Re: NetBSD Gateway with dynamic IP
Manuel Bouyer <[email protected]>
| Newsgroups | gmane.os.netbsd.help |
|---|---|
| Message-ID | <[email protected]> |
On Thu, Feb 08, 2007 at 11:25:00AM -0300, daniel veiga wrote: > Hello, > > I have this configuration of my home-network: > > Netbsd 3.0 > my kernel was net.inet.ip.forwading=1 > > ex0 > ip 192.168.1.1 - its my internal network, this IP i > put manually, connect with xinXP > > vr0 > ip dynamic (internet link) - I get the IP through the > command: $sudo dhclient > > My ipnat.conf is > map ex0 192.168.1.0/24 -> 0/32 portmap tcp/udp > 40000:60000 > map ex0 192.168.1.0/24 -> 0/32 > i tried to put vr0 and does not work to. This needs to be vr0. This won't work with ex0 in your setup. > > to up ipnat.conf, i use this command: sudo > /etc/rc.d/ipnat start You also need to start ipfilter before ipnat: /etc/rc.d/ipfilter start for this you need an empty /etc/ipf.conf -- Manuel Bouyer <[email protected]> NetBSD: 26 ans d'experience feront toujours la difference --