SOLVED (although I wanted to verify what I did) Re: upgrading to 4.0

DataZap <[email protected]>
Newsgroups gmane.os.netbsd.help
Message-ID <[email protected]>
Hi,

I did a manual install of 4.0 on a system running 2.1, but putting in a
4.0 kernel, then rebooting and unpacking all the tar balls. I then
cd /dev and ./MAKEDEV all. I then built a kernel and tried to build the
source tree. This is where I went wrong, I was trying to built it with
make build and it won't work that way now. Using ./build build works.
Although I still had a problem with installing libs that are older than
what is there. So, added NOCHECKVER=YES to my mk.conf.

I just wanted to make sure there was nothing that I missed in this. It has
been so long since I have done an install, I am just afraid it that I may
have forgotten something.

Thanks,
Al


> On Tue, 22 May 2007 [email protected] wrote:
>
> > Date: Tue, 22 May 2007 10:05:28 +0100
> > From: [email protected]
> > To: DataZap <[email protected]>, [email protected]
> > Subject: Re: upgrading to 4.0
> >
> > [email protected] wrote:
> > > Hi,
> > >
> > > I googled, but I wasn't able to find any documentation on how to upgrade
> > > to 4.0. Could someone either provide me a link or give some instructions
> > > on how to do this?
> > >
> > > Thanks,
> > > Al
> > >
> >
> > NetBSD 4.0 hasn't been released yet, but a beta version is available
> > from the FTP site and mirrors. Regular builds can be found at:
> >
> > ftp://ftp.<mirror>.netbsd.org/pub/NetBSD-daily/netbsd-4/
> >
> > Just replace "<mirror>" with a suitable country code (the complete
> > list of mirrors is at http://www.netbsd.org/mirrors/#ftp). Download
> > either an ISO image, or just the boot floppy images if you have a
> > floppy drive and can do a network install. A guide to burning a
> > bootable CD-ROM is at http://www.netbsd.org/Documentation/bootcd.html,
> > and the INSTALL files describe in considerable detail how to start the
> > installation procedure.
> >
> > Although NetBSD 4.0 is still at the beta stage, I am using it on
> > several machines without any problems as are many others.
> >
> > Chris
> >
> >
> >
>
>
>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.