Re: Yes, NetBSD still boots on pretty ancient Alphas...

On 2021. 07. 29. 16:23, Jason Thorpe wrote:
>>
>>
>> Removed "DEPCA_CSR_DUM | " recompiled, but nothing has changed. 
> Hrmph. Ok. Well, I've managed to track down an ISA version of this 
> card (a DE202). Once it arrives I'll be able to debug a bit more 
> directly on my AXPpci33.
> -- thorpej 
Update:

I have found another DE205 and it works :)


[     1.000000] eisa0 at jensenio0
[     1.000000] Compaq QVision 1024/E Graphics Controller at eisa0 slot 
1 not configured
[     1.000000] ahb0 at eisa0 slot 6: Adaptec AHA-1742A SCSI
[     1.000000] ahb0: interrupting at eisa irq 12 (edge trigger)
[     1.000000] scsibus0 at ahb0: 8 targets, 8 luns per target
[     1.000000] isa0 at jensenio0
[     1.000000] lc0 at isa0 port 0x300-0x31f iomem 0xd0000-0xd07ff irq 
5: DE205-AC
[     1.000000] lc0: address 08:00:2b:9f:fc:8c, 128KB RAM, 2KB window
[     1.000000] attimer0 at isa0 port 0x40-0x43
[     1.000000] vga0 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
[     1.000000] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 
emulation), using wskbd0
[     1.000000] wsmux1: connecting to wsdisplay0
[     1.000000] vga1 at isa0 port 0x3b0-0x3df iomem 0xa0000-0xbffff
[     1.000000] wsdisplay1 at vga1 kbdmux 1

However I have to remove the EISA DE422 because if it is in, then there 
is no activity on the DE205. Strange, but I am unable to find out what 
causes this.

What I have figured out is that the DE205 should be at IRQ5 and 2K 
(starting at: D0000) as it is factory configured and to reconfigure I 
have to find a ISA PC to run the setup utility.

So I have tried some other EISA settings on the DE422 to have both cards 
in the machine.

One time when I configured with 32K (the default is 64K) surprisingly 
there were no error message at depca2, but there were no link on the 
DE205...

[   1.0000000] depca2 at eisa0 slot 4: DEC DE422 Ethernet
[   1.0000000] depca2: shared memory at 0xe0000-0xeffff
[   1.0000000] le0 at depca2
le0: address 08:00:2b:3d:48:f1
[   1.0000000] le0: 32 receive buffers, 8 transmit buffers
[   1.0000000] depca2: interrupting at edge (eisa irq 10 trigger)


br,

--

istvan