MP interrupt problems with PRIMERGY RX300

I have a Fujitsu-Siemens PRIMERGY RX300 dual Xeon server (ServerWorks GC LE 
533 chipset) with an adaptec 2005 zcr raid card.

2.0 GENERIC.MPACPI or GENERIC.MPBIOS kernel boots ok with only one 
(physical) processor enabled in the bios. With hyperthreading enabled the 
ACPI kernel sees and uses the two virtual processors at apid 6 (BSP) and 
apid 7 (AP).
With both physical processors enabled either MP kernel fails to configure 
the iop device and reports lost interrupts from the rccide0 while probing 
the atapi bus. The cd drive on the atapi bus is correctly recognized. 
Kernels are built with INTRDEBUG and the dmesg output before the iop 
failure is essentially identical except for the extra cpus.

Anyone got any suggestions for further debugging? Dmesg output from the 
failing case follows.

NetBSD 2.0 (GENERIC.MPACPI) #2: Tue Dec 14 18:17:47 GMT 2004
	[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MPACPI
total memory = 3071 MB
avail memory = 2962 MB
BIOS32 rev. 0 found at 0xfd907
mainbus0 (root)
cpu0 at mainbus0: apid 6 (boot processor)
cpu0: Intel Xeon (686-class), 2400.21 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 16 page colors
cpu0: kstack at 0xd05db000 for 16384 bytes
cpu0: idle pcb at 0xd05db000, idle sp at 0xd05def98
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Xeon (686-class), 2400.10 MHz, id 0xf29
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu1: L2 cache 512 KB 64B/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: kstack at 0xd0668000 for 16384 bytes
cpu1: idle pcb at 0xd0668000, idle sp at 0xd066bf98
cpu2 at mainbus0: apid 1 (application processor)
cpu2: starting
cpu2: Intel Xeon (686-class), 2400.09 MHz, id 0xf29
cpu2: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu2: L2 cache 512 KB 64B/line 8-way
cpu2: ITLB 4K/4M: 64 entries
cpu2: DTLB 4K/4M: 64 entries
cpu2: kstack at 0xd0684000 for 16384 bytes
cpu2: idle pcb at 0xd0684000, idle sp at 0xd0687f98
cpu3 at mainbus0: apid 7 (application processor)
cpu3: starting
cpu3: Intel Xeon (686-class), 2400.09 MHz, id 0xf29
cpu3: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu3: L2 cache 512 KB 64B/line 8-way
cpu3: ITLB 4K/4M: 64 entries
cpu3: DTLB 4K/4M: 64 entries
cpu3: kstack at 0xd06a0000 for 16384 bytes
cpu3: idle pcb at 0xd06a0000, idle sp at 0xd06a3f98
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 11, 16 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec10000, virtual wire mode, version 11, 16 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040001>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: found root PCI bus 0 at level 1
mpacpi: found root PCI bus 1 at level 1
mpacpi: found root PCI bus 2 at level 1
mpacpi: found root PCI bus 3 at level 1
mpacpi: found root PCI bus 4 at level 1
mpacpi: 5 PCI busses
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 5<pol=1=Act 
Hi,trig=1=Edge>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags f<pol=3=Act 
Lo,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 
0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 
0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 
0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 
0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 
0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 
0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic1: pin 0 attached to pci0 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci0 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci0 device 8 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci0 device 8 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 12 attached to pci1 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 13 attached to pci1 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 14 attached to pci1 device 8 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 15 attached to pci1 device 8 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 13 attached to pci1 device 10 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 14 attached to pci1 device 10 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 15 attached to pci1 device 10 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 12 attached to pci1 device 10 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 14 attached to pci1 device 11 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 15 attached to pci1 device 11 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 12 attached to pci1 device 11 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 13 attached to pci1 device 11 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 15 attached to pci1 device 12 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 12 attached to pci1 device 12 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 13 attached to pci1 device 12 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 14 attached to pci1 device 12 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci2 device 0 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci2 device 0 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 8 attached to pci3 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 9 attached to pci3 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 10 attached to pci3 device 8 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 11 attached to pci3 device 8 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 10 attached to pci3 device 4 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 11 attached to pci3 device 4 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 10 attached to pci3 device 9 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 11 attached to pci3 device 9 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci4 device 8 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci4 device 8 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 6 attached to pci4 device 8 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 7 attached to pci4 device 8 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 6 attached to pci4 device 9 INT_A (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 7 attached to pci4 device 9 INT_B (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 4 attached to pci4 device 9 INT_C (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 5 attached to pci4 device 9 INT_D (type 0<type=0> flags 
f<pol=3=Act Lo,trig=3=Level>)
allocated pic ioapic0 type level pin 9 level 10 to cpu6 slot 16 idt entry 
160
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C0C [ACPI power button device] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not 
configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0A05 [Generic ACPI Bus] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not 
configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0A05 [Generic ACPI Bus] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x32)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CMIC-LE PCI/AGP bridge (rev. 0x00)
vga1 at pci0 dev 4 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
pchb3 at pci0 dev 15 function 0
pchb3: ServerWorks CSB6 ISA bridge (rev. 0xa0)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks CSB6 RAID/IDE Controller (rev. 0xa0)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 14 level 6 to cpu6 slot 14 idt entry 96
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 15 level 6 to cpu6 slot 15 idt entry 97
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks CSB6 USB Host Controller (rev. 
0x05)
allocated pic ioapic0 type level pin 9 level 6 to cpu6 slot 16 idt entry 98
ohci0: interrupting at ioapic0 pin 9 (irq 9)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 15 function 3
pcib0: ServerWorks CSB6 LPC bridge (rev. 0x00)
pchb4 at pci0 dev 16 function 0
pchb4: ServerWorks CIOB-E PCI-X bridge (rev. 0x12)
pci1 at pchb4 bus 1
pci1: i/o space, memory space enabled
pchb5 at pci0 dev 16 function 2
pchb5: ServerWorks CIOB-E PCI-X bridge (rev. 0x12)
pci2 at pchb5 bus 2
pci2: i/o space, memory space enabled
bge0 at pci2 dev 0 function 0: Broadcom BCM5704C Dual Gigabit Ethernet
allocated pic ioapic1 type level pin 2 level 7 to cpu6 slot 11 idt entry 112
bge0: interrupting at ioapic1 pin 2 (irq 11)
bge0: ASIC BCM5704 A2 (0x2002), Ethernet address 00:30:05:3f:bd:7b
brgphy0 at bge0 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy0: using BCM5704 DSP patch
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
bge1 at pci2 dev 0 function 1: Broadcom BCM5704C Dual Gigabit Ethernet
allocated pic ioapic1 type level pin 3 level 7 to cpu6 slot 10 idt entry 113
bge1: interrupting at ioapic1 pin 3 (irq 10)
bge1: ASIC BCM5704 A2 (0x2002), Ethernet address 00:30:05:3f:bd:7c
brgphy1 at bge1 phy 1: BCM5704 1000BASE-T media interface, rev. 0
brgphy1: using BCM5704 DSP patch
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
pchb6 at pci0 dev 17 function 0
pchb6: ServerWorks CIOB-X2 PCI-X bridge (rev. 0x05)
pci3 at pchb6 bus 3
pci3: i/o space, memory space enabled
iop0 at pci3 dev 8 function 0: allocated pic ioapic1 type level pin 8 level 
6 to cpu6 slot 5 idt entry 99
I2O adapter <ADAPTEC 2010S>
iop0: interrupting at ioapic1 pin 8 (irq 5)
pchb7 at pci0 dev 17 function 2
pchb7: ServerWorks CIOB-X2 PCI-X bridge (rev. 0x05)
pci4 at pchb7 bus 4
pci4: i/o space, memory space enabled
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
allocated pic ioapic0 type edge pin 4 level 13 to cpu6 slot 4 idt entry 208
com1 at isa0 port 0x2f8-0x2ff irq
alocated pic ioapic0 type edge pin 3 level 13 to cpu6 slot 3 idt entry 209
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
allocated pic ioapic0 type edge pin 1 level 9 to cpu6 slot 1 idt entry 144
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pmsprobe: reset error 5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
allocated pic ioapic0 type edge pin 6 level 6 to cpu6 slot 6 idt entry 100
isapnp0: no ISA Plug 'n Play devices found
cpu6: interrupt masks:
IPL 0 mask 7fe3385 unmask f801cc7a
IPL 1 mask 7fe3385 unmask f801cc7a
IPL 2 mask 7fe3385 unmask f801cc7a
IPL 3 mask 7fe3385 unmask f801cc7a
IPL 4 mask 27fe3385 unmask d801cc7a
IPL 5 mask 37fe3385 unmask c801cc7a
IPL 6 mask 37fff3e5 unmask c8000c1a
IPL 7 mask 37ffffe5 unmask c800001a
IPL 8 mask 3fffffe5 unmask c000001a
IPL 9 mask 3fffffe7 unmask c0000018
IPL 10 mask 3fffffe7 unmask c0000018
IPL 11 mask 3fffffe7 unmask c0000018
IPL 12 mask 7fffffe7 unmask 80000018
IPL 13 mask 7fffffff unmask 80000000
IPL 14 mask ffffffff unmask 0
IPL 15 mask ffffffff unmask 0
cpu6 source 1 is pin 1 from pic ioapic0 maxlevel 9
	handler 0xc0277f44 level 9
cpu6 source 3 is pin 3 from pic ioapic0 maxlevel 13
	handler 0xc027646c level 13
cpu6 source 4 is pin 4 from pic ioapic0 maxlevel 13
	handler 0xc027646c level 13
cpu6 source 5 is pin 8 from pic ioapic1 maxlevel 6
	handler 0xc045e9a8 level 6
cpu6 source 6 is pin 6 from pic ioapic0 maxlevel 6
	handler 0xc0535070 level 6
cpu6 source 10 is pin 3 from pic ioapic1 maxlevel 7
	handler 0xc04d8c48 level 7
cpu6 source 11 is pin 2 from pic ioapic1 maxlevel 7
	handler 0xc04d8c48 level 7
cpu6 source 14 is pin 14 from pic ioapic0 maxlevel 6
	handler 0xc0482f58 level 6
cpu6 source 15 is pin 15 from pic ioapic0 maxlevel 6
	handler 0xc0482f58 level 6
cpu6 source 16 is pin 9 from pic ioapic0 maxlevel 10
	handler 0xc05ad4e0 level 10
	handler 0xc02a44a0 level 6
cpu6 source 27 is pin 0 from pic softintr_fakepic maxlevel 8
	handler 0x0 level 8
cpu6 source 28 is pin 0 from pic softintr_fakepic maxlevel 5
	handler 0x0 level 5
cpu6 source 29 is pin 0 from pic softintr_fakepic maxlevel 4
	handler 0x0 level 4
cpu6 source 30 is pin 0 from pic lapic maxlevel 12
	handler 0x0 level 12
cpu6 source 31 is pin 0 from pic lapic maxlevel 14
	handler 0x0 level 14
cpu7: interrupt masks:
IPL 0 mask 7ffffff unmask f8000000
IPL 1 mask 7ffffff unmask f8000000
IPL 2 mask 7ffffff unmask f8000000
IPL 3 mask 7ffffff unmask f8000000
IPL 4 mask 27ffffff unmask d8000000
IPL 5 mask 37ffffff unmask c8000000
IPL 6 mask 37ffffff unmask c8000000
IPL 7 mask 37ffffff unmask c8000000
IPL 8 mask 3fffffff unmask c0000000
IPL 9 mask 3fffffff unmask c0000000
IPL 10 mask 3fffffff unmask c0000000
IPL 11 mask 3fffffff unmask c0000000
IPL 12 mask 7fffffff unmask 80000000
IPL 13 mask 7fffffff unmask 80000000
IPL 14 mask ffffffff unmask 0
IPL 15 mask ffffffff unmask 0
cpu7 source 27 is pin 0 from pic softintr_fakepic maxlevel 8
	handler 0x0 level 8
cpu7 source 28 is pin 0 from pic softintr_fakepic maxlevel 5
	handler 0x0 level 5
cpu7 source 29 is pin 0 from pic softintr_fakepic maxlevel 4
	handler 0x0 level 4
cpu7 source 30 is pin 0 from pic lapic maxlevel 12
	handler 0x0 level 12
cpu7 source 31 is pin 0 from pic lapic maxlevel 14
	handler 0x0 level 14
cpu1: interrupt masks:
IPL 0 mask 7ffffff unmask f8000000
IPL 1 mask 7ffffff unmask f8000000
IPL 2 mask 7ffffff unmask f8000000
IPL 3 mask 7ffffff unmask f8000000
IPL 4 mask 27ffffff unmask d8000000
IPL 5 mask 37ffffff unmask c8000000
IPL 6 mask 37ffffff unmask c8000000
IPL 7 mask 37ffffff unmask c8000000
IPL 8 mask 3fffffff unmask c0000000
IPL 9 mask 3fffffff unmask c0000000
IPL 10 mask 3fffffff unmask c0000000
IPL 11 mask 3fffffff unmask c0000000
IPL 12 mask 7fffffff unmask 80000000
IPL 13 mask 7fffffff unmask 80000000
IPL 14 mask ffffffff unmask 0
IPL 15 mask ffffffff unmask 0
cpu1 source 27 is pin 0 from pic softintr_fakepic maxlevel 8
	handler 0x0 level 8
cpu1 source 28 is pin 0 from pic softintr_fakepic maxlevel 5
	handler 0x0 level 5
cpu1 source 29 is pin 0 from pic softintr_fakepic maxlevel 4
	handler 0x0 level 4
cpu1 source 30 is pin 0 from pic lapic maxlevel 12
	handler 0x0 level 12
cpu1 source 31 is pin 0 from pic lapic maxlevel 14
	handler 0x0 level 14
cpu0: interrupt masks:
IPL 0 mask 7ffffff unmask f8000000
IPL 1 mask 7ffffff unmask f8000000
IPL 2 mask 7ffffff unmask f8000000
IPL 3 mask 7ffffff unmask f8000000
IPL 4 mask 27ffffff unmask d8000000
IPL 5 mask 37ffffff unmask c8000000
IPL 6 mask 37ffffff unmask c8000000
IPL 7 mask 37ffffff unmask c8000000
IPL 8 mask 3fffffff unmask c0000000
IPL 9 mask 3fffffff unmask c0000000
IPL 10 mask 3fffffff unmask c0000000
IPL 11 mask 3fffffff unmask c0000000
IPL 12 mask 7fffffff unmask 80000000
IPL 13 mask 7fffffff unmask 80000000
IPL 14 mask ffffffff unmask 0
IPL 15 mask ffffffff unmask 0
cpu0 source 27 is pin 0 from pic softintr_fakepic maxlevel 8
	handler 0x0 level 8
cpu0 source 28 is pin 0 from pic softintr_fakepic maxlevel 5
	handler 0x0 level 5
cpu0 source 29 is pin 0 from pic softintr_fakepic maxlevel 4
	handler 0x0 level 4
cpu0 source 30 is pin 0 from pic lapic maxlevel 12
	handler 0x0 level 12
cpu0 source 31 is pin 0 from pic lapic maxlevel 14
	handler 0x0 level 14
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic1: enabling
ioapic1: int2 a170<vector=70,delmode=1,actlo,level,dest=0> 6000000<target=6>
ioapic1: int3 a171<vector=71,delmode=1,actlo,level,dest=0> 6000000<target=6>
ioapic1: int8 a163<vector=63,delmode=1,actlo,level,dest=0> 6000000<target=6>
ioapic0: enabling
ioapic0: int1 190<vector=90,delmode=1,dest=0> 6000000<target=6>
ioapic0: int3 1d1<vector=d1,delmode=1,dest=0> 6000000<target=6>
ioapic0: int4 1d0<vector=d0,delmode=1,dest=0> 6000000<target=6>
ioapic0: int6 164<vector=64,delmode=1,dest=0> 6000000<target=6>
ioapic0: int9 a162<vector=62,delmode=1,actlo,level,dest=0> 6000000<target=6>
ioapic0: int14 160<vector=60,delmode=1,dest=0> 6000000<target=6>
ioapic0: int15 161<vector=61,delmode=1,dest=0> 6000000<target=6>
iop0: configuring...
iop0: unable to retrieve HRT
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
raidattach: Asked for 8 units
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
rccide0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
cd0 at atapibus0 drive 0: <SR244W, , T01A> cdrom removable
rccide0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
rccide0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
cd0: 32-bit data port
rccide0:1:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
cd0: drive supports PIO mode 4rccide0:1:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, DMA mode 2rccide0:1:0: lost interrupt
	type: ata tc_bcount: 0 tc_skip: 0
, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) 
(using DMA data transfers)
Searching for RAID components...
boot device: <unknown>
root device: reboot
syncing disks... done
shutting down iop devices... done
rebooting...
~


Peter O'Kane                            E-mail:[email protected]
Information Technology Department,      Voice: +353 91 492527
National University of Ireland, Galway. Fax: +353 91 494501