> a look to be sure.

Here is my output:
iwm0: mac xx:xx:xx:xx:xx:xx bss xx:xx:xx:xx:xx:xx
	node flags 0005<bss,scan>
	ess <X>
	chan 48 freq 5240MHz flags 0340<ofdm,5GHz,passive scan>
	capabilities 1511<ess,privacy,short slot-time>
	beacon-interval 106 TU tsft 27472812091 us
	rates 6.0 9.0 12.0 18.0 24.0 36.0 48.0 [54.0]
	assoc-id 49157 assoc-failed 0 inactivity 300s
	rssi 69 txseq 7162 rxseq 21632