Re: NetBSD/macppc 10.0 ISO (Re: bootable mac68k iso)

On 6/5/24 11:12 AM, Izumi Tsutsui wrote:
> (Cc'ed to port-macppc and drop port-mac68k)
> 
> 
>> FYI.. I tried booting the NetBSD 10.0 CD for macppc yesterday on a
>> PowerBook G4 12" (with OF 3). The ISO, burned as a hybrid CD, would not
>> boot (by pressing the "C" key at boot or by selecting the CD option in
>> the Yaboot menu).
> 
> Is it from https://cdn.netbsd.org/pub/NetBSD/NetBSD-10.0/images/ ?

It was from here:

https://cdn.netbsd.org/pub/NetBSD/NetBSD-10.0/images/NetBSD-10.0-macppc.iso


>> I was able to boot what looked like the initial
>> bootloader from OF using:
>>
>> 0 > boot cd:,\ofwboot.xcf netbsd.macppc
>>
>> But the installation kernel did not seem to boot.
> 
> How does it fail? Any error messages?

Yes, there were errors in Open Firmware:

0 > boot cd:,\ofwboot.xcf netbsd.macppc
loading XCOFF
tsize=10200 dsize=23c bsize=28f5 entry=e0000
...
loading .text
CLAIM failed
0 > ok


> NetBSD/macppc FAQ might help:
>  https://www.netbsd.org/ports/macppc/faq.html
>  https://www.netbsd.org/ports/macppc/models.html


As far as I can tell, I'm booting from OF correctly.


> ...
> There are several changes to ofwboot (and also ofwboot.xcf)
> between NetBSD 9.0 and 10.0,
>  https://gnats.netbsd.org/58284
> so it might also be worth to check if 9.4 ISO works or not.
> ...

I also tried NetBSD 9.4, downloaded from here:
https://cdn.netbsd.org/pub/NetBSD/NetBSD-9.4/iso/NetBSD-9.4-macppc.iso

It also failed, but it went a little further:

0 > boot cd:,\ofwboot.xcf netbsd.macppc
loading XCOFF
tsize=f660 dsize=258 bsize=2750 entry=e0000
...
>>NetBSD/macppc OpenFirmware Boot, Revision 1.13 (Sat Apr 20 13:32:22
UTC 2024)
6587420+126944=0x6677c0
start=0x100000
Decrementer exception at %SRR0: bf61ffec  %SRR1: 40003030
0 > ok

I may be able to capture all of the text in a serial console or a telnet
session, if that would be helpful, though I'll have to learn how to do that.

-Stan