Re: Repeated panics on a Proliant 800 biproc with 1.6D kernel and 1.5.2 userland

Brett Lymn <[email protected]> Wed, 24 Jul 2002 23:03:54 +0930

Newsgroups	gmane.os.netbsd.devel.smp
Message-ID	<[email protected]>

On Wed, Jul 24, 2002 at 02:41:08PM +0200, Xavier HUMBERT wrote:
> 
> 5- Almost immediate panic. Actually, not a panic, but a NMI !
> (copied by hand, no serial console on the machine)
> 

Are you sure the memory is ok in the machine?  One of the things that
generates a NMI is a memory parity error.  You could try running
memtest86 over the memory and see if that picks up anything - or maybe
you have some out of spec memory.

-- 
Brett Lymn