Re: HELP with ViewSonic vx1935wm LCD

Paul Newhouse <[email protected]>
Newsgroups gmane.os.netbsd.help
Message-ID <[email protected]>
>  
>  Check
>  
>  http://john.fremlin.de/programs/linux/read-edid/
>
>  Should be in Pkgsrc; let me know if-not.

Found modeline way/weigh/whey too obvious.


>  Also, there is another utility out there, the name escapes me.  It's all 
>  in-band control data for modelines on the VGA signal.

xvidtune shows that I get 1280x1024 no matter what is in XF86Config.
Very strange.

Thanks,
Paul


>  ~BAS
>  
>  On Tue, 20 Feb 2007, Paul Newhouse wrote:
>  
>  > Running NetBSD 3.0.1 & 3.1
>  > Graphics card is an old 3Dfx Interactive Voodoo3
>  >
>  > Does anyone have a good modeline for this monitor?
>  >
>  >  ViewSonic VX1935wm LCD
>  >
>  > TIA,
>  > Paul
>  >
>  >
>  
>  l8*
>   	-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
>   	       http://www.spiritual-machines.org/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.