Re: SMP stability issues

On Sun, 12 Nov 2006 00:11:39 +0100, Manuel Bouyer <[email protected]=
> wrote:
> What chipset does this motherboard have ? Can you post the dmesg ?
>=20
> Also, you could try to build a kernel with DIAGNOSTIC, DEBUG and LOCKDE=
BUG
> options. A hard hang like that could be a deadlock in the kernel;
> one of these options may help to find what's going on.
>=20
> --
> Manuel Bouyer <[email protected]>
>      NetBSD: 26 ans d'experience feront toujours la difference
> --

Well, I just tried running GENERIC.MPACPI like some of the others suggest=
ed, however it is still locking up. Here is the dmesg from GENERIC.MPACPI=
 (although it looks like I might need to check my ACPI configuration in t=
he BIOS. I will also try a kernel with DIAGNOSTIC, DEBUG and LOCKDEBUG en=
abled as you suggested. Is it likely to matter whether or not ACPI is ena=
bled in the test kernel?

Thanks,
Chris.


NetBSD 3.1_STABLE (GENERIC.MPACPI) #0: Sat Nov 11 10:18:33 EST 2006
        [email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MPAC=
PI
total memory =3D 511 MB
avail memory =3D 492 MB
BIOS32 rev. 0 found at 0xfb340
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium III (686-class), 865.29 MHz, id 0x686
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-0686-0003-8754-64B0-C402
cpu0: calibrating local timer
cpu0: apic clock running at 133 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 865.25 MHz, id 0x686
cpu1: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu1: features 387fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 256 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu1: serial number 0000-0686-0003-FE6E-375F-F1CD
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <VIA694,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI Bus] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not confi=
gured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
npx0 at acpi0 (PNP0C04)
npx0: io 0xf0-0xff irq 13
npx0: using exception 16
com0 at acpi0 (PNP0501-1)
com0: io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
com1 at acpi0 (PNP0501-2)
com1: io 0x2f8-0x2ff irq 3
com1: ns16550a, working fifo
lpt0 at acpi0 (PNP0401)
lpt0: io 0x378-0x37f,0x778-0x77b irq 7 drq 3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C691 (Apollo Pro) Host-PCI (rev. 0xc4)
agp0 at pchb0: aperture at 0xd0000000, size 0xf000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) CP=
U-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Silicon Integrated System 6326 AGP VGA (re=
v. 0x0b)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C686A PCI-ISA Bridge (rev. 0x40)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: VIA Technologies VT83C572 USB Controller =
(rev. 0x16)
uhci0: interrupting at ioapic0 pin 12 (irq 12)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: VIA Technologies VT83C572 USB Controller =
(rev. 0x16)
uhci1: interrupting at ioapic0 pin 12 (irq 12)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies VT82C686A SMBus Controller (miscellaneous bridge, revisi=
on 0x40) at pci0 dev 7 function 4 not configured
adv1 at pci0 dev 9 function 0: AdvanSys ABP-9xxU SCSI adapter
adv1: interrupting at ioapic0 pin 16 (irq 11)
scsibus0 at adv1: 8 targets, 8 luns per target
ex0 at pci0 dev 13 function 0: 3Com 3cSOHO100-TX 10/100 Ethernet (rev. 0x=
30)
ex0: interrupting at ioapic0 pin 18 (irq 10)
ex0: MAC address 00:04:76:36:cf:be
ex0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, default 10baseT
hptide0 at pci0 dev 14 function 0
hptide0: Triones/Highpoint HPT370 IDE Controller
hptide0: bus-master DMA support present
hptide0: primary channel wired to native-PCI mode
hptide0: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus2 at hptide0 channel 0
hptide0: secondary channel wired to native-PCI mode
atabus3 at hptide0 channel 1
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <Maxtor 6E030L0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29325 MB, 59582 cyl, 16 head, 63 sec, 512 bytes/sect x 60058656 sect=
ors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA)
wd1 at atabus1 drive 0: <Maxtor 6E030L0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 29325 MB, 59582 cyl, 16 head, 63 sec, 512 bytes/sect x 60058656 sect=
ors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA)
wd2 at atabus2 drive 0: <WDC WD800BB-00FJA0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 se=
ctors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at atabus2 drive 1: <WDC WD800BB-00JHA0>
wd3: drive supports 16-sector PIO transfers, LBA addressing
wd3: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 se=
ctors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(hptide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA)
wd3(hptide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA)
wd4 at atabus3 drive 0: <WDC WD1600JB-00GVC0>
wd4: drive supports 16-sector PIO transfers, LBA48 addressing
wd4: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sect=
ors
wd4: 32-bit data port
wd4: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd4(hptide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA)
st0 at scsibus0 target 6 lun 0: <ARCHIVE, Python 02635-XXX, 596A> tape re=
movable
st0: drive empty
st0: sync (100.00ns offset 15), 8-bit (10.000MB/s) transfers
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 60058496 (29325 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

[EOF]